PFE Tester can be used to detect the filtration efficiency and resistance of particles such as masks and filter materials in medical device inspection center, safety protection inspection center, drug inspection center, disease prevention and control center, textile inspection ce
Standard International Group (HK) Limited [2025-01-08 15:23:22 ]
Medical face mask differential pressure tester also called mask breathility tester is to determine the breathability of medical face mask materials. The tester can measure the differential pressure (Delta P) required to draw air through a measured surface area at a constant air f
Standard International Group (HK) Limited [2025-01-08 15:22:30 ]
Application Fabric spray rating tester to determine the resistance of any fabrics, which may or may not have been given a water-repellent finish, to surface wetting by water. It is not intended to predict waterproofness, since it does not measure the penetration of water through
Standard International Group (HK) Limited [2025-01-08 15:21:35 ]
Application This Masks Universal Tensile Strength Tester is designed for conduct tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for rubber, plastic, leather, metal, nylon line,yarn,fabric,paper,aviation, package, construction, petrifac
Standard International Group (HK) Limited [2025-01-08 15:20:39 ]
The Oxygen Index is, perhaps, the most economical and precise quality control test of combustible materials. Its ease of use together with high levels of precision has made this technique a primary characterising and quality control tool to the plastic and electric cable industri
Standard International Group (HK) Limited [2025-01-08 15:18:53 ]
The Vertical Flammability Chamber, designed for American Standards, measures the vertical flame spread for children's sleepwear, fabrics, other textile materials or resilient filling materials used in upholstered furniture. Application The vertical burning of textiles is suitable
Standard International Group (HK) Limited [2025-01-08 15:17:46 ]
Bursting Strength Tester, to test the bursting strength of paper, woven or knitted fabrics, non-woven, fabric and board by the of hydraulic load under a Bursting tester diaphragm of a specific area. Application Fabrics that must bear weight or withstand forces should be tested wi
Standard International Group (HK) Limited [2025-01-08 15:09:04 ]
Elmendorf tearing tester using stable mechanical clamps, specimen is fixed in the clamp and use the equipped blade to cut a crack, specimen is torn along the crack direction by releasing the moveable clamp, convert the work and get value of tearing in a certain length to ballisti
Standard International Group (HK) Limited [2025-01-08 15:06:22 ]
Application： High pressure-servo Fabric Hydrostatic Head Pressure Test Machine is used to test the waterproof properties of fabric through waterproofing work such as canvas, coated fabrics,hood fabric, tarpaulin, rain-proof fabrics and geotextile. Standards AATCC 127 Option 2,
Standard International Group (HK) Limited [2025-01-08 15:03:23 ]
Application Air Permeability Tester, widely used to test the resistance of fabrics (woven, knitted and non-woven textile materials, medical masks) to the passage of air (air flow), the test textile is firmly clamped by a specified rig of selected test head/area to resist the cons
Standard International Group (HK) Limited [2025-01-08 15:02:08 ]
Introduction The textile airflow resistance tester is used to determine the anti-penetration properties of ordinary fabrics and medical protective masks to airflow at a constant flow rate . It is mainly used for the determination of air penetration of textiles ,cotton, and space
Standard International Group (HK) Limited [2025-01-08 15:00:49 ]
F Friction Charging Tester is the antistatic fabric and knitted fabric friction generated by the amount of charged charge test equipment, used to measure the amount of static electricity charge This equipment is used to determine the electrostatic characteristics of friction-char
Standard International Group (HK) Limited [2025-01-08 14:59:58 ]
Introduction Protective clothing flame spread tester is made according to ISO 15025 standard. It can test the flame spread state under the small flame . It is used to simulate the protective clothing is at the risk of ignition to assume the flame spread performance . It is also s
Standard International Group (HK) Limited [2025-01-08 14:57:50 ]
Synthetic Blood Penetration Tester The Mask Integrity Test Accessory (Qinsun) works in tandem with the CBRN Mask Protection Assessment Test System or PortaCount? Respirator Fit Tester to quickly detect leaks in CBRN gas masks and commercial respirators and ensure your personnel a
Standard International Group (HK) Limited [2025-01-08 14:55:44 ]
Mask Leak testing device The Protective Mask Leak Tester Technical Parameters Items Parameters Size 32” (L) x 22.5” (W) x 20” (H) while packed Weight ~90 lbs/41 kg packed, ~60 total unpacked Power Supply 100 to 250 Volts AC, 50/60 Hz Aerosol Reagent Poly-dispersed oil (PAO-
Standard International Group (HK) Limited [2025-01-08 14:54:45 ]
Non-woven Mask synthetic blood Permeability pressure testing equipment Medical masks synthetic blood penetration tester is used to determine the resistance of medical protective masks to penetration by synthetic blood at different test pressures,and can also be used to determine
Standard International Group (HK) Limited [2025-01-08 14:52:04 ]
Bacterial & Viral Filtration Efficiency (BFE/VFE) Tester Bacterial Filtration Efficiency Tester Mask Bacterial Filtration Efficiency Tester Standards YY 0469-2004 Technical requirements for surgical mask BS EN 14683-2014 Medical face masks - Requirements and test methods ASTM F21
Standard International Group (HK) Limited [2025-01-08 14:51:00 ]
The Wet microbial penetration resistance tester is used to determine the performance of the material in the resistance to the penetration of bacteria in the liquid during mechanical friction (the shielding performance of the liquid carrying the bacteria through the mechanical fri
Standard International Group (HK) Limited [2025-01-08 14:49:24 ]
Mask respiratory resistance tester is used to measure the respiratory resistance and expiratory resistance of respirators and masks under the specified conditions. Applicable to the national labor protection supplies inspection agency, mask manufacturers related inspection and in
Standard International Group (HK) Limited [2025-01-08 14:47:24 ]
Mask Visual Field Tester To determine whether the field of vision under the mask meets the standard requirement or not. Feature The hemispherical surface of the visual field(Including the holder) Standard head mold (install electric beads and control switch) Spherical projection
Standard International Group (HK) Limited [2025-01-08 14:46:31 ]
