AATCC Wrinkle Recovery Tester is used to determine a fabric's ability to recover after wrinkling under a predetermined load for a set period of time.
Shanghai Qianshi Precision Electromechanical Techn [2025-01-10 10:45:01 ]
With the equipment the impact resistance of plastic sew-through flange buttons can be determined that a falling mass of 0.84kg (29.5oz) is released from a height of 67mm (2.625inch) or other heights as required. Cracking, chipping or breakage constitute failure.
Shanghai Qianshi Precision Electromechanical Techn [2025-01-10 10:43:33 ]
Measures the relative burning rate and flame retardant of textile, especially the automotive trim.
Shanghai Qianshi Precision Electromechanical Techn [2025-01-10 10:42:46 ]
The stainless steel nut is heated to a temperature of 900°C in a muffle furnace. The specimen is placed inside the test chamber and the clamping rig is placed onto the sample using crucible tongs supplied. The heated nut is placed in the centre of the clamping rig. After 30 seco
Shanghai Qianshi Precision Electromechanical Techn [2025-01-10 10:41:46 ]
The electric yarn twist tester can be used to determine yarn twist in single yarn or ply yarns, it is a kind of fan arm twist tester, type with auto stop & reverse for conventional or untwist/re-twist methods. Test length adjustable up to 50cm/20 inches for S & Z twist yarns. The
Shanghai Qianshi Precision Electromechanical Techn [2025-01-10 10:39:26 ]
Product information •Widely used in the evaluation of the appearance retention of carpets •Can test with underlay underneath the carpet •Provides a rapid method of test - completion within one working day
Shanghai Qianshi Precision Electromechanical Techn [2025-01-10 10:38:43 ]
The Digital Thickness Gauge is available with specific nonwoven standard test kits. Nonwovens Include presser foot and reference plate. Geotextiles Include presser foot, reference plate, guard ring and set of weights to produce pressures of 2, 20, and 200kPa. Accessory kits are a
Shanghai Qianshi Precision Electromechanical Techn [2025-01-10 10:30:00 ]
1. Utilises a standard lighting and viewing area by rating the appearance of samples compared to appropriate reference standards. 2. Uses either 2400mm (8ft) or 1200 (4ft) Cool White lamps (as per section 12.4 of certain AATCC test methods). 3. Can be either wall mounted or used
Shanghai Qianshi Precision Electromechanical Techn [2025-01-10 10:27:22 ]
1. Sample holder：Length 150mm × 75mm wide 2. Frame marking line under the sample ignition point of 75mm 3. Ignition time 0 ~ 99.99 seconds set arbitrarily 4. Flame height measuring device Flame height：40±2mm 5. distance between Ignition and specimen holder 15mm 6. The use
Shanghai Qianshi Precision Electromechanical Techn [2025-01-10 10:25:57 ]
The Precision Fiber Microtome/fiber slicer is used to cut fibers or yarns into very small cross-sectional slices for microscopic observation of their tissue structure for further inspection or research.
Shanghai Qianshi Precision Electromechanical Techn [2025-01-10 10:23:11 ]
Gellowen has developed its filter media testing system of G505 for the determination of particle concentration, dust penetration, cycle time, pressure drop, residual pressure drop, fractional efficiency, gravimetric separation efficiency. G505 allows testing of specific filter me
Shanghai Qianshi Precision Electromechanical Techn [2025-01-10 10:21:17 ]
Seat flammability tester GELLOWEN V-211 has been designed and engineered to conform to the below standards. The device use for assessment of the ignitability of upholstered seating by simulating cigarette and match as flame ignition source.
Shanghai Qianshi Precision Electromechanical Techn [2025-01-10 10:19:07 ]
1.Sample holder inner diameter of 118 mm stainless steel ring, inside diameter of 0.70 mm and a mesh diameter is 2.10mm into the stainless steel mesh .Sample installation height can be adjusted 2.Sample size 70 x 70 (mm), the thickness is not more than 13mm 3.Residue container in
Shanghai Qianshi Precision Electromechanical Techn [2025-01-10 10:12:45 ]
Model 238D Stations 6 Rub heads Curved surface R45mm, width 20mm Rub heads load 2N Rub area length 100mm Reciprocal speed 30rpm Load weight 300g,500g,800g Rub cloth fixing method Spring clip Counter 220V, 50Hz
Shanghai Qianshi Precision Electromechanical Techn [2025-01-09 15:53:35 ]
PFE Tester can be used to detect the filtration efficiency and resistance of particles such as masks and filter materials in medical device inspection center, safety protection inspection center, drug inspection center, disease prevention and control center, textile inspection ce
Standard International Group (HK) Limited [2025-01-08 15:23:22 ]
Medical face mask differential pressure tester also called mask breathility tester is to determine the breathability of medical face mask materials. The tester can measure the differential pressure (Delta P) required to draw air through a measured surface area at a constant air f
Standard International Group (HK) Limited [2025-01-08 15:22:30 ]
Application Fabric spray rating tester to determine the resistance of any fabrics, which may or may not have been given a water-repellent finish, to surface wetting by water. It is not intended to predict waterproofness, since it does not measure the penetration of water through
Standard International Group (HK) Limited [2025-01-08 15:21:35 ]
Application This Masks Universal Tensile Strength Tester is designed for conduct tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for rubber, plastic, leather, metal, nylon line,yarn,fabric,paper,aviation, package, construction, petrifac
Standard International Group (HK) Limited [2025-01-08 15:20:39 ]
The Oxygen Index is, perhaps, the most economical and precise quality control test of combustible materials. Its ease of use together with high levels of precision has made this technique a primary characterising and quality control tool to the plastic and electric cable industri
Standard International Group (HK) Limited [2025-01-08 15:18:53 ]
The Vertical Flammability Chamber, designed for American Standards, measures the vertical flame spread for children's sleepwear, fabrics, other textile materials or resilient filling materials used in upholstered furniture. Application The vertical burning of textiles is suitable
Standard International Group (HK) Limited [2025-01-08 15:17:46 ]
