1.1Application GDJB-PC is applied to test the relay unit in relay protection system. At the same time GDJB-PC could be considered as a universal three phase AC/DC voltage source or current source. 1.2Functions 1 ) AC current and voltage based protection relay unit test 2) DC curr
重庆格纳迪机电设备有限公司 [2014-12-07 08:07:46 ]
1.1 Application GDDW-grounding resistance tester is applied to measure the grounding resistance in power station or generator station with non-power frequency. All test results could be printed by micro printer 1.2Technique index 1.Measurementscope 0～150Ω(includingimpedanceofc
重庆格纳迪机电设备有限公司 [2014-12-07 08:05:12 ]
1.1Application The tester GD2571 is applied to measure the earth resistance of equipments and conductive and resistance low resistance circuit in power system 1.2Technical parameters 1 Measurement range and error 0~1.999ohm <3%RDG+1D Resolution 0.001ohm 2~19.99ohm <1.5%RDG+1D Res
重庆格纳迪机电设备有限公司 [2014-12-07 08:04:30 ]
1.1 Application GDGS automatic tan delta tester is applied to measure the dielectric loss and capacitor value of insulation materials in high voltage power equipment. The non-power frequency voltage source is integrated in the tester to avoid power frequency interference. That ma
重庆格纳迪机电设备有限公司 [2014-12-07 08:01:59 ]
1.1 General introduction The tester can record switch operation waveform in overall process. The longest time is 6.4s It can test various parameters such as transition waveform, transition time, transition resistance and three phase synchronization one time and analyze results au
重庆格纳迪机电设备有限公司 [2014-12-07 08:00:56 ]
1 Functions 1. The voltage ratio measurement for three or singe phase transformer 2. The group vector measurement for three phase transformer. 3. The polarity measurement for single phase transformer or CT/PT 4. Voltage ratio error calculation 5. Current transformer ratio measure
重庆格纳迪机电设备有限公司 [2014-12-07 07:59:30 ]
1.1Application GDZC Series winding resistance tester are applied to measure the DC resistance of inductance circuit such as power transformer coil, current transformer coil and so on. Also the tester could be applied to measure the cable resistance in 4-wire mode. 1.2Functions 1
重庆格纳迪机电设备有限公司 [2014-12-07 07:58:49 ]
1.1Functions 1 Breakdown test of user-defined 2 Proof test 3 Calibration interface for customers 4 Uploading data to PC and making word report automatically. 5 Result print 1.2Technique index 1 Output voltage AC 0~80KV 2 Three vessels test at the same time 3 Rate of voltage rise
重庆格纳迪机电设备有限公司 [2014-12-07 07:58:04 ]
1.1 Functions 1 Breakdown test of user-defined 2 Proof test 3 IEC60156/IS6792/BS5874 test 4 ASTM D1816 standard test 5 ASTM D877 standard test 6 5 minutes standard test 7 Manual test 8 Calibration interface for customers 9 Uploading data to PC and making word report automatically
重庆格纳迪机电设备有限公司 [2014-12-07 07:57:17 ]
1.1 Functions 1 Breakdown test of user-defined 2 Proof test 3 Calibration interface for customers 4 Uploading data to PC and making word report automatically. 5 Result print 1.2Technique index 1 Output voltage AC 0~80KV/AC 0~100KV 2 Rate of voltage rise 2KV/s±10% 3 Measuring pre
重庆格纳迪机电设备有限公司 [2014-12-07 07:56:32 ]
1.1 Functions 1 Breakdown test of user-defined 2 Proof test 3 Calibration interface for customers 4 Result print 1.2Technique index 1 Output voltage AC 0~80KV 2 Rate of voltage rise 2KV/s±10% 3 Measuring precision 3%RDG+0.3%FS 4 Test times setting 1-9 5 Mixing time setting 0~99
重庆格纳迪机电设备有限公司 [2014-12-07 07:55:45 ]
Tester Introduction There are four DC currents to select for GDZC-20 which has a large output power ， the power of the tester itself is very little. Used four lines, it is quick, stable, high precision for testing the winding resistance . In addition, it has a strong ability fo
重庆格纳迪机电设备有限公司 [2014-12-07 07:52:53 ]
1.Introduction The DC resistance of transformer is used for testing, installing and exchanging the semi-finished or finished transformer. It’s also a necessity for power department to do preventive trials. It can effectively help you to find disfigurements in the manufacturing
重庆格纳迪机电设备有限公司 [2014-12-07 07:51:11 ]
1 Main Functions 1) Test standard IEC62271 2) Closing and opening time measurement of 12 channels 3) Max difference of closing or opening time measurement of three phases 4) C-O and O-C time measurement 5) Rated operation sequence test 6) Bounce time and frequency measurement of
重庆格纳迪机电设备有限公司 [2014-12-07 07:49:41 ]
1 Main Functions 1) Closing and opening time measurement of 12 channels 2) Max difference of closing or opening time measurement of three phases 3) Bounce time and frequency measurement of breaker closing 4) Circuit breaker closing and opening speed measurement 5) Travel-time, Co
重庆格纳迪机电设备有限公司 [2014-12-07 07:48:51 ]
1.1 Application GDHL Series contact resistance tester is applied in circuit breaker testing and power cable connection quality inspection. The max test current of contact resistance tester could be reached 600A. All the test results could be saved in tester or printed by micro pr
重庆格纳迪机电设备有限公司 [2014-12-07 07:47:56 ]
1.1 Application GDKZ-IV vacuum tester is applied to measure the arc interrupter vacuum degree of vacuum circuit breaker. It is to operation and all the test results could be printed by the micro printer. 1.2 Technique index 1 Measurement range 10 -5- 10 -1 Pa 2 Max measurement er
重庆格纳迪机电设备有限公司 [2014-12-07 07:46:25 ]
1 Technique index 1) Power supply AC220V ± 10% 50Hz ± 10% 2) Temperature － 10~40 ℃ humidity <80% 3) Insulation resistance >2Mohm, 1.5kv voltage withstand 1minute no breakdown. 4) Time measurement range 400ms, resolution 0.1ms Time measurement error <0.2ms 5) Speed measureme
重庆格纳迪机电设备有限公司 [2014-12-07 07:43:47 ]
1 General introduction Contact resistance tester output DC 200A/100A current to test the contact resistance of circuit breaker or high current cable contacts. It is designed according to IEC62271. The main application of the tester is measurement of circuit breaker contact resist
重庆格纳迪机电设备有限公司 [2014-12-07 07:41:44 ]
Description Product Description Wide format original printhead for Epson 7600 printhead Product feature 1. The printhead is new and original. 2. The printhead is for Epson 7600 9600 2100 2200 wide format printer. 3. The printhead comes from Epson company. 4. The printhead is made
PT. Pompa-Electronic [2014-12-06 13:16:54 ]
