Product description It is based on deeply refined and high viscosity basic oil with adding many kinds of additives, such as lubricant, antirust, antifoam, EP additives and antioxidants, etc. volatilization rate 80% Product performance Good EP
SKALN LUBRICANT OIL [2017-05-24 14:08:29 ]
Product Description Temperature Chain Oil 600 is specially designed for automatic and semi-automatic system,like the drip, shower and spray system. It\'s suitable for continuous working condition around the temperature of 290℃. We particularly
SKALN LUBRICANT OIL [2017-05-24 14:06:55 ]
Product description It\'s a kind of multifunctional, environmental, clean working liquid with anti-rust property and long service life for WEDM. It\'s suitable for high-speed, middle-speed wire moving and super high system of WEDM. Product performance The
SKALN LUBRICANT OIL [2017-05-24 14:04:15 ]
Product performance The working liquid is special for WEDM, and it has high accuracy property, high efficiency property and high clean property. It can improve the working accuracy and it is 3 times than conventional emulsion. As for the high power,
SKALN LUBRICANT OIL [2017-05-24 14:03:02 ]
Product Parameter Iterm SKALN Vacuum Quenching Oil kinematic viscosity( 40 ℃), mm2/s 107 Flash Point(open), ℃ 230 Moisture No Corrosion( T 2 copper ， 100 ℃， 3h ),grade 1 saturated vapor pressure , Pa 8.9
SKALN LUBRICANT OIL [2017-05-24 13:59:01 ]
PRODUCTION PROCESS It is manufactured by permanently bonding two or more lites of glass with layers of polyvinyl butyral (PVB) interlayer, under heat and pressure, to create a single construction. FEATURE 1. Safety. Even if the glass is broken, the tough interlayer film prevents
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:57:02 ]
Intended Application patients with skin diseases of vitiligo, psoriasis, pityriasis rosea, eczema are suitable for the ultraviolet irradiation treatment. Products are designed for treatment by patients themselves at home under doctor\\\'s guidance. Feature s l (1) Small size, lig
Kernel Medical Equipment Co.,Ltd [2017-05-24 10:53:51 ]
PRODUCTION PROCESS In the production of flat glass, the molten silica-based mix is cooled slowly under carefully controlled conditions. This annealing procedure removes undesirable stresses from the glass. Cooling occurs in an annealing \"lehr\"; and then annealed glass is heated
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:47:56 ]
Borosilicate Float Glass2.6(BG26) Characteristics 1.Great heat resitance performance, stable chemical property; 2.High light transmission. Application 1.Household electrical appliance. 2.Fireplace glass. Technical Data Dimensions(mm) 1200x600,1200x900,1200x1800,othe format upon r
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:46:56 ]
PRODUCTION PROCESS Insulated glass (IGU) is also called multi-layered glass. It is composed of two sheets of float glass or other kinds of glass, between the two sheets of glass, there is an aluminum spacer filled with desiccant. The aluminum spacer and sheets of glass are adhere
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:44:56 ]
PRODUCTION PROCESS What\'s Low-E Glass? Low emissivity coated glass is also called Low-E glass. There are two types of Low-E glass hard coat and soft coat. Hard coat Low-E glass is manufactured by pouring a thin layer of molten tin onto a sheet of glass while the glass is still s
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:43:31 ]
PRODUCTION PROCESS In the production of flat glass, the molten silica-based mix is cooled slowly under carefully controlled conditions. This annealing procedure removes undesirable stresses from the glass. Cooling occurs in an annealing \"lehr\"; and then annealed glass is heated
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:41:51 ]
PRODUCTION PROCESS In the production of flat glass, the molten silica-based mix is cooled slowly under carefully controlled conditions. This annealing procedure removes undesirable stresses from the glass. Cooling occurs in an annealing \"lehr\"; and then annealed glass is heated
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:40:47 ]
PRODUCTION PROCESS Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, etc. as our material and then sent to furnace after accurate weighting, checking and mixing, with heavy oil as fuel. They are melted into
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:40:15 ]
3 4 5 6 8mm Clear Mistlite Patterned Glass for window furniture door PRODUCTION PROCESS Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, etc. as our material and then sent to furnace after accurate weighti
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:27:09 ]
1.Specifications (1) one lamp (2)PUVA light (3)Psoriasis,vitiligo pityriasis rosea and eczema (4)Simple operation,low price (5)With CE 2.UV Phototherapy lamp (1) safe equipment for handheld home use device (2) One unit lamp for home use (3)Philips PUVA lamp (4)Psoriasis,vitiligo
Kernel Medical Equipment Co.,Ltd [2017-05-24 10:26:43 ]
PRODUCTION PROCESS Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, etc. as our material and then sent to furnace after accurate weighting, checking and mixing, with heavy oil as fuel. They are melted into
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:23:52 ]
PRODUCTION PROCESS Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, etc. as our material and then sent to furnace after accurate weighting, checking and mixing, with heavy oil as fuel. They are melted into
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:22:47 ]
PRODUCTION PROCESS Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, etc. as our material and then sent to furnace after accurate weighting, checking and mixing, with heavy oil as fuel. They are melted into
A&T INDUSTRY TRADE CO.,LTD [2017-05-24 10:21:23 ]
Description Model P054 Part Name Nozzle Used in Ipulse Machine supply All Ipulse Machine model Spare Parts, Original new inventory quantities,Original used and in stead of Spare Parts Thanks sale@jinchensmt com
Jinchen Electronic Technology Co,.Ltd [2017-05-23 18:01:28 ]
