Intended Application patients with skin diseases of vitiligo, psoriasis, pityriasis rosea, eczema are suitable for the ultraviolet irradiation treatment. Products are designed for treatment by patients themselves at home under doctor\\\'s guidance. Feature s l (1) Small size, lig
Kernel Medical Equipment Co.,Ltd [2017-05-24 10:53:51 ]
PRODUCTION PROCESS with the nitric acid etching one side or both sides of the glass to obtain concave-convex effect, it can also be tempered. FEATURE 1. Distinctive, uniformly smooth and satin-like appearance 2. Same light transmittance as the equivalent thickness of ordinary flo
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:48:24 ]
PRODUCTION PROCESS In the production of flat glass, the molten silica-based mix is cooled slowly under carefully controlled conditions. This annealing procedure removes undesirable stresses from the glass. Cooling occurs in an annealing \"lehr\"; and then annealed glass is heated
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:47:56 ]
Including low iron float glass and low iron patterned glass. LOW IRON FLOAT GLASS BRIEF INTRODUCTION Low iron float glass is also called ultra clear glass, high transmittance glass. It is a new type of high grade glass that has high performance and multifunction. It has the chara
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:47:24 ]
Borosilicate Float Glass2.6(BG26) Characteristics 1.Great heat resitance performance, stable chemical property; 2.High light transmission. Application 1.Household electrical appliance. 2.Fireplace glass. Technical Data Dimensions(mm) 1200x600,1200x900,1200x1800,othe format upon r
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:46:56 ]
PRODUCTION PROCESS Using the high quality raw materials from both domestic and abroad ,such as the silica sand ,soda ash,salt cake, dolomite,etc. as our material and then sent to furnace after accurate weighting, checking and mixing, with heavy oil as fuel. They are melted into g
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:46:24 ]
PRODUCTION PROCESS The same as in float glass production. The only variation is the colorants mixed at the beginning with the standard raw materials. Different additives may produce differently colored glasses. FEATURE 1. It can be bent, tempered or heat strengthened and in addit
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:45:54 ]
PRODUCTION PROCESS Insulated glass (IGU) is also called multi-layered glass. It is composed of two sheets of float glass or other kinds of glass, between the two sheets of glass, there is an aluminum spacer filled with desiccant. The aluminum spacer and sheets of glass are adhere
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:44:56 ]
PRODUCTION PROCESS Insulated glass (IGU) is also called multi-layered glass. It is composed of two sheets of float glass or other kinds of glass, between the two sheets of glass, there is an aluminum spacer filled with desiccant. The aluminum spacer and sheets of glass are adhere
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:43:59 ]
PRODUCTION PROCESS What\'s Low-E Glass? Low emissivity coated glass is also called Low-E glass. There are two types of Low-E glass hard coat and soft coat. Hard coat Low-E glass is manufactured by pouring a thin layer of molten tin onto a sheet of glass while the glass is still s
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:43:31 ]
PRODUCTION PROCESS It is manufactured by permanently bonding two or more lites of glass with layers of polyvinyl butyral (PVB) interlayer, under heat and pressure, to create a single construction. FEATURE 1. Safety. Even if the glass is broken, the tough interlayer film prevents
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:42:28 ]
PRODUCTION PROCESS In the production of flat glass, the molten silica-based mix is cooled slowly under carefully controlled conditions. This annealing procedure removes undesirable stresses from the glass. Cooling occurs in an annealing \"lehr\"; and then annealed glass is heated
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:41:51 ]
PRODUCTION PROCESS In the production of flat glass, the molten silica-based mix is cooled slowly under carefully controlled conditions. This annealing procedure removes undesirable stresses from the glass. Cooling occurs in an annealing \"lehr\"; and then annealed glass is heated
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:41:19 ]
PRODUCTION PROCESS In the production of flat glass, the molten silica-based mix is cooled slowly under carefully controlled conditions. This annealing procedure removes undesirable stresses from the glass. Cooling occurs in an annealing \"lehr\"; and then annealed glass is heated
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:40:47 ]
PRODUCTION PROCESS Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, etc. as our material and then sent to furnace after accurate weighting, checking and mixing, with heavy oil as fuel. They are melted into
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:40:15 ]
3 4 5 6 8mm Clear Mistlite Patterned Glass for window furniture door PRODUCTION PROCESS Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, etc. as our material and then sent to furnace after accurate weighti
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:27:09 ]
1.Specifications (1) one lamp (2)PUVA light (3)Psoriasis,vitiligo pityriasis rosea and eczema (4)Simple operation,low price (5)With CE 2.UV Phototherapy lamp (1) safe equipment for handheld home use device (2) One unit lamp for home use (3)Philips PUVA lamp (4)Psoriasis,vitiligo
Kernel Medical Equipment Co.,Ltd [2017-05-24 10:26:43 ]
PRODUCTION PROCESS Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, etc. as our material and then sent to furnace after accurate weighting, checking and mixing, with heavy oil as fuel. They are melted into
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:23:52 ]
PRODUCTION PROCESS Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, etc. as our material and then sent to furnace after accurate weighting, checking and mixing, with heavy oil as fuel. They are melted into
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:22:47 ]
PRODUCTION PROCESS Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, etc. as our material and then sent to furnace after accurate weighting, checking and mixing, with heavy oil as fuel. They are melted into
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:21:23 ]
