Searching alpha:p* , total 621526 products,queries done in 91 ms

pas 30pin cable auto diagnostic tool

We can custom all kinds of obd cable and obd connector as your requirement. Skype tingen shi QQ 2229223179 Fectures -Materials of connector and cable comply with UL and Rohs standards -Technology process cutting,welding,molding,assembly and testing -Customizable specifications

Aotai Industry Co., Limited      [2014-05-28 04:17:40 ]

Screw Shank Roofing Nails - Greatest Holding Power

Introduction Screw/Spiral shank roofing nails have a screw shank and a diamond point. They are used to securely fasten wood roofs. They are popular because of their strong holding power. They are commonly used for building rafters, attaching wood or vinyl siding, or securing hard

http://www.roofingnails.net      [2014-05-27 22:47:09 ]

Ring Shank Roofing Nails - 40% More Holding Power

Introduction Ring shank roofing nails, sometimes called deformed shank roofing nails, are nails with ridges or grooves along the shank, so it is easy for holding shingles in place. They can made of galvanized, copper, stainless steel and aluminum. They are perfect for nailing rid

http://www.roofingnails.net      [2014-05-27 22:46:48 ]

Plastic Cap Roofing Nails - Small Body, Big Use

Introduction Plastic cap roofing nails with different colors Plastic cap roofing nails are galvanized nails with plastic caps. They are inserted through a plastic disk to increase holding power. They have the ring shank they can made of high carbon steel. The color is various. Sp

http://www.roofingnails.net      [2014-05-27 22:44:44 ]

Copper Roofing Nails - Used in High Pollution Areas

Introduction Different kinds of copper roofing nails Copper roofing nails also called copper clout nails or slating nails. They are made of high quality copper. They have a large head, smooth shank or ring shank and diamond point. It mainly used in the copper roofs. Feature Used

http://www.roofingnails.net      [2014-05-27 22:44:18 ]

http://www.roofingnails.net/product/roofing-nails.html

Various types of roofing nails Introduction Roofing nails also called clout nails are usually used in the roof. They can made of low carbon steel wire, copper, aluminum, stainless steel and so on. They have different finish, to fit the customers’ requirements. Specification Mat

http://www.roofingnails.net      [2014-05-27 22:42:39 ]

EVI(-25℃) heat pump

1.safety water and electric separately 2.hot water(55 ℃ ) be provide constantly enven ambinet temperature down to -25 ℃ 3.convenient intelligent microprocessor with touch screen display Trouble shoot shows on display board automatically 4.Auxiliary electric heater,insulation

Guangdong Xingfeng Refrigeration Equipment Co.,Ltd      [2014-05-27 22:15:04 ]

KYB Self-Priming Vane Pump

Description For diesel oil,Kerosene,gasoline , benzene and other clean ,light oily liquid Vane pump,large output output with small power input ,Cast iron pump casing ,completely bronze vanes,electric motor or diesel engine driven for option . Bypas valve built in,with inner fitte

ZHEJIANG JIASONG TECHNOLOGY CO.,LTD      [2014-05-27 22:09:17 ]

QYB Submersible Pump

Compact structure, easy installation and maintenance, low noise, smooth operation, long service life. Built-in check valve, switching valve, safety valve(relief valve) and vacuum valve. The submersible pump can take several nozzles to work at the same time. It is applicable to ga

ZHEJIANG JIASONG TECHNOLOGY CO.,LTD      [2014-05-27 22:08:43 ]

KCB Gear Pump

KCB Gear Oil Pump with large output,suitable for different oily liquid transter which is without solid ,with viscosity of 5-1500C s.t,at temperature below 300℃。Such as crude oil ,diesel oil,lubricant oil,animal and vegetable oil etc. It’s also available for transferning gas

ZHEJIANG JIASONG TECHNOLOGY CO.,LTD      [2014-05-27 22:08:16 ]

