Please input queries on the search bar

6.38mm Laminated glass insulation glass Soundproof glass Radiant glass Safety glass

PRODUCTION PROCESS It is manufactured by permanently bonding two or more lites of glass with layers of polyvinyl butyral (PVB) interlayer, under heat and pressure, to create a single construction. FEATURE 1. Safety. Even if the glass is broken, the tough interlayer film prevents

A&T INDUSTRY TRADE CO.,LTD      [2017-05-24 10:42:28 ]

Tempered glass Toughened glass Safety glass processed glass Polished

PRODUCTION PROCESS In the production of flat glass, the molten silica-based mix is cooled slowly under carefully controlled conditions. This annealing procedure removes undesirable stresses from the glass. Cooling occurs in an annealing \"lehr\"; and then annealed glass is heated

A&T INDUSTRY TRADE CO.,LTD      [2017-05-24 10:41:51 ]

3-19mm Toughened glass/Safety glass building glass for window Furniture bathromm glass

PRODUCTION PROCESS In the production of flat glass, the molten silica-based mix is cooled slowly under carefully controlled conditions. This annealing procedure removes undesirable stresses from the glass. Cooling occurs in an annealing \"lehr\"; and then annealed glass is heated

A&T INDUSTRY TRADE CO.,LTD      [2017-05-24 10:41:19 ]

12mm Tempered glass/Safety glass with polished edge for bathroom Furniture glass

PRODUCTION PROCESS In the production of flat glass, the molten silica-based mix is cooled slowly under carefully controlled conditions. This annealing procedure removes undesirable stresses from the glass. Cooling occurs in an annealing \"lehr\"; and then annealed glass is heated

A&T INDUSTRY TRADE CO.,LTD      [2017-05-24 10:40:47 ]

4 6 8mm Clear Nashiji Patterned Glass for window furniture door

PRODUCTION PROCESS Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, etc. as our material and then sent to furnace after accurate weighting, checking and mixing, with heavy oil as fuel. They are melted into

A&T INDUSTRY TRADE CO.,LTD      [2017-05-24 10:40:15 ]

3 4 5 6 8mm Clear Mistlite Patterned Glass for window furniture door

3 4 5 6 8mm Clear Mistlite Patterned Glass for window furniture door PRODUCTION PROCESS Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, etc. as our material and then sent to furnace after accurate weighti

A&T INDUSTRY TRADE CO.,LTD      [2017-05-24 10:27:09 ]

UV phototherapy 311nm narrow band uvb lamp for eczema treatment

1.Specifications (1) one lamp (2)PUVA light (3)Psoriasis,vitiligo pityriasis rosea and eczema (4)Simple operation,low price (5)With CE 2.UV Phototherapy lamp (1) safe equipment for handheld home use device (2) One unit lamp for home use (3)Philips PUVA lamp (4)Psoriasis,vitiligo

Kernel Medical Equipment Co.,Ltd      [2017-05-24 10:26:43 ]

3 4 5 6 8mm Clear Diamond Patterned Glass for window furniture door

PRODUCTION PROCESS Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, etc. as our material and then sent to furnace after accurate weighting, checking and mixing, with heavy oil as fuel. They are melted into

A&T INDUSTRY TRADE CO.,LTD      [2017-05-24 10:23:52 ]

4mm Blue Flora Patterned Glass for window furniture door

PRODUCTION PROCESS Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, etc. as our material and then sent to furnace after accurate weighting, checking and mixing, with heavy oil as fuel. They are melted into

A&T INDUSTRY TRADE CO.,LTD      [2017-05-24 10:22:47 ]

3mm 4mm 8mm Patterned glass for door window Furniture

PRODUCTION PROCESS Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, etc. as our material and then sent to furnace after accurate weighting, checking and mixing, with heavy oil as fuel. They are melted into

A&T INDUSTRY TRADE CO.,LTD      [2017-05-24 10:21:23 ]

