Including low iron float glass and low iron patterned glass. LOW IRON FLOAT GLASS BRIEF INTRODUCTION Low iron float glass is also called ultra clear glass, high transmittance glass. It is a new type of high grade glass that has high performance and multifunction. It has the chara
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:47:24 ]
PRODUCTION PROCESS Using the high quality raw materials from both domestic and abroad ,such as the silica sand ,soda ash,salt cake, dolomite,etc. as our material and then sent to furnace after accurate weighting, checking and mixing, with heavy oil as fuel. They are melted into g
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:46:24 ]
PRODUCTION PROCESS The same as in float glass production. The only variation is the colorants mixed at the beginning with the standard raw materials. Different additives may produce differently colored glasses. FEATURE 1. It can be bent, tempered or heat strengthened and in addit
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:45:54 ]
PRODUCTION PROCESS Insulated glass (IGU) is also called multi-layered glass. It is composed of two sheets of float glass or other kinds of glass, between the two sheets of glass, there is an aluminum spacer filled with desiccant. The aluminum spacer and sheets of glass are adhere
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:44:56 ]
PRODUCTION PROCESS Insulated glass (IGU) is also called multi-layered glass. It is composed of two sheets of float glass or other kinds of glass, between the two sheets of glass, there is an aluminum spacer filled with desiccant. The aluminum spacer and sheets of glass are adhere
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:43:59 ]
PRODUCTION PROCESS What\'s Low-E Glass? Low emissivity coated glass is also called Low-E glass. There are two types of Low-E glass hard coat and soft coat. Hard coat Low-E glass is manufactured by pouring a thin layer of molten tin onto a sheet of glass while the glass is still s
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:43:31 ]
PRODUCTION PROCESS It is manufactured by permanently bonding two or more lites of glass with layers of polyvinyl butyral (PVB) interlayer, under heat and pressure, to create a single construction. FEATURE 1. Safety. Even if the glass is broken, the tough interlayer film prevents
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:42:28 ]
PRODUCTION PROCESS In the production of flat glass, the molten silica-based mix is cooled slowly under carefully controlled conditions. This annealing procedure removes undesirable stresses from the glass. Cooling occurs in an annealing \"lehr\"; and then annealed glass is heated
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:41:51 ]
PRODUCTION PROCESS In the production of flat glass, the molten silica-based mix is cooled slowly under carefully controlled conditions. This annealing procedure removes undesirable stresses from the glass. Cooling occurs in an annealing \"lehr\"; and then annealed glass is heated
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:41:19 ]
PRODUCTION PROCESS In the production of flat glass, the molten silica-based mix is cooled slowly under carefully controlled conditions. This annealing procedure removes undesirable stresses from the glass. Cooling occurs in an annealing \"lehr\"; and then annealed glass is heated
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:40:47 ]
PRODUCTION PROCESS Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, etc. as our material and then sent to furnace after accurate weighting, checking and mixing, with heavy oil as fuel. They are melted into
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:40:15 ]
3 4 5 6 8mm Clear Mistlite Patterned Glass for window furniture door PRODUCTION PROCESS Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, etc. as our material and then sent to furnace after accurate weighti
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:27:09 ]
1.Specifications (1) one lamp (2)PUVA light (3)Psoriasis,vitiligo pityriasis rosea and eczema (4)Simple operation,low price (5)With CE 2.UV Phototherapy lamp (1) safe equipment for handheld home use device (2) One unit lamp for home use (3)Philips PUVA lamp (4)Psoriasis,vitiligo
Kernel Medical Equipment Co.,Ltd [2017-05-24 10:26:43 ]
PRODUCTION PROCESS Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, etc. as our material and then sent to furnace after accurate weighting, checking and mixing, with heavy oil as fuel. They are melted into
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:23:52 ]
PRODUCTION PROCESS Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, etc. as our material and then sent to furnace after accurate weighting, checking and mixing, with heavy oil as fuel. They are melted into
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:22:47 ]
PRODUCTION PROCESS Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, etc. as our material and then sent to furnace after accurate weighting, checking and mixing, with heavy oil as fuel. They are melted into
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:21:23 ]
PRODUCTION PROCESS It is produced by using CVD technology (chemical vapor deposition) that creates a perfectly uniform layer of metal oxide chemically bonded to the surface of the glass. As this hard chemical layer is fully bonded to the glass, the reflective glass can be cut, be
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:20:32 ]
PRODUCTION PROCESS It is produced by using CVD technology (chemical vapor deposition) that creates a perfectly uniform layer of metal oxide chemically bonded to the surface of the glass. As this hard chemical layer is fully bonded to the glass, the reflective glass can be cut, be
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:19:41 ]
PRODUCTION PROCESS Aluminum Mirror sheet is produced through vacuum coating. Let the melt aluminum splash on the surface of clean quality float glass in the vacuum chamber, and then coated with two layers of protective paint. FEATURE 1. Made of waveless float glass(our float glas
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:17:48 ]
PRODUCTION PROCESS Made through a chemical sedimentation process. A specially treated silver sheet is coated on quality waveless float glass, followed by a sheet of copper, and then finished with two layers of paint for protection. FEATURE 1. Made of waveless float glass(our floa
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:16:38 ]
