Special Seal Bonded Seal ...
Tsuang Mei Oil Seal Factory Co., Ltd. [Mechanical Parts & Fabrication Services] [Seals]
WPR-369 *After sealed no swivel on the pin ...
Wirop Industrial Co., Ltd. [Mechanical Parts & Fabrication Services] [Seals]
Material:PVC Magnetic Seal, Glass to Glass at 135o Available for glass thickness 6mm, (1/4"), 8mm (5/16") , 10mm (3/8") and 12mm (1/2 ...
Northern Hardware & Glass. [Mechanical Parts & Fabrication Services] [Seals]
5. IGNITION LOSS IS:2712/1998 % <28 4. RECOVERY IS:2712/1998 % >40 3. COMPRESSIBILITY IS:2712/1998 % 6 14 2. TENSILE STRENGTH IS:2712/1998 Mpa >24 1. DENSITY IS:2712/1998 g /cm3 1.80 - 2.10 The following Information Applies to material Thickness 1.5mm. 0.80 mm to 6.00 mm. ...
Ferolite Jointings Limited [Mechanical Parts & Fabrication Services] [Seals]
Padlock Seals with Tail Polypropylene padlock seal with strap made of the same material. Resistant against atmospheric, chemical agents and sunlight exposure. ...
EMBAIRES [Mechanical Parts & Fabrication Services] [Seals]
Applications: Suitable for a wide range of applications on corrosive fluids such as acids, alkalines and solvents Materials: Metal Parts: AISI 316 Spring: Hastelloy C Faces: GFT - SiC Secondary Seal: PTFE ...
Chetra Sealing Technology Pte Ltd [Mechanical Parts & Fabrication Services] [Seals]
It can be used in valves, pumps, expansion joints, mixers and agitators in high-pressure, high-temperature hostile environments of hydrocaron prpcessing, pulp and paper, power station, refineries and industries where effective sealing is vital. It has a very low friction, does ...
Flexealing Co.,Limited [Mechanical Parts & Fabrication Services] [Seals]
Style:Oil Oil Seal Kit, Front Fork, 1977-1984, FL, FLH, FLH-80, FLT-80, FLT Classic ...
JAMES GASKETS [Mechanical Parts & Fabrication Services] [Seals]
: 2000 rpm ( Max ) Speed : (-) 40C to (+) 350 C Temperature : 20 Bar ( Max ) Pressure : 25 mm to 100mm Shaft Diameter Operating Limits : : SS-316, Hastelloy , Aloy Metal Parts : Viton / PTFE Secondary Seals : TC / Sic. / Carbon Vs Sic. / Ceramic / TC Seal Faces Materials : This ...
Unicon Engineering [Mechanical Parts & Fabrication Services] [Seals]
The types of Gas Lift Valve Seals material available are Nitrile, Neoprene, Aflas, Viton and Filled TFE. We stock a wide range of Gas Lift Valve Seals. We supplies these Gas Lift Valve Seals to most of the Oil and Gas industries. Gas Lift valve seal comes in various material. ...
Offshore Seals (Asia) Pte Ltd [Mechanical Parts & Fabrication Services] [Seals]
Parker offers a wide variety of seals which consist of composite seals, metal seals, molded seals, PTFE seals and rotary shaft seals. From the near-absolute vacuum of space to the pressure of 30,000 psi oilfield applications, temperatures from the cold of cryogenic temperatures ...
Prosperity Hydraulic Enterprise Co.,Ltd. [Mechanical Parts & Fabrication Services] [Seals]
Style:Oil Motorcycle Seal, 1.693*2.075*0.374/0.492 ...
YEI SHIEN ENTERPRISE CO.,LTD [Mechanical Parts & Fabrication Services] [Seals]
Description: Pre-cured polyurethane tape sealant with fiberglass carrier and PTFE backing. Designed for sealing and moisture-proofing between aluminum structure and removable panels or floorboards. Product works best when applied under compression between two surfaces. ...
HI-TAK TAPE & Non-Conductive Gaskets [Mechanical Parts & Fabrication Services] [Seals]
In our standart production there are 1100 different sizes of products in which materials NBR, FKM, VMQ and EPDM are used. Any special requirements from our customers for more different sizes can be met by making a new mold. ...
1.SanayiSitesi2827.Sok.No:25Camdibi [Mechanical Parts & Fabrication Services] [Seals]
Metric Size available Speed : 25 m/sec Pressure : Below 1.7 MPa Temperature : - 40 150 degrees Celsius APPLICATIONS: For all types of rotating equipment, pumps, mixers, agitators and compressors. Suitable for use in petrochemical, pharmaceutical, food, pulp and waste water ...
HM MARINE PTE LTD [Mechanical Parts & Fabrication Services] [Seals]
Amply specification Custom-made of different colors and specifications. ...
PTFE INDUSTRY CO.,LTD. [Mechanical Parts & Fabrication Services] [Seals]
Mechanical seals are mainly used for high speed sealing between liquids and two gases the two surface aids the lubrication of the two surface, conduct heat caused by friction and improve the sealing effect. The diameter of the counter face should be the same or larger than that ...
Sivaram & Co [Mechanical Parts & Fabrication Services] [Seals]