4mm 8mm Dark green Reflective glass Curtain wall coated glss

PRODUCTION PROCESS It is produced by using CVD technology (chemical vapor deposition) that creates a perfectly uniform layer of metal oxide chemically bonded to the surface of the glass. As this hard chemical layer is fully bonded to the glass, the reflective glass can be cut, be

A&T INDUSTRY TRADE CO.,LTD      [2017-05-24 10:20:32 ]

4mm 5mm Dark grey Reflective float glass Coated glass Building glass

PRODUCTION PROCESS It is produced by using CVD technology (chemical vapor deposition) that creates a perfectly uniform layer of metal oxide chemically bonded to the surface of the glass. As this hard chemical layer is fully bonded to the glass, the reflective glass can be cut, be

A&T INDUSTRY TRADE CO.,LTD      [2017-05-24 10:19:41 ]

1.8mm 3mm Aluminum Mirror/Glass Mirror for bathromm decorative durniture dressing mirror

PRODUCTION PROCESS Aluminum Mirror sheet is produced through vacuum coating. Let the melt aluminum splash on the surface of clean quality float glass in the vacuum chamber, and then coated with two layers of protective paint. FEATURE 1. Made of waveless float glass(our float glas

A&T INDUSTRY TRADE CO.,LTD      [2017-05-24 10:17:48 ]

1.8-8mm Silver Mirror/Decorative bath dressing mirror

PRODUCTION PROCESS Made through a chemical sedimentation process. A specially treated silver sheet is coated on quality waveless float glass, followed by a sheet of copper, and then finished with two layers of paint for protection. FEATURE 1. Made of waveless float glass(our floa

A&T INDUSTRY TRADE CO.,LTD      [2017-05-24 10:16:38 ]

battery spring,battery contact

We are the manufacturer of Spring from China. Our spring products are mainly custom spring and common spring, such as Compression Spring, Extension Spring, Torsion Spring, Disc Spring, Wireforming Spring and other custom spring. We have earned a superior reputation for our skills

Xian Lianhu Spring Device Manufacturer      [2017-05-23 23:37:12 ]

I-pulse M6 SMT Nozzle Model P054 Nozzle

Description Model P054 Part Name Nozzle Used in Ipulse Machine supply All Ipulse Machine model Spare Parts, Original new inventory quantities,Original used and in stead of Spare Parts Thanks sale@jinchensmt com

Jinchen Electronic Technology Co,.Ltd      [2017-05-23 18:01:28 ]

frp manhole cover/ GRP Fiberglass SMC BMC Round Trench/Ditch/Gutter Cover

frp manhole cover/ GRP Fiberglass SMC BMC Round Trench/Ditch/Gutter Cover FRP tent pole 1.anti-corrosion; 2.light weight and high strength; 3.insulation,uv-resistance; 4.customization,economy. Advantage of fiberglass tent pole High Strength And Insulating Values High Corrosion Re

NLD INDUSTRIES INC.      [2017-05-23 17:07:58 ]

Stainless Steel Chain Link Fence

Stainless Steel Chain Link Fence for Airport, Highway or Railroad This is one part of stainless steel chain link fence, with many diamond openings adjacent to each other. Chain link fence with marine grade stainless steel for the highest level of perimeter protection. Stainless s

Walcoom Corporation      [2017-05-23 17:01:53 ]

Galvanized Chain Link Fence

All galvanized chain link fences at Walcoom are made from the woven and interlocking steel wire with premium quality. The hot-dipped galvanizing process ensures a fully protective zinc coating on all surfaces of the chain link, even the cut ends. There are two ways for chain link

Walcoom Corporation      [2017-05-23 17:01:00 ]

PVC Chain Link Fence

PVC Chain Link Fence Offers Secure Barrier & Aesthetic Look It shows one roll of dark green vinyl coated chain link fence, it has woven and interlocking steel wire with PVC coated. For coastal regions with high humidity, vinyl coated chain link fence is highly recommended for sec

Walcoom Corporation      [2017-05-23 17:00:17 ]