SUNWELL spiral wound gasket is formed of V-shaped Metallic strip and soft non-metallic filler. Support rings, inside and Outside the spiral, improve the gasket's handing, fitting and Versatility Depend on its excellent compression resilience, it is suitable for sealing spots wher
NINGBO SUNWELL SEALING MATERIALS CO.,LTD. [2014-11-13 20:51:53 ]
Flexible graphite packing can be used to seal hot water, high temperature and pressure steam, Leat transfer fluid, hydrogen gas, ammonia, organic solvents, hydrocarbons, cryogenic Liquids, etc., except fewer strong oxidizer. SUNWELL P400 Flexible Graphite Packing braided from low
NINGBO SUNWELL SEALING MATERIALS CO.,LTD. [2014-11-13 20:50:24 ]
Graphite PTFE Filament Packing PTFE Graphite Filament Yarn is made by special technique,impregnated with PTFE dispersion and graphite powder to increase density and sealing efficiency. Braided by high strength PTFE filament LENMENS yarn with graphite impregnation. The characteris
NINGBO SUNWELL SEALING MATERIALS CO.,LTD. [2014-11-13 20:37:19 ]
The style RX is an adaptation of the standard style R which energizes on assembly. The RX is designed to fit the same groove design as a standard style R, making the joints interchangeable. Consideration should be given to the difference in finished make-up distance. The modified
NINGBO SUNWELL SEALING MATERIALS CO.,LTD. [2014-11-13 20:33:08 ]
PTFE Envelope Gasket with core material of flexible materials (Asbestos; non-asbestos; rubber, etc.), which is wrapped by PTFE. Product Feature Styles Of PTFE Envelope SUNWELL 1320Y This is one of the most frequently used and economic types. It applies to use in every kind of oc
NINGBO SUNWELL SEALING MATERIALS CO.,LTD. [2014-11-13 20:21:15 ]
Formed of V-shaped 316L strip and soft PTFE filler. The Material of Outside ring and inside ring is 316L It can be bear the most bitter chemical medium, and has good anti-creeping performance In the low temperature environment,it has good sealing effect. Product Feature 1.Chemic
NINGBO SUNWELL SEALING MATERIALS CO.,LTD. [2014-11-13 20:17:38 ]
non-asbestos gasket made by sheets of TESNIT,KLINGER, High pressure paronite, middle pressureparonite, low pressure paronite, oil-proof paronite using cutting machine and some process to make it flat non asbestos gasket. Product Feature 1.cheap,easy use, good fuction enduring ch
NINGBO SUNWELL SEALING MATERIALS CO.,LTD. [2014-11-13 20:16:27 ]
SUNWELL SW620 Spiral wound gasket for heat exchangers can be with or without inner and outer rings This style spiral wound gasket is for heat exchangers where pass bars are required. The outer portion is of standard spiral wound construction. The rib portion is normally of single
NINGBO SUNWELL SEALING MATERIALS CO.,LTD. [2014-11-13 20:08:53 ]
Asme B16.20 Spiral Wound Gaskets Products are manufactured in accordance with all relevant gasket standards. All types of Spiral wound gaskets can be manufactured, CG, CGI, R, RIR, etc. Our production capacity is 150, 000 PCS per month. Material combinations for all operating con
NINGBO SUNWELL SEALING MATERIALS CO.,LTD. [2014-11-13 20:01:21 ]
The type BX energized ring type joints, manufactured in accordance with API 6A, are designed for use on pressurized systems up to 20,000 psi. When correctly fitted, the type BX gasket allows virtual face to face contact of the flange faces which means that the gasket in fully tra
NINGBO SUNWELL SEALING MATERIALS CO.,LTD. [2014-11-13 19:55:42 ]
SUNWELL's Ring Joint Gaskets are precision machined,metallic sealing ring suitable for high pressure and high temperature applications. RTJ gaskets are designed to seal by initial line contact or welding action between the mating flange and the gasket. By applying pressure on the
NINGBO SUNWELL SEALING MATERIALS CO.,LTD. [2014-11-13 19:53:59 ]
Oval Ring Joint Gasket suits for high pressure and temperature applications found in the petroleum industry and is primarily used in the oil field on drilling and completion equipments. Since ISO9001 Quality management has been implemented,our level of inspection means and techno
NINGBO SUNWELL SEALING MATERIALS CO.,LTD. [2014-11-13 19:48:03 ]
SUNWELL not only provide the complete kammprofile gasket, also metal core only. The range of styles including with and without rings, with integral and loose outer rings. Kammprofile Gasket is known as LP1 Gaskets and Cammprofile. Product Feature > Low sealing stress required fo
NINGBO SUNWELL SEALING MATERIALS CO.,LTD. [2014-11-13 02:14:24 ]
P ortable mini cranes, M otor crane HP550 ATV/UTV E lectric M ini C rane with 12 V DC Product Introduction Application China coal special produce vehicle-mounted electric crane ,with DC12V Vehicle power as power .Specially suitable in outdoor on power place , it is widely used ,
山东中煤集团 [2014-11-09 20:20:45 ]
P ickup truck crane , S mall crane for truck 500KGS Electric Truck Hoist Winch Product Introduction Electric Truck Hoist Winch is an economical alternative to costly truck mounted hydraulic cranes. It is suitable for mounting on utilities, light trucks, trailers or pontoons, etc.
山东中煤集团 [2014-11-09 20:19:19 ]
Country Kuwait telephone E-mail 00965-90936937 Hani jamal@eclipseq8.net Color Green Feature Track Crane Max. Lifting Load 20 Rated Loading Capacity 20 TON Model Number Nk200v2 Brand Name KATO Place of Origin Model year Japan 1994
Eclipse Gen.Trad.& Cont.Est. [2014-11-02 10:25:55 ]
AUTO SENSOR HAND STERILIZER KT-8000 The machine adopts high pressure pump and spray nozzle, completely spray atomization, spraying evenly, the sterilization effect is more ideal; Using infrared sensing technology, contactless hand disinfection, chip control, more stable for using
上海康特环保科技发展有限公司 [2014-10-28 03:12:03 ]
Specifications Design ASME B16.34. Face to Face ASME B16.10. End to End ASME B16.10. End Flange ASME B16.5. Test API 598. Pressure Class 150LB-600LB. Size Range 2"-12". Material Available WCB, WCC, LCB, LCC, WC6, WC9, C5.
Zhejiang Onero Valve Co., Ltd. [2014-10-24 20:16:54 ]
Features Side Entry/Top Entry. Two/Three pieces Design. Full & Reduced Bore. Anti-stactic Device. Blow-out Proof Stem. Fire Safe Design. Specifications Design ASME B16.34/BS 5351/API 6D. Face to Face ASME B16.10. End to End ASME B16.10. End Flange ASME B16.5. BW End ASME B16.25.
Zhejiang Onero Valve Co., Ltd. [2014-10-24 20:15:53 ]
Features Side Entry / Top Entry Two-pieces Design Full & Reduced Bore Anti-stactic Device Blow-out Proof Stem Fire Safe Design Specifications Design ASME B16.34/BS 5351/API 6D. Face to Face ASME B16.10. End to End ASME B16.10. End Flange ASME B16.5. BW End ASME B16.25. Test API 5
Zhejiang Onero Valve Co., Ltd. [2014-10-24 20:12:48 ]
