Image Introduction Smoke Box (Smoke Density Chamber) measures optical density of smoke generated from test sample when test sample of certain thickness is exposed to heat source(2.5W/cm2, 25kw/m2 using by E 662 furnace) or fire in a chamber. This equipment is satisfied with stand
chongqing gold co ltd [2018-03-27 15:13:27 ]
Image Introduction UL 94 measures the combustion properties (after flame, after glow) by burner (H-5025 UL tirrill burner) when test sample combusts in chamber\'s internal volume of 0.864 and is installed internal light to observe the specimen\'s properties and has ventilating op
chongqing gold co ltd [2018-03-27 14:56:53 ]
Image Introduction thermal protection (radiation) performance testing in accordance with ISO6942 and EN366 standards of design and manufacturing. This tester fully compliant to test requirements and received US and European customers\' acception; The device has a user-friendly, i
chongqing gold co ltd [2018-03-27 14:54:14 ]
Image Introduction Cone Calorimeter measures heat release rate(H R.R), smoke release, ignition time, oxygen consumption, carbon monoxide and carbon dioxide generation and mass loss rate when specimen is exposed to resource of conical heater. International standards 1. GBT16172 2.
chongqing gold co ltd [2018-03-27 14:51:06 ]
Image Introduction IMO spread flame apparatus is used to evaluate combustion characteristics of building materials and ship materials and measures spread rate of flame, flame for ignition by distances, CFE (Critical Flux at Extinguishment) and total heat release. This test method
chongqing gold co ltd [2018-03-27 14:48:55 ]
Image Introduction LOI(Limited Oxygen Index tester) measures minimum oxygen concentration as necessary when specimen combustion. This equipment\'s the oxygen analyser is adapted Paramagnetic Type which has a precise, long life, less error rate and high reliability. TOI (Temperatu
chongqing gold co ltd [2018-03-27 14:46:32 ]
Image Introduction Critical Radiant Flux of the main parameters of flooring materials evaluate the fire risk, and it characterizes the flooring material samples subjected to conditions at the thermal radiation from outside flame. According ISO9239-1,2 requirements, and flooring h
chongqing gold co ltd [2018-03-27 14:42:15 ]
Image Introduction This heat transmission tester for fire protection clothing is designed according to ISO12127-2007 and EN702. The instrument uses the heating cylinder to provide a constant temperature in contact with the sample under certain load and a calorimeter to measure th
chongqing gold co ltd [2018-03-27 14:37:54 ]
Introduction this instrument is designed according to ISO11925-2, it is used to test building material under conditions in the absence of external radiation to direct impact of vertically placed samples with a small flame to determine the flammability of building products. Intern
chongqing gold co ltd [2018-03-27 14:27:31 ]
Does your yard bare unsightly ugly roots, tree stump reamins and more? Well call Stump Removal Cleveland for all of your tree stump removal needs. We are experts in getting rid of those unwanted ugly tree stumps. We can help you get your yard back in shape. Call us today for your
Stump Removal Cleveland [2018-03-26 00:54:33 ]
Battery 3.0V*1(button cell) Size 16.2*3.0*1.6(cm) Instructions 1. Remove the protective cap Press ON/OFF button. 2. Immerse the meter into the water/solution height no more than 4cm(From the beginning of TDS meter). 3. Waiting until the display stabilizes,the TDS Meter automatica
Zhengzhouyuelong Electronics [2018-03-24 15:16:57 ]
Introduction LOI(Limited Oxygen Index tester) measures minimum oxygen concentration as necessary when specimen combustion. This equipment\'s the oxygen analyser is adapted Paramagnetic Type which has a precise, long life, less error rate and high reliability. TOI (Temperature Oxy
chongqing gold co ltd [2018-02-12 13:54:28 ]
Introduction combustion of materials is important characterize parameters to calculated building materials release heat and fire basic data. The tester is one of the devices is designed according to ISO1716-2002 International standards 1. GBT1440 2. ISO1716-2002 Features 1, The a
chongqing gold co ltd [2018-02-12 13:40:38 ]
Introduction this instrument is designed according to ISO11925-2, it is used to test building material under conditions in the absence of external radiation to direct impact of vertically placed samples with a small flame to determine the flammability of building products. Intern
chongqing gold co ltd [2018-02-12 13:35:34 ]
Introduction Single wire and cable vertical burning tester is themost widely used and low cost of cable fire performance test equipment; single wire or cable burning tester meet the national standard GB /T18380.11-2008 / IEC60332-1-1 2004 requiremen. It is to test cable , flamere
chongqing gold co ltd [2018-02-12 11:58:24 ]
Introduction UL 94 measures the combustion properties (after flame, after glow) by burner (H-5025 UL tirrill burner) when test sample combusts in chamber\'s internal volume of 0.864 and is installed internal light to observe the specimen\'s properties and has ventilating opening
chongqing gold co ltd [2018-02-12 11:50:29 ]
Introduction Non-Combustibility Tester measures incombustibility and combustibility of uniform building material and non-uniform building material of actual element International standards 1. GBT5464 2. ISO1182 3. ASTM E136 4. KS F ISO 1182 Features • Single Zone Furnace operab
chongqing gold co ltd [2018-02-12 11:41:24 ]
Introduction Cable corrosion test apparatus is used to test the acidity of the gas that released during combustion from cable or optical cable components material; The equipment is designed and produced on the basis of GB/T 17650 and IEC 60754.The cable material is processed by p
chongqing gold co ltd [2018-02-12 11:36:11 ]
Introduction In a fire, people are often smoke suffocated or unable to escape because of the invisible road, so in the prevention of fires, smoke density of the test material is essential. building materials smoke density Tester conforms to the national standard GB/t 8627-2007 sp
chongqing gold co ltd [2018-02-12 11:25:57 ]
Introduction This heat transmission tester for fire protection clothing is designed according to ISO12127-2007 and EN702. The instrument uses the heating cylinder to provide a constant temperature in contact with the sample under certain load and a calorimeter to measure the heat
chongqing gold co ltd [2018-02-12 11:09:38 ]
