Searching alpha:t* , total 417008 products,queries done in 48 ms

China 6x4 35KL Palm Oil Tanker with tri-axle

CIMC patent dual cross-sectionstructure,low center gravity,more safe,discharging with few residuals Modularized running system, easy to assemble and disassemble Light weight,more loading L*W*H 11200mm*2500mm*3850mm Axle base 6050mm+1310mm+1310mm Fifth wheel 1300mm Axle FUWA Kingp

CIMC VEHICLE (JIANGMEN) CO., LTD      [2018-02-13 15:24:39 ]

Factory Directly 40KL Liquid Tanker stainless steel Thermal Food Tanker

CIMC patent dual cross-sectionstructure,low center gravity,more safe,discharging with few residuals Modularized running system, easy to assemble and disassemble Light weight,more loading Adopting all-cover heat preservation barrel structure to reach the best effect of heat preser

CIMC VEHICLE (JIANGMEN) CO., LTD      [2018-02-13 15:24:08 ]

46KL Liquid Tanker Aluminum Alloy Fuel Tanker manufacturer

CIMC patent dual cross-sectionstructure,low center gravity,more safe,discharging with few residuals Modularized running system, easy to assemble and disassemble Light weight,more loading L*W*H 12350mm*2500mm*3850mm Axle BPW/FUWA Kingpin JOST Langing leg FUWA/JOST/SAF-HOLLAND Tire

CIMC VEHICLE (JIANGMEN) CO., LTD      [2018-02-13 15:23:30 ]

NEW type 48.5cbm Dry Bulk Tanker with quadri-axle

Advanced running system Discharging fast with few residuals Reliable quality Shot blasting,Aesthetic appearance L*W*H 11640mm*2500mm*3950mm Axle base 6150mm+1310mm+1310mm+1310mm Fifth wheel 1350mm Surplus rate less than or equal 0.3 Axle FUWA Kingpin JOST Langing leg FUWA Tire DO

CIMC VEHICLE (JIANGMEN) CO., LTD      [2018-02-13 15:20:52 ]

Philippines 28cbm Dry Bulk Tanker with dual-axle supplier

Advanced running system Discharging fast with few residuals Reliable quality Shot blasting,Aesthetic appearance L*W*H 8400mm*2500mm*3650mm Axle base 5740mm+1310mm Fifth wheel 1320mm Surplus rate less than or equal 0.3 Axle BPW Kingpin JOST Langing leg JOST Tire DOUBLE COIN 295/80

CIMC VEHICLE (JIANGMEN) CO., LTD      [2018-02-13 15:18:25 ]

hot sell V shape 30cbm Dry Bulk Tanker with tri-axle

Advanced running system Discharging fast with few residuals Reliable quality Shot blasting,Aesthetic appearance L*W*H 9800mm*2500mm*3600mm Axle base 5700mm+1350mm+1350mm Fifth wheel 1300mm Surplus rate less than or equal 0.3 Axle FUWA Kingpin JOST Langing leg JOST Tire DOUBLE COI

CIMC VEHICLE (JIANGMEN) CO., LTD      [2018-02-13 15:17:50 ]

High quality W-shape 32cbm tri-axle Dry Bulk Tanker with air compressor

Advanced running system Discharging fast with few residuals Reliable quality Shot blasting,Aesthetic appearance L*W*H 12100mm*2500mm*3400mm Axle base 8010mm+1310mm+1310mm Surplus rate less than or equal 0.3 Axle KH Kingpin JOST Langing leg SAF-HOLLAND Tire LINGLONG 10.00R20-18PR

CIMC VEHICLE (JIANGMEN) CO., LTD      [2018-02-13 15:17:06 ]

Wire coil Winding/shaping/Taping Machine

1.Distance of disc. center from floor 1210mm. 2.Disc. dia. Ф560mm. 3.Max. pitch of strand 600kg , max. torque (8r/m)6000Nm, min. wrest torque(40r/m) 2500Nm. 4.Max. load 650kg. 5.4 kinds of speed range 0-8, 0-16, 0-20, 0-40r/m. 6.Each speed starts from 0r/m steplessly tor

Beijing Holland Co.,Ltd.      [2018-02-12 17:00:14 ]

Paper board Insulator Machine for transformers

The paperboard insulator processing center is used to mill/cut/machine/process insulating plates into any shape. It is NC machining equipment for processing insulators, laminated wood board and paper board of big type transformers. It has function of automatic change tool and vac

