1）DSHD-0633 Liquid Petroleum Asphalt Flash Point Tester is designed and developed as per T0633 “Liquid Petroleum Asphalt Flash Point Test (Tag Open Cup Methods)” in the Industry Standard JTJ052 Specification and Test Methods of Bitumen and Bituminous Mixture for Highway ...
[Measurement & Analysis Instruments] [Analyzers] [2014-06-26 21:49:31 ]
Contains: 1. DSHA-1 Slurry Sand Content Tester 2. DSHB-1 Slurry Gravimeter 3. DSH 1006 Slurry Viscometer ...
[Measurement & Analysis Instruments] [Analyzers] [2014-06-26 21:45:25 ]
1.DSHA-1 Slurry Sand Content Tester 2.DSHS-1 Slurry Water Loss Tester 3.DSHB-1 Slurry Gravimeter 4.DSH1006 Slurry Viscometer ...
[Measurement & Analysis Instruments] [Analyzers] [2014-06-26 21:44:59 ]
1) DSHS-1 Slurry Water Loss Tester is used to determine the water loss of drilling slurry if it goes through a certain size of filtration area within a certain time (30 minute) under stipulated working pressure (0.69 MPa).It has two types, with an inflator, or with a ...
[Measurement & Analysis Instruments] [Analyzers] [2014-06-26 21:44:35 ]
1)DSHB-1 Slurry Gravimeter is designed and developed as per the Industry Standard of Petrochemical of People’s Republic of China SY/T 5381 “Technical Specification for Drilling Fluid Gravimeter”. The instrument is applied to determine gravity of slurry in the drilling ...
[Measurement & Analysis Instruments] [Analyzers] [2014-06-26 21:44:06 ]
DSHA-1 Slurry Sand Content Tester is used to test the sand content of slurry at well site or in the laboratory.The instrument gets the result by the volume change after slurry going through the sieve. Represented with percentage. ...
[Measurement & Analysis Instruments] [Analyzers] [2014-06-26 21:43:39 ]
I. Product introduction: DSH 1006 Slurry Viscometer is applied to measure the viscosity of slurry. The viscosity of slurry is determined by measuring the elapsed time for flowing out 500 ml slurry from the1006 Viscometer and the unit is second. II. Main technical specifications ...
[Measurement & Analysis Instruments] [Analyzers] [2014-06-26 21:42:47 ]
1)DSHD-4508J Asphalt Ductility Tester is designed and developed as per the National Standard of People’s Republic of China GB/T4508 “Test Methods for Ductility of Petroleum Asphalt”, and T0605 “Asphalt Ductility Test” in the Industry Standard of People’s Republic of ...
[Measurement & Analysis Instruments] [Analyzers] [2014-06-26 21:39:07 ]
1)DSHD-4508G Low Temperature Asphalt Ductility Tester is designed and developed as per the National Standard GB/T 4508 “Test Methods for Ductility of Petroleum Asphalt”, and T0605 “Asphalt Ductility Test” in the Industry Standard JTJ052 Specification and Test Methods of ...
[Measurement & Analysis Instruments] [Analyzers] [2014-06-26 21:38:32 ]
DSHD-4508F Asphalt Ductility Tester is designed and developed based on the regulations of standards of GB/T4508、ASTMD113、T0605 bitumen ductility test, to determinate bitumen length in regulated temperature and speed stressed and be broken, and to determinate stress force ...
[Measurement & Analysis Instruments] [Analyzers] [2014-06-26 21:38:07 ]
DSHD-4508D Asphalt Ductility Tester ...
[Measurement & Analysis Instruments] [Analyzers] [2014-06-26 21:37:37 ]
1）DSHS-1 Slurry Water Loss Tester is designed and developed as per standards GB/T4508, T0605 bitumen ductility test in the industrial standard JTJ052 and ASTM D113. 2）DSHS-1 Slurry Water Loss Tester is applied to determinate the ductility of bitumen -the length while the ...
[Measurement & Analysis Instruments] [Analyzers] [2014-06-26 21:37:12 ]
1) DSHD-2801A Penetrometer is designed and developed as per the National Standard GB/T269 “Test Methods for Cone Penetration of Lubricating Grease and Petroleum Grease”, GB/T4509 “Test Methods for Needle Penetration of Petroleum Asphalt”, and the Industry Standard T0604 ...
[Measurement & Analysis Instruments] [Analyzers] [2014-06-26 21:36:32 ]
DSHD-2801C Penetrometer is designed and developed as per the National Standard GB/T 4509 “Test Methods for Needle Penetration of Petroleum Asphalt”, GB/T 269 “Test Methods for Cone Penetration of Lubricating Grease and Petroleum Grease”, and T0604 “Asphalt Penetration ...
[Measurement & Analysis Instruments] [Analyzers] [2014-06-26 21:35:27 ]
1:DSHD-2801E1 Penetrometer is designed and developed as per the National Standard GB/T4509 “Test Methods for Needle Penetration of Petroleum Asphalt”, and T0604 “Asphalt Needle Penetration Test” in the Industry Standard JTJ052 Specification and Test Methods of Bitumen ...
[Measurement & Analysis Instruments] [Analyzers] [2014-06-26 21:34:59 ]
1:DSHD-2801F Low Temperature Penetrometer is designed and developed as per the National Standard GB/T4509 “Test Methods for Needle Penetration of Petroleum Asphalt”, and T0604 “Asphalt Needle Penetration Test” in the Industry Standard JTJ052 Specification and Test ...
[Measurement & Analysis Instruments] [Analyzers] [2014-06-26 21:34:27 ]
DSHD-2801G Penetrometer is designed and developed as per the requirements about penetrometer and the accessories stipulated in the National Standard GB/T 4985 “Test Methods for Needle Penetration of Wax”. 1. The needle penetration of wax is expressed as the depth that a ...
[Measurement & Analysis Instruments] [Analyzers] [2014-06-26 21:34:02 ]
1:DSHD-2801I Automatic Penetrometer is designed and developed as per the National Standard GB/T 4509 “Test Methods for Needle Penetration of Petroleum Asphalt”, and T0604 “Asphalt Needle Penetration Test” in the Industry Standard JTJ052 Specification and Test Methods of ...
[Measurement & Analysis Instruments] [Analyzers] [2014-06-26 21:32:28 ]
DSHD-2801E Penetrometer is designed and developed as per the National Standard of People's Republic of China GB/T4509 “Test Methods for Penetration of Asphalt” and T0604 “Asphalt Penetration Test”in the Industry Standard of People’s Republic of China,JTJ052-2000 ...
[Measurement & Analysis Instruments] [Analyzers] [2014-06-26 21:30:35 ]
The oil bath is a high precision instrument developed and made by applying advanced micro-electronics technology. This instrument has characteristics of high temperature controlling accuracy, stability and reliability. It can be widely used in the field of petroleum oils, power ...
[Measurement & Analysis Instruments] [Analyzers] [2014-06-26 21:19:52 ]
