16E1 to Ethernet Converter

Functions Baudcom’s 16E1/Ethernet converter realize Ethernet transparent transmission over 1~16E1 with maximum transmit rate of 31.68Mb/s. The converter adopts with international standard protocol (G.7041、G.7042、G.7043、G.8040) at all layers and able to intercommunicate wi

Shanghai Baudcom Communication Device Co.,Ltd      [2018-09-12 13:50:00 ]

8E1 to Optical Ethernet Converter

Functions 8E1 to optical ethernet (100Base-FX) converter use back multiplexing technology, transfer 10M/100M Ethernet data by using multi E1 channels. Realize convert between 1 to 8 E1 channels and Ethernet interface. It can transmit signal of E1 channel to RJ45 interface point t

Shanghai Baudcom Communication Device Co.,Ltd      [2018-09-12 13:49:06 ]

8E1 to 4Ethernet Converter with SNMP and console managment

Product function BD-8E1-4ETH converter uses reverse multiplexing technology to transmit 10/100BaseT data with bonding multi E1 channels, thus realizing conversion between 1-8 E1 channels and Ethernet interface. It can transmit signals point-to-point from E1 channel to RJ45 interf

Shanghai Baudcom Communication Device Co.,Ltd      [2018-09-12 13:48:18 ]

8E1 to Ethernet Converter

Overview The 8E1 to ethernet converter (also called ethernet over 8E1 converter ) uses reverse multiplexing technology to transmit 10/100BaseT data with bonding multi E1 channels,realizing conversion between 1-8 E1 channels and Ethernet interface. It can transmit signals point-to

Shanghai Baudcom Communication Device Co.,Ltd      [2018-09-12 13:47:34 ]

4E1 to Ethernet Converter

Product function 4E1 to 10/100BT ethernet converter used back multiplexing technology, transfer 10M/100M Ethernet data by using multi E1 channels. Realize convert between 1 to 4 E1 channels and Ethernet interface. It can transmit signal of E1 channel to RJ45 interface point to po

Shanghai Baudcom Communication Device Co.,Ltd      [2018-09-12 13:46:50 ]

E1 to 4*10/100BaseT Ethernet converter with Local management

channel provided by existing networks with low cost. 10/100Base-T(RJ45) interfaces are provided at the end of Ethernet LAN to accomplish various functions including MAC address self-learning, address filtering, address table maintenance and flow control. The E1/4*10/100BASE-TX co

Shanghai Baudcom Communication Device Co.,Ltd      [2018-09-12 13:45:54 ]

E1 to 4V35 Converter

E1-2/4V35 provides physical conversion between ITU-T G.703 standard E1 interface and 2/4 standard V.35 interfaces as well as one RS232 data channel. It can provide safe and seamless communication connection between equipments with different interfaces in the network. Random time

Shanghai Baudcom Communication Device Co.,Ltd      [2018-09-12 13:45:05 ]

10/100Base-T Ethernet to V.35 converter

Decription BD-ETH-V.35 provides conversion from V.35 to Ethernet, is a good performance, self-study long-distance Ethernet bridge. It is of small volume and low cost and is very suitable for connection application which needs low cost equipment. It can be also used as an extender

Shanghai Baudcom Communication Device Co.,Ltd      [2018-09-12 13:44:16 ]

G.703 E1 to RS232 converter

Features RS232 rate support 0~115200Kbps self-adapt; Support RS232 interface (TXD,RXD,GND) RS232 support hot-plug, connection to DTE or TCE device; offer 2 kinds of loop-return function, namely E1 self-looping at local end (ANA) and RS232 self-looping at local end (REM) AC220V an

Shanghai Baudcom Communication Device Co.,Ltd      [2018-09-12 13:43:15 ]

Framed E1 to V.35 converter

Overview The framed E1 to V35 converter provides conversion between ITU-T G.703 standard E1 interface and V.35 port The V.35 converter realize V.35 over E1 conversion and provides safely seamless connection of communication between different devices with different interfaces. It

Shanghai Baudcom Communication Device Co.,Ltd      [2018-09-12 13:42:16 ]

