Made of pure virginal PTFE, GINSEAL PTFE gasket is a cost-favorable alternative for use with low mechanical stress and low pressure-temperature load. The gasket is highly resistant to practically all chemicals except for fluorine, halogen oxides, molten and dissolved alkali metal
Zhejiang Delong Teflon And Plastic Technology Co., Ltd [2015-08-08 15:53:52 ]
One side sodium etched PTFE sheet is an amazing non-stick material, but when you need to glue it to the surface of another material or in order to bond standard PTFE to another surface such as stainless steel, a process called "etching" is required. Typical applications would inc
Zhejiang Delong Teflon And Plastic Technology Co., Ltd [2015-08-08 15:53:15 ]
1.Chemical Engineering Corrosion and wear resistantance mechanical parts 2.Thermal power coal handling, storage of coal, warehousing chute lining 3.Coal processing sieve plate, filter, U-underground coal chute 4.Concrete cement raw and finished product silo silo lining 5.Grain fo
Zhejiang Delong Teflon And Plastic Technology Co., Ltd [2015-08-08 15:52:45 ]
Fabric Phenolic sheets for structural and mechanical applications. Phenolic is a hard, dense material made by applying heat and pressure to layers of fabric, impregnated with a synthetic resin. These phenolics are approximately half the weight of aluminum and their physical tough
Zhejiang Delong Teflon And Plastic Technology Co., Ltd [2015-08-08 15:52:41 ]
1. High chemical and corrosion resistance 2. Easily machined and cut 3. Light weight and rigid 4. Easy to maintain and clean 5. High tensile strength 6. Excellent thermal insulating properties 7. Excellent abrasion resistance 8. Excellent dielectric properties http://www plas-ptf
Zhejiang Delong Teflon And Plastic Technology Co., Ltd [2015-08-08 15:52:12 ]
PTFE molded rod is manufactured by molding method It is used for electrical Insulation, seal, Antisticking materials. Brand Name Delong Size optional Price term FOB Shanghai Payment T/T http://www plas-ptfe com
Zhejiang Delong Teflon And Plastic Technology Co., Ltd [2015-08-08 15:52:06 ]
Polyformaldehyde has excellent physical, mechanical, heat and electric properties, solvent resistance, abrasion resistance, creep, fatigue resistance and other properties, is widely used to replace a variety of non-ferrous metal and alloy production automobile, machinery, instrum
Zhejiang Delong Teflon And Plastic Technology Co., Ltd [2015-08-08 15:52:00 ]
1.Good electrical resistant 2.Good sliding property 3.Impact resistant 4.Good machinability White,, Blue or Customized 1~60 White, Blue or Customized 10~100 http://www plas-ptfe com
Zhejiang Delong Teflon And Plastic Technology Co., Ltd [2015-08-08 15:51:10 ]
HDPE Sheet is very economical and can provide an engineering plastic with equal or greater performance advantages and save end users a significant amount of money. HDPE Sheet is light and easy to machine to help improve machining times. HDPE Sheet is very tough and almost impossi
Zhejiang Delong Teflon And Plastic Technology Co., Ltd [2015-08-08 15:51:07 ]
The microwave energy can go deep into the materials and achieves the uniform and simultaneous temperature rising of all parts in a short time. It has the automatic balancing ability, which avoids the heat loss of the environment and equipment. The equipment is applied in a wide r
Nanjing SanLe Microwave Technology Development Co., Ltd [2015-08-08 15:43:17 ]
The equipment is used for the vulcanization and foaming of various forms of rubber products. It is a modern high-tech means designed in accordance with the rubber vulcanization process and all equipment originals have been homemade to fully guarantee the application and timely te
Nanjing SanLe Microwave Technology Development Co., Ltd [2015-08-08 15:43:04 ]
The equipment dehydrates the sludge taking use of the microwave’s penetration and heating characteristic from the inside to the outside. The equipment has a small floor space and can operate for 8000 hours at full power without interruptions safely and reliably. It can reduce t
Nanjing SanLe Microwave Technology Development Co., Ltd [2015-08-08 15:42:51 ]
The equipment is used for the high temperature smelting of ores taking use of the microwave’s selectivity and heating characteristic from the inside to the outside. Its most outstanding feature is the smelting temperature is low, which can save the heat energy needed by the hig
Nanjing SanLe Microwave Technology Development Co., Ltd [2015-08-08 15:42:38 ]
The company is currently the only domestic company which develops and manufactures series of 915MHz and 2450MHz band high- power continuous wave magnetrons and has achieve the industrial application. It also leads the domestic research in high- power injection-locked frequency co
Nanjing SanLe Microwave Technology Development Co., Ltd [2015-08-08 15:42:23 ]
Microwave frequency 2450MHz 2450MHz Magnetron type 10kW 15kW Microwave power CK-619 CK-2091 Cooling water cooling water cooling Input Power 380V 380V Control mode PLC+touchscreen PLC+touchscreen http://www microwave-world com
Nanjing SanLe Microwave Technology Development Co., Ltd [2015-08-08 15:42:15 ]
Input voltage range 180Vac to 264Vac Normal voltage range 200Vac to 240Vac Frequency range 47Hz-63Hz Max input ac current 22A max at full load condition Leakage Current Less Than 0.5mA @240Vac input Normal output power 2800W Regulation output power range 500-2800W(Continued work,
Nanjing SanLe Microwave Technology Development Co., Ltd [2015-08-08 15:41:55 ]
Input voltage range 180Vac to 264Vac Normal voltage range 200Vac to 240Vac Frequency range 47Hz-63Hz Max input ac current 10A max at full load condition Leakage Current Less Than 0.5mA @240Vac input Regulation input power range 500-1600W Max endure input voltage 300Vac Rated Outp
Nanjing SanLe Microwave Technology Development Co., Ltd [2015-08-08 15:41:43 ]
Frequency range (f) 2450±20MHz Filament voltage when preheating 6.4±0.3V Filament current when preheating 66A Filament current when working 3A Anodic voltage ≤13kV Anodic current ≤3.3A Output power ≥30kW Load VSWR ≤1.15 1 Cooling mode water cooling Energy transport mode
Nanjing SanLe Microwave Technology Development Co., Ltd [2015-08-08 15:41:29 ]
Frequency range (f) 2450±30MHz Filament voltage when preheating 8.5±0.7V Filament current when preheating 47A Filament current when working 29A Anodic voltage ≤12.6kV Anodic current ≤1.8A Output power ≥15kW Load VSWR ≤2.0 1 Cooling mode water cooling Energy transport mo
Nanjing SanLe Microwave Technology Development Co., Ltd [2015-08-08 15:41:20 ]
Frequency range (f) 2450±50MHz Filament voltage when preheating 8.5±0.7V Filament current when preheating 47A Filament current when working 36A Anodic voltage ≤10kV Anodic current ≤1.6A Output power ≥10kW Load VSWR ≤2.5 1 Cooling mode water cooling Energy transport mode
Nanjing SanLe Microwave Technology Development Co., Ltd [2015-08-08 15:41:05 ]
