Pipe supporting system General Specifications " Electro galvanized split type clamp system. " Bolt and nut system for tightening / Direct tapping. " Connecting with dual tapped boss M8 / M10 " Lining with noise reducing rubber strip (or) without lining depending on the requireme
SY-1216 SY-1418 SY-1620 SY-2025 SY-2632 Used pressing to install corresponding F5 press fitting.
EJ-401A 40x30x50mm, Mass 1.0kg EARTH-CHAIN V-Blocks with ClampDimensions EJ-401A 40x30x50mm, Mass 1.0kgEJ-402A 50x40x50mm, Mass 1.5kgEJ-403A 60x50x70mm, Mass 2.3kg
offer high density that endows the product with both high precision and superior vibration absorbency Cold Stamping has been able to eliminate the drawbacks inherent with traditional methods of die casting. This is a fine example where, unlike die cast products those made by cold
Material Cold rolled steel (Thk and width varies from each size) Features Medium/Large load bearing capacity. Modified variety (for vertical risers) with base bracket and grouting/fastening arrangement. Available with or without rubber beading. Holds pipe in position without allo
304 Stainless Steel Hose Clip 304 Stainless Steel Hose ClipORBIT Stainless Steel Hose Clips and screw are made entirely from 18/8 Stainless Steel, which contain 18% chromium and 8% nickel. ORBIT Stainless Steel Hose Clips are ideal for salt water and many other highly corrosive e
Material Steel body with Zinc nut Weight 70 Kg Material Steel body with Zinc nut Weight 70 Kg Dimension 105 x 75 x 8 mm Application User for assembling kitchen racks
Product Name Automatic Tow Clamp Product Name Automatic Tow ClampSpecifications Item No. Standard Dimensions (m/m) N W. Pack A B C D E F G L kg Pcs H-17-1 Medium 50 155 14.5 12.5 87 111 76 160 4.8 6 Relative Product
are widely used in slimfitting transformer, available in horizontal form. We offer powder coated clamps that are widely used in slimfitting transformer, available in horizontal form Material Fresh CRC SheetsSizes No.45 Core SizesMounting HorizontalThickness From lmm To 1.2mmCoati
These Drum lifters are specially designed to lift the Drums / Barrels. These Drum lifters are specially designed to lift the Drums / Barrels. A Mater Ring is provided on the top, which easily fits into the Crane's HookAt bottom two spring loaded Drum Hooks are provided which easi
size A B 1" 25.4 24 1.5" 38.1 28 2" 50.8 28 size A B C 1" RD-52-1/6 25.4 25 1.5" RD-65-1/6 38.1 30 2" RD-78-1/6 50.8 30 2.5" RD-95-1/6 63.5 37 3" RD-110-1/4 76.3 42 4" RD-130-1/4 101.6 45 size A B D 1" RD-52-1/6 25.6 25 1.5" RD-65-1/6 38.3 30 2" RD-78-1/6 51 30 2.5" RD-95-1/6 63.
vee blocks Manufactured from selected steel, Vee Blocks are fully hardened and ground Following enhanced features incorporated in the design render greater versatility to this Vee Block set Capable of being used on base, on end and flat on either sides as the clamp is within the
Single Ring The theory of LOKRING tube connection technology according to known and proven physical rules of material nature and to technical experience. Connection is made by following below three steps.
Rail Clamp is compatible with the Universal Mount and FOTON Target. I Rail Clamp is compatible with the Universal Mount and FOTON Target. Is used for accurate rail alignment during the Railway construction.