Product Description WT2080 LED Power Driver Test Instrument is the comprehensive test instrument for LED drive power which is according to GB/T 24825-2009 and IEC 62384 2006. It can measure the following parameters Input Characteristics Test (AC&DC), Output Characteristics Test (
Lisun Electronics (Shanghai) Co., Ltd [2019-04-22 16:02:42 ]
Product Description LMS-6000 Digital portable spectroradiometer with automatically self calibration test led lamps and outdoor street lights cct lux 1. Spectral platform telephoto asymmetrical crossed CT system. 2. Wavelength range 380~780nm(300~950nm), FWHM 2nm, Spectral resolut
Lisun Electronics (Shanghai) Co., Ltd [2019-04-22 15:49:55 ]
Product Description Meter Lumen - LPCE-2(LMS-9000A) High Precision luminous flux color temperature testing equipment for LED lamps LPCE-2(LMS-9000) Integrating Sphere Spectrophotometer System is high precision CCD Spectroradiometer & Integrating Sphere Test System, it is suitable
Lisun Electronics (Shanghai) Co., Ltd [2019-04-22 15:38:44 ]
Specifications • The tested luminaire rotates around the mirror with an angle of (γ) ±180° (or 0-360°) and the tested luminaire rotates around itself with an angle of (C) ±180° (or 0-360°). • The accuracy of angle 0.05°, Resolution of angle 0.001° • Accuracy of pho
Lisun Electronics (Shanghai) Co., Ltd [2019-04-22 15:29:59 ]
1.2D-20D solid non-siliconzied polyester staple fiber Length 32mm, 38mm, 44mm, 51mm, 64mm, 76mm, 102mm End use spinning, nonwoven fabric Color white, black and dope dyed colored Grade virgin and recycled
Jiangyin Huacai Textile Co., Ltd [2019-04-22 15:04:50 ]
1.2D-20D solid non-siliconzied polyester staple fiber Length 32mm, 38mm, 44mm, 51mm, 64mm, 76mm, 102mm End use spinning, nonwoven fabric Color white, black and dope dyed colored Grade virgin and recycled
Jiangyin Huacai Textile Co., Ltd [2019-04-22 14:56:32 ]
Rolled Copper Foil has extraordinary strength, bendability, ductility and lustrous surface, plus its excellent mechanical capacity, makes it irreplaceable as a raw material. Thickness Range 0.0004inch~0.006inch (0.01mm-0.15mm) ... Width Range 0.16inch~ 24 inch (4mm- 6 00mm) ... T
Shanghai Allotech Industrial Co., Ltd [2019-04-22 13:38:09 ]
According to the design ideas and the product prototype provided by the customer,we analyze, research and develop product functions Then we purchase the materials needed for production and carry out production sample If the sample is confirmed by the customer, we start mass produ
Shenzhen Jing Mei Tai Hardware & Plastic Products Co., Ltd. [2019-04-22 11:58:21 ]
According to the drawings provided by the customer, we purchase the raw materials We use the punching machine, the CNC lathe and the CNC miller to produce the products The quality of the products is inspected by the testing instruments to meet the requirements of the customers, a
Shenzhen Jing Mei Tai Hardware & Plastic Products Co., Ltd. [2019-04-22 11:56:55 ]
According to the drawings provided by the customer, we purchase the raw materials We use the punching machine, the CNC lathe and the CNC miller to produce the products The quality of the products is inspected by the testing instruments to meet the requirements of the customers, a
Shenzhen Jing Mei Tai Hardware & Plastic Products Co., Ltd. [2019-04-22 11:55:24 ]
We use a continuous die table (punch press) and a mold for multiple deformations to achieve the shape requirements. The surface of the aluminum product is treated by sand blasting, polishing, wire drawing, high-light cutting, anodizing, two-color cathode, etc The qualified produc
Shenzhen Jing Mei Tai Hardware & Plastic Products Co., Ltd. [2019-04-22 11:54:05 ]
The cable is cut according to the customer\'s request, and then the parts are put into the parts The products are obtained by stripping,dispensing, fiber-curing, hand-grinding,grinding and other procedures After the 3D inspection, end-face inspection and other procedures, the qua
Shenzhen Jing Mei Tai Hardware & Plastic Products Co., Ltd. [2019-04-22 11:52:43 ]
The raw materials are cut based on the requirements of the drawings, and the total length is controlled within the standard range Next the product is placed in the CNC lathe to form the outer diameter based on the drawings so that the outer diameter concentricity is within the st
Shenzhen Jing Mei Tai Hardware & Plastic Products Co., Ltd. [2019-04-22 11:50:58 ]
According to the customer\'s drawing requirements,we purchase the materials needed for production and program the CNC lathe, and use the machine to process the products Then we use the instrument for quality inspection to meet the customers\' requirements Finally we treat the qua
Shenzhen Jing Mei Tai Hardware & Plastic Products Co., Ltd. [2019-04-22 11:48:48 ]
According to the customer\'s drawing requirements,we purchase the materials needed for production and program the CNC miller, and use the machine to process the products Then we use the instrument for quality inspection to meet the customers\' requirements Finally we treat the qu
Shenzhen Jing Mei Tai Hardware & Plastic Products Co., Ltd. [2019-04-22 11:47:41 ]
Metal product processing is a technology that we process metal materials into articles, parts, and components. Metal materials are processed by cold working (machining, cold rolling, cold forging, stamping, etc.) or hot working (casting, hot rolling, forging, welding, heat treatm
Shenzhen Jing Mei Tai Hardware & Plastic Products Co., Ltd. [2019-04-22 11:46:34 ]
According to the samples or the drawings which were provided by customers,we analyze the production data and purchase the required environmentally friendly raw materials for classified production Once the producing samples were confirmed by customers,we start batch production,pac
Shenzhen Jing Mei Tai Hardware & Plastic Products Co., Ltd. [2019-04-22 11:39:33 ]
We use the communication product mold provided by the customer or made by us According to the customer\'s product data ,we install the commodity mold on the injection machine to produce We test the quality of the injection molding product to meet the customer\'s requirements Then
Shenzhen Jing Mei Tai Hardware & Plastic Products Co., Ltd. [2019-04-22 11:37:46 ]
We use the home appliance mold provided by the customer or made by us According to the customer\'s product data ,we install the commodity mold on the injection machine to produce We test the quality of the injection molding product to meet the customer\'s requirements Then accord
Shenzhen Jing Mei Tai Hardware & Plastic Products Co., Ltd. [2019-04-22 11:36:20 ]
We use the toy mold provided by the customer or made by us According to the customer\'s product data ,we install the commodity mold on the injection machine to produce We test the quality of the injection molding product to meet the customer\'s requirements Then according to the
Shenzhen Jing Mei Tai Hardware & Plastic Products Co., Ltd. [2019-04-22 11:35:32 ]
