Gas In / GAS Out connections are 1/8ths or, if required, 1/4 BSP threaded. SELECTATEC MANIFOLDS - Single and Two position Selectatec Manifolds. Complete with "Cartridge" type vaporiser ports for easy of servicing. Gas In / GAS Out connections are 1/8ths or, if required, 1/4 BSP t
Autotaps thermostatic water valve When you buy any automatic tap with 'single' supply What is a Thermostatic mixing valve?A Thermostatic Mixing Valve is a device that mix or blends hot water (usually stored at temperatures high enough to kill bacteria) with cold water to ensure c
Power supply available for solenoid valves 24vAc 50/60Hz and 230vAc solenoid coils Empire Controls range of direct acting solenoid valves are suitable for water, air and oil at temperatures of -10 deg C to +90deg C. The servo assisted solenoid valve has a far higher pressure rati
Resilient seat provides positive shut off ?Full flow area These valves are designed for vertical upward flow, installed on the pump suction, FSI Foot Valves prevent the pump column from draining upon pump shutdown. Silent during operating and normally closed, the valve has a cent
KH-YS800 Y-STRAINER VALVES KH-YS800 Y-STRAINER VALVES SPECIFICATIONS Investment Casting Y-Type Screwed-In Cap S S.316 Screen Connecting Threads ANSI B2.1BS21DIN Working Pressure 800 WOG
he switch is wired with both a normally open and a normally closed contact. Located in the cab of the locomotive, the emergency valve with electrical switch provides a direct means of venting brake pipe air pressure to effect an emergency train brake application. When this valve
connections between glass and plasterboard
Disc Check Valve Technical Features " Body valve painted GG25 cast iron" Flanged ends according to DIN 2501 PN 16" Seal NBR" Stem and guide brass until DN 100 cast iron GG25 from DN 125 to DN 250" Silent closing" Nominal working pressure 16 bar" Working temperature -10
These valves are suitable for use in systems with high pressure and temperature conditions (steam, feed water, etc.). These valves are suitable for use in systems with high pressure and temperature conditions (steam, feed water, etc.). The valves are forged in stainless or carbon
