Please input queries on the search bar

NC DJI NAZA Flight Control Protective

1/5 HSP Car Parts This part can be used for CG94050, CG94051, CG94052, CG94053, CG94054. http://www sdshobby com/

SDSHOBBY TECHNOLOGY INDUSTRIAL LIMITED      [2015-06-24 17:10:32 ]

Mini Anemometer With Wind

Specification Wind Speed Measurement Range 0.3-30m/s Wind Temperature Measurement Range -10 Celsius degree-45 Celsius degree Temperature Measurement Error ±2 Celsius degree Speed Measurement Error ±5% http://www sdshobby com/

SDSHOBBY TECHNOLOGY INDUSTRIAL LIMITED      [2015-06-24 17:09:50 ]

Radio Tray For 1/5/1:5 HSP RC Car

Application This part is suitable for the following 1/5 HSP RC Cars RC Gasoline Car CG94050, CG94051, CG94052, CG94053, CG94054 http://www sdshobby com/

SDSHOBBY TECHNOLOGY INDUSTRIAL LIMITED      [2015-06-24 17:08:57 ]

G.T.Power Small Police Car

Specifications Input voltage 4.8-6.0V Working current 100mA 8 flashing modes Weight 20g http://www sdshobby com/

SDSHOBBY TECHNOLOGY INDUSTRIAL LIMITED      [2015-06-24 17:08:14 ]

NC DJI NAZA Flight Control Protective

Specifications Material Aluminum Alloy Color Black, Silver Dimensions 50*40*20mm Net Weight 18g http://www sdshobby com/

SDSHOBBY TECHNOLOGY INDUSTRIAL LIMITED      [2015-06-24 17:06:59 ]

Burst Flash LED Light Connecting

Product Description Recommended Other Relevant Products LED light control board Special 1W LED light Recommended Set for Multicopter For Quadcopter control board* 1 + connecting line* 4 + LED lights* 4 For Hexrcopter control board* 1 + connecting line* 6 + LED lights* 6 For Octoc

SDSHOBBY TECHNOLOGY INDUSTRIAL LIMITED      [2015-06-24 17:05:40 ]

XQ Power 17.5kg/56g Digital

XQ Power 17.5kg/56g Digital Robot Servo XQ-RS416 with Titanium Gear/Aluminum Case SKU XQ-RS416 http://www sdshobby com/

SDSHOBBY TECHNOLOGY INDUSTRIAL LIMITED      [2015-06-24 17:04:18 ]

Filters Bag Filters from clean-link

Specifications 1.Large dust holding capacity 2.High efficiency 3.Long working life 4.F5-F8 efficiency 5.Hot seller Features 1. Collect 1 to 5 micron particles. Between each pocket has a metal stick to make frame more firm, and the separation material of each pocket can avoid the

Guangzhou Clean-link Filtration Co.,ltd      [2015-06-24 17:04:00 ]

5M/roll 60 LEDs 3528 SMD

Specifications -Light Source LED -Working Voltage 12V -Color RGB -Consumption Power 4.8W/M -Useful Life 500000 Hours http://www sdshobby com/

SDSHOBBY TECHNOLOGY INDUSTRIAL LIMITED      [2015-06-24 17:03:07 ]

Towerpro Heavy Duty Analog Servo MG945

Specifications Stall Torque 12kg/cm at 4.8V No Load Running Speed 0.25sec/60degree at 4.8V Size (L*W*H) 40.7*19.7*42.9mm Weight 55g Bearing Qty. 2 Gear/ Case Type metal/ plastic Interface Type compatible with JR & Futaba interface http://www sdshobby com/

SDSHOBBY TECHNOLOGY INDUSTRIAL LIMITED      [2015-06-24 17:02:24 ]

Meter Super Bright No Waterproof

Features Size 5mm*5mm Working Voltage DC 12V Power 12W per meter Brightness 900LM per meter Maximum Current 5A per meter http://www sdshobby com/

