PEEK is a C-level insulating material, keeps excellent insulating properties under high temperature, high pressure, high humidity and other environments, has wave permeability, dimensional stability and self-lubrication, keeps lower dielectric dissipation factor under various fre
Jilin Joinature Polymer Co.,Ltd. [2023-12-27 17:18:47 ]
The system is not only as simple as wiping the water off the windshield, but also wipes the rainwater on the glass surface into a uniform water film layer, allowing the light to pass through smoothly without refraction to ensure the driver\'s vision is clear and safety driving. A
Guangzhou May Import & Export Trading Co.,Ltd [2023-12-27 17:05:36 ]
Because of legal requirements, almost everywhere cars must be equipped with windshield wiper cutter. The windshield wiper cutter also has the characteristics of heat resistance, cold resistance, acid and alkali resistance, corrosion resistance, can fit the windshield, reducing th
Guangzhou May Import & Export Trading Co.,Ltd [2023-12-27 17:05:14 ]
The clockwise lever of the aftermarket signal light switch turns right, the counterclockwise lever turns left, pushes the lever outwards for high beam, and pulls the lever inward for alternating far and near. The arrow position on the left side of the rotary lever is the driving
Guangzhou May Import & Export Trading Co.,Ltd [2023-12-27 17:04:50 ]
The trumpet electric horn continuously vibrates through the diaphragm, thereby emitting sound waves of a certain tone, and the sound is reinforced through the soundboard and the speaker. The soundboard is rigidly connected to the diaphragm, and it emits accompanying sound when it
Guangzhou May Import & Export Trading Co.,Ltd [2023-12-27 17:04:27 ]
The Pencil Type Ignition Coil combines the high-voltage ignition wire and the ignition coil into one, which reduces energy loss, and improves combustion and fuel efficiency. Each cylinder is assigned a pencil ignition coil, which is directly installed on the top of the spark plug
Guangzhou May Import & Export Trading Co.,Ltd [2023-12-27 17:03:58 ]
The oil-filled ignition coil is the first generation coil of the vehicle. It is an open magnetic circuit ignition coil from MAMPS ignition coil factory , which is generally a filling structure. It is made of oil, and the oil-filled inside is both an insulator and a coolant. It mu
Guangzhou May Import & Export Trading Co.,Ltd [2023-12-27 17:03:35 ]
Nickel alloy spark plugs are the most common and relatively cheap car spark plug. Nickel spark plugs\'s core material is nickel, which is a magnetic, silver-white transition metal, and has a melting point of 1453°C. Nickel spark plugs have a short life and are not as resistant t
Guangzhou May Import & Export Trading Co.,Ltd [2023-12-27 17:03:14 ]
MAPMS supplies car rubber boots for COP and pencil ignition coils, which is made of high-quality silicone, and with withstand high pressure over 40KV and high temperature up to 300 degrees. Bulk buy from ignition rubber boots MAMPS ignition coil factory. Ignition Rubber Boots Key
Guangzhou May Import & Export Trading Co.,Ltd [2023-12-27 17:02:35 ]
Barber Shop, Family Barber Shop, Mullet Cut, Beard Sculpting, Haircuts, Long Layers, Fade, Skin Fade, Flat Top, Drop Fade Cut, Barber Shop, Family Barber Shop, Mullet Cut, Beard Sculpting, Haircuts, Long Layers, Fade, Skin Fade, Flat Top, Drop Fade Cut
Joe's Barber Lounge [2023-12-27 17:01:03 ]
Low-temp flanges are widely used in the manufacture of flanges and fittings, as well as in applications where low-temperature service is required and corrosion resistance is not critical. LOW-TEMP FLANGES PROVIDED BY YUHONG As one of the professional industrial flanges manufactur
YUHONG GROUP CO., LIMITED [2023-12-27 17:00:31 ]
A low-temperature alloy is a general purpose carbon steel, usually in the normalized, normalized, and tempered or quenched and tempered condition. It is typically characterized by moderate strength and impact toughness and is widely used in the manufacture of flanges and fittings
YUHONG GROUP CO., LIMITED [2023-12-27 16:59:56 ]
Inconel flange is suitable for harsh environments at high temperatures and pressures with good mechanical properties. As a professional Inconel flanges manufacturer in China, Yuhong Group provides quality Inconel flanges including Inconel 600 flanges, Inconel 601 flanges, Inconel
YUHONG GROUP CO., LIMITED [2023-12-27 16:59:31 ]
Good resistance makes INCONEL suitable for Inconel pipe fitting in harsh environments at high temperatures and pressures. When the Inconel alloy is heated, a thick and stable oxide layer is passivated on the surface of the alloy to protect the interior of the alloy from corrosion
YUHONG GROUP CO., LIMITED [2023-12-27 16:59:03 ]
Inconel alloy 600 has corrosion resistance to many kinds of corrosive media. Chromium content made this material with better corrosion resistance than Nickel 99.2 (alloy 200) and Nickel 99.2 (alloy 201, low carbon) in the oxidizing environment. Meantime, high Nickel content makes
YUHONG GROUP CO., LIMITED [2023-12-27 16:58:27 ]
Yuhong incoloy 800h flange&incoloy 825 flanges use Incoloy alloy 800&825, which is a nickel-iron-chromium base superalloy, to ensure great carbonization and oxidation resistance even in high-temperature environments. INCOLOY 800&825 FLANGES PROVIDED BY YUHONG Incoloy class 800 fl
YUHONG GROUP CO., LIMITED [2023-12-27 16:57:42 ]
Incoloy is a nickel-iron-chromium base superalloy that resists carbonization and oxidation in high-temperature environments. Incoloy metal alloys are easy to manufacture, using the same machines and processes as stainless steel. Incoloy fitting is primarily chromium and nickel-ba
YUHONG GROUP CO., LIMITED [2023-12-27 16:56:02 ]
FOOD STEAMER STAINLESS STEEL BELT CRIMPING MACHINE This equipment is designed for crimping and forming after welding of food steamer steel rings. It is connected with our automatic laser welding machine via a conveyor belt and then rotated and crimped at high speed. The mechanize
NINGBO XIHE AUTOMATION EQUIPMENT CO.,LTD [2023-12-27 16:48:36 ]
ENAMEL POT STAINLESS STEEL BELT LASER WELDER The equipment adopts advanced laser continuous welding technology, and the overall operation is simple. It is a special equipment for welding enamel pots and stainless steel strips. The width of the steel strip can be adjusted arbitrar
NINGBO XIHE AUTOMATION EQUIPMENT CO.,LTD [2023-12-27 16:48:13 ]
ENAMEL POT STAINLESS STEEL BELT CRIMPING MACHINE The equipment is designed for crimping and forming after welding of stainless steel rings of enamel pots. It is connected with our automatic laser welding equipment through a manipulator, and then rotated and crimped at high speed.
NINGBO XIHE AUTOMATION EQUIPMENT CO.,LTD [2023-12-27 16:47:46 ]