YB Sliding Vane Pump

YB series Sliding vane pump is with by-pass valve built-in. The pump uses a rotor with sliding vanes to drive the liquid transfer. The material of construction is nodular cast iron with self-lubricating vanes. Due to its superior performance, the pump can handle viscous and volat

ZHEJIANG JIASONG TECHNOLOGY CO.,LTD      [2014-05-27 22:07:18 ]

DB Series LPG Pump

DB-65 multistage pump is a centrifugal pump, which adopts horizontal structure of 6 classes. And the shaft adopts mechanical seal without cooling. The pump is used for transferring LPG, especially it is high differential pressure, low NPSH and the gas of LPG up to 50% when pumpin

ZHEJIANG JIASONG TECHNOLOGY CO.,LTD      [2014-05-27 22:06:27 ]

CP5 Pump and JSJ4 Meter

PUMP CP5 Gear Pump, whose material of bady is alloy aluminum founded under low pressure, is applicable to gasoline, kerosene , diesel oil and compound of them, Air separator, by pass valve, check valve, inlet and outlet strainer, relief valve are built in METER JSJ4, JSJ4A, JSJ4B

ZHEJIANG JIASONG TECHNOLOGY CO.,LTD      [2014-05-27 22:03:47 ]

LWB Series LPG Pump

A cost effective alternative to submersible designs. Meeting multiple demands for LPG application Whether a low or high flow rate with a high differential pressure,by underground and aboveground tank application ,LWB-150 pump is an idea pump for two dual hose LPG dispensers. http

ZHEJIANG JIASONG TECHNOLOGY CO.,LTD      [2014-05-27 22:03:21 ]

SM Positive Displacement Vane Meter

Stepless adjusting mechanism allow a micro adjustment of the meter; Special designed Manifold in line separates from measuring chamber to avoid stress coming from the installation; Low pressure loss; Simple construction Rotor - blades for easy and low maintenance cost; Wearing c

ZHEJIANG JIASONG TECHNOLOGY CO.,LTD      [2014-05-27 22:02:52 ]

CP2 Pump and JSJ3 Meter

PUMP CP2 gear pump with cast iron body is applicable to gasoline, kerosene, diesel and gasohol. There are type A and type B inlets of the pump. Air separator, by-pass valve, check valve, outlet valve and inlet filter are built-in. METER JSJ3 flowmeter with cast iron body and nodu

ZHEJIANG JIASONG TECHNOLOGY CO.,LTD      [2014-05-27 22:02:25 ]

LPG Dispenser and Parts

LPG dispenser, LPG flow meters, LPG dispenser flow meters, Characteristic 8 digits display with bright backlight. 4-piston based flowmeter with magnetic coupling connection,eliminate the possible leakage. All circuits install in anti-explosion box with advanced explosion proof de

ZHEJIANG JIASONG TECHNOLOGY CO.,LTD      [2014-05-27 22:01:27 ]

TCS Positive Displacement Flowmeter

TCS Positive displacement flowmeter, positive displacement flow meters, positive displacement vane flow meters, Characteristic Excellent stepless fine-tuning device allows plus-minus calibration of flowmeter; High accuracy and repeatability within the large range of flow;superior

ZHEJIANG JIASONG TECHNOLOGY CO.,LTD      [2014-05-27 22:00:54 ]

CP1 Pump and JSJ2 Meter

PUMP CP1, CP1A, CP1B combination pumps for fuel dispenser can also be used to transfer other gas-liquid mixture with the function of separation the air from gasoline, kerosene, diesel, etc.. The pump is a collection of pumping, separation and transmission with advantage of reason

ZHEJIANG JIASONG TECHNOLOGY CO.,LTD      [2014-05-27 22:00:13 ]

all in one heat pump

1.safety water and electric separately 2.hot water(55 ℃ ) be provide directly and constantly 3.convenient intelligent microprocessor with touch screen display Trouble shoot shows on display board automatically 4.world famous brand compressor,4-way valve,motor,PCB,heat exchanger

Guangdong Xingfeng Refrigeration Equipment Co.,Ltd      [2014-05-27 20:13:33 ]