The fibers are placed in a loose tube made of high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. The tubes (and fillers) are stranded around the strength member into a compa
Qualfiber Technology Co.,Ltd [2019-01-11 01:41:45 ]
Bow-type FTTH put in side with 2 KFRP, the optical fiber unit positioned in the centre. Two parallel strength member are placed at the two sides and have aramid yarn to protect the inside FTTH, ourside s Cable construction details
Qualfiber Technology Co.,Ltd [2019-01-11 01:39:26 ]
FTTH Cable directly connected to their homes, their bandwidth, wavelength and transmission technology type are not restricted. The optical fiber unit id positioned in the center. Two parallel strength member are placed at the two sides. Cable construction details Items Descripti
Qualfiber Technology Co.,Ltd [2019-01-11 01:35:52 ]
FTTH Cable directly connected to their homes, their bandwidth, wavelength and transmission technology type are not restricted. The optical fiber unit id positioned in the centre. Two parallel strength member are placed at the two sides. Cable construction details Numberof fiber
Qualfiber Technology Co.,Ltd [2019-01-11 01:33:11 ]
The cable put in side with 2 FRP, the optical fiber unit positioned in the Loose tube. Two parallel strength member are placed at the two sides and have loose tube to protect the inside FTTH, outside sheath is HDPE. Cable construction details No of fiber 4F SM fiber Fiber type G6
Qualfiber Technology Co.,Ltd [2019-01-11 01:30:35 ]
Preformed Armor Rods Forming Machine 1. Suitable for processing the preformed strain clamp ,preformed suspension clamp and the preformed protection fittings (material the aluminum clad steel wire or galvanized steel wire) 2. Forming speed 0-1.5m/s , Diameter 1.67-5.2mm(the alumin
Hebei Glame Import and Export Trade Co.,Ltd. [2019-01-10 11:28:32 ]
Dead end grip for OPGW Component Inner armor rods, outer armor rods, thimble, U-shaped hanging loop, Extensioe Rods, bolt, nut, etc. Characteristic 1. Stress is distributed equally, without stress focus. It can protect optical cabl-es very well. 2. Under the condition of not exce
Hebei Glame Import and Export Trade Co.,Ltd. [2019-01-10 11:26:20 ]
Short Span dead end grip for ADSS(ADN) Component Single layer glue thread, thimble, extension loop, U-shaped hanging loop, bolt, nut etc. Characteristic Simple structures, easy installation, and to lower the costs of the project. Conditions For The Usage Optical cable projects wi
Hebei Glame Import and Export Trade Co.,Ltd. [2019-01-10 11:25:37 ]
Protection The preformed armor rods are used for protecting conductor from damages subjected to vibration, clamp stress, friction, electric arc & other external influence. The preformed armor rods & short preformed armor rods are of simple structure in which each set of armor rod
Hebei Glame Import and Export Trade Co.,Ltd. [2019-01-10 11:24:48 ]
Dead end grip for ACSR Component Thimble, Armor rods Characteristic 1. Stress is distributed equally, without stress focus. It can protect ACSR cables very well. 2. Under the condition of not exceeding the intensity of cable\'s side pressure, it has higher grip power for the cabl
Hebei Glame Import and Export Trade Co.,Ltd. [2019-01-10 11:23:17 ]
Function The armor rods can protect the optical cable by preventing the vibration damper aluminum clamp from nipping directly onto the OPGW cables to cause damages of the cable. Model Our company can provide all types of armor rods with length of 400 - 1 200mm according to users\
Hebei Glame Import and Export Trade Co.,Ltd. [2019-01-10 11:21:30 ]
Guy wire fittings Adjustable guy wire clamp Design This type of dead ends is a fast, simple safe method for retaining or securing cables such as staywires, groundwires etc. Standard products have an open helix loop but they can be supplied with a cabled loop to prevent slackening
Hebei Glame Import and Export Trade Co.,Ltd. [2019-01-10 11:20:47 ]
Ground Preformed Strain Clamp Insulated/bare cables 1.Thimble 2.Dead-ends Function Dead-ends are designed to hold insulated cables and bare homogeneous cables in transmission and distribution construction. Mechanical strength for these dead-ends are superior to that of homogeneou
Hebei Glame Import and Export Trade Co.,Ltd. [2019-01-10 11:20:02 ]
Component Inner armor rods, outer armor rods, rubber clamp piece, cover shell, right-angle hanging loop, U-shaped hanging loop, bolt, nut, gasket etc. Characteristic 1. Stress is distributed equally, without stress focus. It can improve the intensity of cable line installation po
Hebei Glame Import and Export Trade Co.,Ltd. [2019-01-10 11:19:13 ]
Dead end grip for AAAC,AAC Component Thimble,Amor rods Characteristic 1. Stress is distributed equally, without stress focus. It can protect AAAC/AAC cables very well. 2. Under the condition of not exceeding the intensity of cable\'s side pressure, it has higher grip power for th
Hebei Glame Import and Export Trade Co.,Ltd. [2019-01-10 11:18:26 ]
Short Span dead end grip for ADSS(ADN) Component Single layer glue thread, thimble, extension loop, U-shaped hanging loop, bolt, nut etc. Characteristic Simple structures, easy installation, and to lower the costs of the project. Conditions For The Usage Optical cable projects wi
Hebei Glame Import and Export Trade Co.,Ltd. [2019-01-10 11:17:38 ]
Guy wire fittings Adjustable guy wire clamp Design This type of dead ends is a fast, simple safe method for retaining or securing cables such as staywires, groundwires etc. Standard products have an open helix loop but they can be supplied with a cabled loop to prevent slackening
Hebei Glame Import and Export Trade Co.,Ltd. [2019-01-10 11:15:46 ]
Dead end grip for ACSR Component Thimble, Armor rods Characteristic 1. Stress is distributed equally, without stress focus. It can protect ACSR cables very well. 2. Under the condition of not exceeding the intensity of cable\'s side pressure, it has higher grip power for the cabl
Hebei Glame Import and Export Trade Co.,Ltd. [2019-01-10 11:14:57 ]
Dead end grip for ADSS(ANZ) Component Inner armor rods, outer armor rods, thimble, U-shaped hanging loop, extension loop, bolt, nut, etc. Characteristic 1. Stress is distributed equally, without stress focus. It can protect optical cables very well. 2. Under the condition of not
Hebei Glame Import and Export Trade Co.,Ltd. [2019-01-10 11:12:59 ]
Dead end grip for OPGW Component Inner armor rods, outer armor rods, thimble, U-shaped hanging loop, Extensioe Rods, bolt, nut, etc. Characteristic 1. Stress is distributed equally, without stress focus. It can protect optical cabl-es very well. 2. Under the condition of not exce
Hebei Glame Import and Export Trade Co.,Ltd. [2019-01-10 11:10:07 ]
