Visiboard Ltd United Kingdom

A range of pre primed/coated rigid substrate(plywoodmdf, hardboard etc. ) especially treated with a special coating(patentspending and trademark granted) suitable for flatbed digital, conventional screen printing as well as vinyl cut-outs. The concept of visiboard? Introduction. New age flat bed inkjet printers which are designed to print directly onto almost everything that the screen printer or sign maker demands, from paper to sheet steel. However, although these types of technology can print onto most substrates, it has been found that a large number of substrates would not allow the ink to adhere to them and their long-term adhesion is poor. Visiboard The products will be used as external or internal substrate for the purpose of high profile branding/profiling and point of sale advertising using the new flatbed inkjet technologies as well as conventional screen printing visiboard can be matched to almost any colour The advertising and point of sale industry and is worth tens of millions of pounds per annum and wide format digital printing representing a large sector. The development in wide format printing onto rigid substrate will allow new opportunities. Examples would be MD, hardboard&plywood substrate digitally printed for use in medium to long-term shop fitting, hoardings or signage. A need for a mdf/plywood substrate. There is a need for an external white faced flat mdf/plywood aimed at an internal/external advertising, branding and profiling market. A window of opportunity has arisen in to profile and brand shop fittings site hoardings and shop signage owing to new technologies in direct flatbed digital print, especially medium and long-term from six months to 4 years' duration. This market is driven by a need to brand and profile. Research has shown that there is a desperate need to print short run high quality digital image dirtctly onto rigid substrates to compete for an existing market, which is currently satisfied by short run silkscreen printing, four colour printed vinyl graphics and polly vinyl cut-outs. The new technology compares very favourably from 1 to 100 units and a 1 off savings from 30 to 80 per cent of the cost of traditional methods. Mdf substrate Is suitable for internal or external use. Plywood substrate Aimed at the construction market with its growing demand for secure, yet aesthetically pleasing site hoardings, this board is faced on one side with a pre-coated mdo. This presents the contractor with large savings in time; materials and labour as well as producing a far superior finish than achievable by hand. Is suitable for internal or external use