Beijing Holland Co.,Ltd.      [2018-02-12 16:59:08 ]

Transformer Paper board Insulator processing Machine

The paperboard insulator processing center is used to mill/cut/machine/process insulating plates into any shape. It is NC machining equipment for processing insulators, laminated wood board and paper board of big type transformers. It has function of automatic change tool and vac

Beijing Holland Co.,Ltd.      [2018-02-12 16:57:59 ]

Automatic Paper board machine for transformers

The paperboard sawing machine is used to slit insulating paperboard/cardboard, plywood and phenol aldehyde laminated cloth board into a strip at preset width value via a saw. It is controlled by PLC and fed automatically; any width can be slit at the set value. After clamping the

Beijing Holland Co.,Ltd.      [2018-02-12 16:56:52 ]

Automatic coil Winding Machine for transformers

1.Distance of disc. center from floor 1210mm. 2.Disc. dia. Ф560mm. 3.Max. pitch of strand 600kg , max. torque (8r/m)6000Nm, min. wrest torque(40r/m) 2500Nm. 4.Max. load 650kg. 5.4 kinds of speed range 0-8, 0-16, 0-20, 0-40r/m. 6.Each speed starts from 0r/m steplessly tor

Beijing Holland Co.,Ltd.      [2018-02-12 16:55:50 ]

Transformer horizontal wire coil winding machines

It mainly consists of automatic dereeler, main winding machine and control system etc. The wire coil winding machine is used to wind the wire or conductor on the iron core into a coil. This machine is special, it can realize to wind the wire or conductor on the iron core directly

Beijing Holland Co.,Ltd.      [2018-02-12 16:54:19 ]

Transformer over floor vertical winding machine

The over floor vertical winding machine is used to make transformer coils. It is especially for power electric transformers. One or multiple flat wire conductors in parallel are wound on the winding mandrel via the wire dereelers, and then the winding coil is obtained as winding

Beijing Holland Co.,Ltd.      [2018-02-12 16:53:06 ]

LV foil winding machine for transformers

LV foil winding machines, which are requisite for dry and oil type transformers as well reactor and amorphous alloy coils production. The LV foil winding machines are used to wind LV coils with Al or copper foil strip for distribution transformer. Generally one foil or two overla

Beijing Holland Co.,Ltd.      [2018-02-12 16:51:58 ]

Transformer HV foil Winding Machine

The HV foil winding machine is used to wind high voltage coils for cast resin encapsulated transformers with Al or Cu foil strips. The individual Al or Cu foil discs are wound on the prepared casting mould separately and continuously via a sliding device. Total turns, segment tur

Beijing Holland Co.,Ltd.      [2018-02-12 16:50:49 ]

LOI Limited Oxygen Index Tester ISO 4589-2

Introduction LOI(Limited Oxygen Index tester) measures minimum oxygen concentration as necessary when specimen combustion. This equipment\'s the oxygen analyser is adapted Paramagnetic Type which has a precise, long life, less error rate and high reliability. TOI (Temperature Oxy

chongqing gold co ltd      [2018-02-12 13:54:28 ]

Combustibility Tester of Building Material ISO11925

Introduction this instrument is designed according to ISO11925-2, it is used to test building material under conditions in the absence of external radiation to direct impact of vertically placed samples with a small flame to determine the flammability of building products. Intern

chongqing gold co ltd      [2018-02-12 13:35:34 ]

super seal plastic containers plastic seal tag tanker seal

super seal plastic containers plastic seal tag tanker seal Model YTPS006 Material PP&PE;stainless steel pin Color Yellow/Red/Green/Blue/Purple etc Imprinting Laser engraving/Hot stamping Custom ordered Numbering, logo, barcode Standard Packaging 100pcs/bag 25 bags/carton Features

Shandong Yutong Commercial Trading Co., Ltd.      [2018-02-12 13:18:56 ]

Single Cable Flame Spread Tester EN50086

Introduction Single wire and cable vertical burning tester is themost widely used and low cost of cable fire performance test equipment; single wire or cable burning tester meet the national standard GB /T18380.11-2008 / IEC60332-1-1 2004 requiremen. It is to test cable , flamere

chongqing gold co ltd      [2018-02-12 11:58:24 ]