E1 to V.35 Protocol Converter

Overview E1 to V.35/V.24 (provides conversion between E1 and V.35/V.24 interface) Product introduction E1 to V.35/V.24 converter provides physical level conversion between ITU-T G.703 standard E1 interface and standard V.35 interface, it can receive synchronous 2.048 Mbps data fr

Shanghai Baudcom Communication Device Co.,Ltd      [2018-09-12 13:41:08 ]

Framed E1 to Ethernet Converter

GENERAL INFORMATION BD-FE1-ETH is a single port E1/ framed E1 with Ethernet Bridge that provides high-speed LAN-to-WAN connectivity. Plugging directly into the 10/100Base-T port of a hub or LAN switch, the Framed E1 to ethernet converter provides Framed E1 access at connection da

Shanghai Baudcom Communication Device Co.,Ltd      [2018-09-12 13:39:59 ]

G703 E1 to Ethernet converter | Ethernet over E1

Overview BD-E1-ETH is a single port G.703 E1 to Ethernet converter ( also called Ethernet over E1 TDM converter,G703 to ethernet converter) that provides high-speed LAN-to-WAN connectivity. Plugging directly into the 10/100Base-T port of a hub or LAN switch, the BD-E1-ETH provide

Shanghai Baudcom Communication Device Co.,Ltd      [2018-09-12 13:39:09 ]

SFP Fiber mode converter

Dual Fiber 850nm or 1310nm wavelength to Single Fiber 1310/1550nm wavelength Converter,kinds rates available 10/100/1000M,155M/622M/STM-1/STM-4 Power supply 1)input 100v~260VAC 2)input 36V-72VDC , output 3W DIMENSIONS Mini type G703 E1 to ethernet converter 210mm(W) × 140mm (L)

Shanghai Baudcom Communication Device Co.,Ltd      [2018-09-12 13:35:13 ]

10/100/1000M Multirate Fiber Mode converter

Features supporting single fiber by double directions transmission; Comply with any agreement between different rates. Fulfilling medium convert between single mode fiber and multi-mode fiber or extending fiber transmission distance, Supporting wavelength be 850nm,1310nm or 1550n

Shanghai Baudcom Communication Device Co.,Ltd      [2018-09-12 13:33:13 ]

converters Multi-services unified platform

Overview 16-slot multi-service management system is a Ethernet and SDH transmission equipment with high price/performance ratio, and it can support 10/100M Ethernet fiber media converter, 10/100/1000M Ethernet fiber media converter, 1 fiber + 2 RJ45 Ethernet fiber media converter

Shanghai Baudcom Communication Device Co.,Ltd      [2018-09-12 11:57:02 ]

10G Ethernet Fiber Media Converter

Description Baudcom provides 10Gbps Ethernet media converter between SFP+ to UTP,and XFP to UTP No matter what kind of media applied for 10Gbps Ethernet,it used to be the fiber as the media for transmission.10G Ethernet standalone and module cards, brings you the best and simple

Shanghai Baudcom Communication Device Co.,Ltd      [2018-09-12 11:54:49 ]

G703 E1 to Ethernet converter | Ethernet over E1

Overview BD-E1-ETH is a single port G.703 E1 to Ethernet converter ( also called Ethernet over E1 TDM converter,G703 to ethernet converter) that provides high-speed LAN-to-WAN connectivity. Plugging directly into the 10/100Base-T port of a hub or LAN switch, the BD-E1-ETH provide

Shanghai Baudcom Communication Device Co.,Ltd      [2018-09-12 11:37:43 ]

Dual Fiber to Single Fiber Converter

Features supporting dual fiber to single fiber double directions transmission; Comply with any agreement between different rates. Fulfilling medium convert between single mode fiber and multi-mode fiber or extending fiber transmission distance, Supporting wavelength be 850nm,1310

Shanghai Baudcom Communication Device Co.,Ltd      [2018-09-12 11:35:23 ]

SFP Fiber mode converter

Functions The single mode to multimode SFP fiber mode converter is the ability to convert any signaling rate, from 155Mbps to 1.25Gbps, being an Universal Fiber Converter - ideal for any communication standard like Fast and Giga Ethernet, STM-1 and STM-4, OC-1, OC-3, OC-12 and OC

Shanghai Baudcom Communication Device Co.,Ltd      [2018-09-12 11:34:11 ]