SDSHOBBY TECHNOLOGY INDUSTRIAL LIMITED      [2015-06-24 17:01:07 ]

pre filter media

Speciality 1) Pre-filtration for the heavy polluted general draft apparatus and the air control system. 2) Anti-fractured PET organic synthetic fibre 3) Large dust holding capacity , small resistance , long service life and economical 4) Not contain silicon , chemical resisting a

Guangzhou Clean-link Filtration Co.,ltd      [2015-06-24 17:01:05 ]

G.T.Power L8 Model Car LED

Specifications 1. Input voltage 3.6V-8.4V 2. Max current rate 220mA 3. Included Red (Φ10mm) x2 White (Φ10mm) x2 Red (Φ6mm) x2 White (Φ6mm) x2 4. Suitable for all kinds of Model Car http://www sdshobby com/

SDSHOBBY TECHNOLOGY INDUSTRIAL LIMITED      [2015-06-24 16:58:57 ]

12V 5V BEC for FPV image transmission

Product Description: Ultra-lightweight and Micro BEC, special designed for multicopter. Output 5V 1.5A (Red); 12V 3A (Green) Input 2S-6S (Red); 4S-6S (Green) Weight 9g CNC with good heat dissipation and screening; users can paste it at any place of the aircraft with double-side

SDSHOBBY TECHNOLOGY INDUSTRIAL LIMITED      [2015-06-24 16:58:02 ]

Diffusion Intake Filter Panels from clean-link

EU5 ceiling filter media 1. It is made from the anti-break organic synthesis fiber in high-powered high melt way; 2.The wind surface of the mesh is specially compact, this structure make the filtering material keep the high filteringefficiency large dust holding capacity; even mo

Guangzhou Clean-link Filtration Co.,ltd      [2015-06-24 16:57:34 ]

Oval Voltage Switch With Large Current Power

Specifications Voltage Displaying Range 3.5-15V Maximum Current 15A Lead Wire Type silicon line, AWG24 Lead Wire Length 15cm Plug Type compatible Futuba/ JR Weight 40g http://www sdshobby com/

SDSHOBBY TECHNOLOGY INDUSTRIAL LIMITED      [2015-06-24 16:57:23 ]

6STARHOBBY Heavy Duty Metal Dual

The product has authorized by CE and ROHS test system. -Using 22AWG high torque twisted wire with strong anti-jamming capability, and receivers and other electronic devices can be prevented from interference signals. -Two Switches one for connecting and disconnecting the receiver

SDSHOBBY TECHNOLOGY INDUSTRIAL LIMITED      [2015-06-24 16:55:13 ]

12V 1.5W Aluminum Alloy LED Night

Specifications -LED 1.5W/2 Core -CNC Aluminum alloy processing -Work voltage DC12V -Work current 65mA+/-5mA -Dimension Dia.11mm*26mm -JST cable length 200mm -CRI >=75 -Lighting angle 180 degree -Lifetime 50000H -Net weight 4g http://www sdshobby com/

SDSHOBBY TECHNOLOGY INDUSTRIAL LIMITED      [2015-06-24 16:53:44 ]

Polyurethane Open Call filter foam material.

Specifications 1) Long operation life 2) Factory price 3) long service life 4) Good ventilation property 5) High adsorption Activated carbon filtration media Activated carbon filter is made of high-quality activated carbon powder combined with fiber basic, has a good adsorption p

Guangzhou Clean-link Filtration Co.,ltd      [2015-06-24 15:56:36 ]

APEX1325- crafts wood acrylic Laser cutting machine

Parameter All of these models can be customized according to customer requirements. NO. Description Parameter 1 X,Y,Z working area 1300*2 5 00mm(1600*2 600mm, 2000*3000*200mm) 2 Driving system Stepper motor or servo model 3 Laser power RECI Laser 60w, 80w, 100w, 130w 4 Laser type

APEX CNC Technology Co., Ltd.      [2015-06-24 15:46:15 ]