Specification 1. Input Characteristics Test (AC) • To measure the input voltage, current, power, power factor, power grid frequency • The fundamental frequency scope of the current and voltage 45Hz~65Hz; Narrowband range 45Hz~5kHz; Broadband range 45Hz~1MHz. • Voltage range
Lisun Instruments Limited [2019-11-12 17:39:43 ]
LVD-100KG/LVD-100KG-6D Electrodynamic Vibration Generator Test Table • LVD-100KG Vibration table combined vertical table and horizontal table in one set • LVD-100KG-6D Vibra Measurements Sine Wave, Frequency Modulation, Sweep Frequency, Programmable, Frequency Doubling, Logar
Lisun Instruments Limited [2019-11-12 17:36:12 ]
Model Work Room Size (mm) Exterior Size (mm) Voltage Power (KW) YWX/Q-150 600x450x400 1100x750x930 1Phase/220V 2 YWX/Q-250 900x600x500 1500x900x1150 1Phase/220V 2.5 YWX/Q-750 1100x750x500 1700x1050x1150 1Phase/220V 3.5 YWX/Q-010 1200x800x500 1800x1100x1200 1Phase/220V 3.5 YWX/Q-0
Lisun Instruments Limited [2019-11-12 17:33:34 ]
The Dustproof Test Chamber SC-015 is according to IEC60529, GB2423.37-89 (Test L dust test methods), GB 4208-93 protective casing grade (IP code), GB/T 4942.2-93(protective casing grade of low-voltage apparatus), GB 7000.1-1996, GB 7001-1986(protective casing grade of lamps), DIN
Lisun Instruments Limited [2019-11-12 17:30:57 ]
JL-X waterproof test machine is according to IEC60529, IEC60598, IEC60335 and IEC 60034-5 2000. The JL-X includes the following test grades IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 of IEC60529). It is widely used in the authentication test organization
Lisun Instruments Limited [2019-11-12 17:28:37 ]
High and Low Temperature Humidity Chamber is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2). It is used to test the CFL/LED which meets IES LM-80-08, electricity products, electronic components, material and so on. Specification •The chamber is produced by
Lisun Instruments Limited [2019-11-12 17:25:08 ]
EMI-9KC/EMI-9KB is an automatic EMI receiver system. It is a main test system for EMI (Electromagnetic Interference) radiation conduction testing. The EMI-9KC/EMI-9KB is produced by the full closure structure and strong electro-conductibility material, which has high shielding ef
Lisun Instruments Limited [2019-11-12 17:22:15 ]
Automatic lightning surge generator (Lightning surge immunity tester) SG61000-5 is used to assess the power cord and connect the internal switch stood in line to connect the internal switch to provide a common basis for switching the natural world and lightning caused by the high
Lisun Instruments Limited [2019-11-12 17:19:08 ]
The Portable CCD LED Colorimeter Spectroradiometer has the following versions which can measure different parameters • LMS-6000 illuminance (lux), E(Fc), Ee(W/m2), Tc (K), Duv Correlated Color Temperature (CCT), Chromaticity Coordinates, CRI, Purity, Peak Wavelength, Dominant W
Lisun Instruments Limited [2019-11-12 17:09:05 ]
LPCE-3 is a CCD Spectroradiometer Integrating Sphere Compact System for LED Testing. It is suitable for photometric and colorimetric measurement of luminaries such as LEDs, LED luminaires, Energy-saving lamps, Fluorescent lamps, HID lamps (high voltage sodium l System Configurati
Lisun Instruments Limited [2019-11-12 17:02:16 ]
LPCE-2 is an Integrating Sphere Spectroradiometer LED Testing System for single LEDs and LED lighting products light measurement. LED’s quality should be tested by checking its photometric, colorimetric and electrical parameters. According to CIE127-1997, IES LM-79-08 and IES L
Lisun Instruments Limited [2019-11-12 16:57:04 ]
LSG-1800BCCD Goniospectroradiometer is high precision automatic goniophotometric instrument for luminous intensity distribution measurements with facility for turning the light source. The LSG-1800BCCD can do the spatial CCT test when do the intensity distribution test. It is for
Lisun Instruments Limited [2019-11-12 16:53:52 ]
LSG-5000 Moving Detector Goniophotometer completely meets LM-79 Clause 9.3.1 and EN13032-1 clause 6.1.1.3 goniophotometer type 4 requirements. The LSG-5000 is an automatic light distribution intensity 3D curve testing system for measuring light. The m Measurement Luminous Intensi
Lisun Instruments Limited [2019-11-12 16:48:53 ]
Servo voltage stabilizer suppliers in India - People who are showing interest in buying latest servo voltage stabilizers for industrial and residential Gm Electricals is good choise. Try it once. thank you visit www gmelectricalsystems com
GM Electrical systems [2019-11-11 22:03:24 ]
1.Volmet China supplier Automatic pressure epoxy insulator hydraulic APG injection machine 2.Epoxy resin mixing device Application epoxy resin mixing device is applicable for mixing epoxy resin,hardener,and silica powder,to produce products such as transformer, bushing, post insu
PingXing Volmet company [2019-11-11 15:48:18 ]
APG Clamping Machines factory 1.high quality clamping mould 2.Supply APG moulds 3.Experienced engineers 4.Long life service Main Technical Parameters 1.Volmet China supplier Automatic pressure epoxy insulator hydraulic APG injection machine 2.APG machine Application APG machine i
PingXing Volmet company [2019-11-11 15:38:29 ]
factory 1.high quality clamping mould 2.Supply APG moulds 3.Experienced engineers 4.Long life service Heating plate size Clamping force Speed of clamping close Clamping open speed Distance between heating plates 800X600（mm） 250（KN） 3.1 (2.4)（m/min） 4.8(3.3)（m/min) 1
PingXing Volmet company [2019-11-11 15:22:49 ]
APG Clamping Machines factory 1.high quality clamping mould 2.Supply APG moulds 3.Experienced engineers 4.Long life service Main Technical Parameters 1.Volmet China supplier Automatic pressure epoxy insulator hydraulic APG injection machine 2.APG machine Application APG machine i
PingXing Volmet company [2019-11-11 14:54:29 ]
KingBest’s Standoff Insulator is widly used for electrical systems. We only produce the brass one. Material Brass, ABS We can provide a comprehensive one stop production process from mold design, production and surface treatment, such as CNC stamping, CNC machining, welding, po
Shenzhen KingBest Hardware Electronics Co.,Ltd [2019-11-09 09:52:38 ]
KingBest’s Standoff Insulator is widly used for electrical systems. We only produce the brass one. Material Brass, ABS We are professional manufacturer of Standoff insulator, Bus Bar, Battery Terminal Connector, and Battery Pack Housing for Lithium Battery, EV cars, or Energy S
Shenzhen KingBest Hardware Electronics Co.,Ltd [2019-11-09 09:51:00 ]
