SDMF300 Muffle Furnace can be used to determine ash and volatile content in coal, coke and other solid biomass fuels etc.1.Multi testing mode available, slow ash, quick ash 1, quick ash 2, volatile matter, adhesion, Roga and Universal Test; Universal 1 test can set 6 temperature
Hunan Sundy Science and Technology CO.,LTD [2018-04-17 11:52:04 ]
SDIMF200 ash & volatile matter tester can be used to determine ash and volatile content in coal, coke and other solid biomass fuels etc.1.Intelligent design, testing process is controllable ①Equipped with electronic lock, which can’t be opened during the testing process. ②A
Hunan Sundy Science and Technology CO.,LTD [2018-04-17 11:51:18 ]
SDTGA520 can be used to determine the moisture content in coal, coke and other solid biomass fuel;One batch 20 samples Blast heating way and light wave heating way are available. Sundy , founded in 1993,is the leading supplier of coal analysis total solutions in China With 24 yea
Hunan Sundy Science and Technology CO.,LTD [2018-04-17 11:50:34 ]
SDTGA5000a can be used to determine the moisture, ash and volatile matter as well as calculation of fixed carbon and calorific value in coal, coke, calcined petrol coke and other solid biomass fuel etc.16 samples for moisture & ash, 10 samples for volatile matterFurnace temperatu
Hunan Sundy Science and Technology CO.,LTD [2018-04-17 11:49:36 ]
SDTGA8000 can be used to determine the moisture, ash and volatile matter as well as calculation of fixed carbon and calorific value in coal, coke, calcined petrol coke and other solid biomass fuel etc The only proximate analyzer which can test batches of sample without waiting fo
Hunan Sundy Science and Technology CO.,LTD [2018-04-17 11:48:54 ]
SDTGA6000 can be used to determine the moisture, ash and volatile matter as well as calculation of fixed carbon and calorific value in coal, coke, calcined petrol coke and other solid biomass fuel etc.19 samples+1 blank sample for moisture & ash; 26 samples+1 blank sample for vol
Hunan Sundy Science and Technology CO.,LTD [2018-04-17 11:48:03 ]
SDFCl1000 is applied to determine the fluorine and chlorine content in coal or other combustible material Available to calibrate when decomposing the parameters first batch of samples and not calculated to total analysis time. Not necessary to calibrate each day, calibration be p
Hunan Sundy Science and Technology CO.,LTD [2018-04-17 11:47:24 ]
SDS-IVa can be used to determine the total sulfur content in combustibles such as coal, coke, petroleum and other solid biomass fuels in the field of power plant, coal mining, cement & steel factory etc Test reliable, cost-effective.
Hunan Sundy Science and Technology CO.,LTD [2018-04-17 11:46:39 ]
SDS720 can be used to determine the total sulfur content in combustibles such as coal, coke, petroleum and other solid biomass fuels in the field of power plant, coal mining, cement & steel factory etc.21 samples loaded once, high test efficiency With digital flow meter, hygromet
Hunan Sundy Science and Technology CO.,LTD [2018-04-17 11:44:48 ]
Strictly manufactured according to IEC61032.It is made of 304 stainless steel. IPX5 is a 6.3mm diameter hole and IPX6 is a 12.5mm diameter hole His accuracy is 0.1mm, with leakage protection, water shortage, short circuit protection.
Shenzhen Chuangxin Instrument Co., Ltd. [2018-04-16 16:49:40 ]
Image Introduction Single Burning Items(SBI), as European\'s the evaluation of fire-resistance performance of building materials ,measures heat release rate (H R.R), smoke growth rate index (SPR), oxygen consumption, CO, CO2 production, mass loss rate and so on. International sta
chongqing gold co ltd [2018-03-27 15:58:17 ]
Image Introduction Smoke Density Tester is the testing equipment measuring the smoke generated when the cable or optical cable is placed horizontally and burn under definite fire resource in the specified condition (3m3 chamber required by IEC61034). This equipment is important t
chongqing gold co ltd [2018-03-27 15:55:04 ]
Image Introduction Cone Calorimeter measures heat release rate(H R.R), smoke release, ignition time, oxygen consumption, carbon monoxide and carbon dioxide generation and mass loss rate when specimen is exposed to resource of conical heater. International standards 1. GBT16172 2.
chongqing gold co ltd [2018-03-27 15:47:02 ]
Image Introduction Single wire and cable vertical burning tester is themost widely used and low cost of cable fire performance test equipment single wire or cable burning tester meet the national standard GB /T18380.11-2008 / IEC60332-1-1 2004 requiremen. It is to test cable , fl
chongqing gold co ltd [2018-03-27 15:43:33 ]
Image Introduction cable horizontal and vertical burning test apparatus(VW-1)is designed according to UL1581 sect 1080.1~1080.14, and meet the criteria of VW-1(Vertical-specimen) Flame Test. It can be used to test of 1060 products wire and cable FT1 and vertical burning test,1080
chongqing gold co ltd [2018-03-27 15:37:43 ]
Image Introduction car inner decorations combustion test is designed and manufactured according to ISO3795 standards and relevant clauses. Apply to identify vehicles (cars, multipurpose passenger car, truck and bus) interior material horizontal burning test. A high degree of auto
chongqing gold co ltd [2018-03-27 15:30:42 ]
Image Introduction Full Face Masks Flame Resistance Tester is mainly composed of jacket and bib composition, may also wear fire protective helmets, fire protective boots and fire-protective gloves! Each set must be fitted a serial number of check marks with strong national fire e
chongqing gold co ltd [2018-03-27 15:25:18 ]
Image Introduction Textiles 45 ° Damaged Area Experimental Device is designed according to the latest edition of the national standard GB/T14645 design and manufacturing; applies to textile fabric in under 45 ° combustion, determination of the damaged area and damage length det
chongqing gold co ltd [2018-03-27 15:23:09 ]
I Image Introduction Cable corrosion test apparatus is used to test the acidity of the gas that released during combustion from cable or optical cable components material; The equipment is designed and produced on the basis of GB/T 17650 and IEC 60754.The cable material is proces
chongqing gold co ltd [2018-03-27 15:18:32 ]
Image Introduction In a fire, people are often smoke suffocated or unable to escape because of the invisible road, so in the prevention of fires, smoke density of the test material is essential. building materials smoke density Tester conforms to the national standard GB/t 8627-2
chongqing gold co ltd [2018-03-27 15:15:48 ]