1. Product Description Vacuum degasser is adapted to get rid of various cut-in-gases in the drilling fluids. Vacuum degasser is very important for returning mud gravity, stabilizing mud viscosity and reducing drilling cost. Therefore, it works as one type mud cleaning equipment.
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-18 17:40:57 ]
1. Product Description Sludge vacuum pump, also named as solids transfer pump. It is a type of pneumatic pump that sucks the material with vacuum produced by air operation, and then converts to positive pressure for discharging. Most of the solids, sludge and liquid could be tran
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-17 11:54:45 ]
1. Product Description A mud cleaner is a combination of desanders and/or desilters mounted over a shaker with a fine mesh screen. A mud is fed to the inlet of the hydrocyclone (desander and/or desilter) to separate particles and the underflow passes to the fine screen mesh where
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-17 11:46:11 ]
1. Product Description Lake MA series mud agitator is part of the drilling fluids solids control equipment, which is mainly used to agitate and mix the drilling mud to prevent solids particles from depositing in the circulating tank and to stabilize the performance of drilling fl
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-17 11:38:43 ]
1. Product Description The desander with underflow shaker is also called mini desander cleaner which is applicable for both weighted and unweighted drilling mud, while traditional desander no underflow vibrating screen only for unweighted drilling fluids. And comparing with large
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-17 11:33:25 ]
1. Product Description The desander with underflow shaker is also called mini desander cleaner which is applicable for both weighted and unweighted drilling mud, while traditional desander no underflow vibrating screen only for unweighted drilling fluids. And comparing with large
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-17 11:27:39 ]
1. Product Description The basic principle of the hydro cyclone is to separate the two-phase or multi-phase mixture of liquid-liquid, liquid-solid, liquid-gas and so on with a certain density under the action of centrifugal force. The mixed liquid is tangentially flowed into the
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-17 11:19:58 ]
1. Product Description Centrifuge is the premium centrifuge with the best material configuration. It is the best option for middle term and long term investment because of its reliability and working life. This series of decanter centrifuge are popular for the drilling waste mana
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-17 11:11:41 ]
1. Product Description All products will be made according to API and related international standard as per customer’s requirements. NJQ Series Mud Gun is a bottom type mud gun, the mud guns are meant to provide supplemental or primary mixing in mud tanks depending on the numbe
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-15 14:58:01 ]
1. Product Description The mud gate valve, with superior design features precision workmanship an a proven principle are engineered to meet the harsh drilling requirements in today’s oilfield The valve conforms to the standard flange dimensions and pressure rating of 3000 psi a
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-15 14:49:06 ]
1. Product Description Check valve creates the metal-to-metal seal by the pressure of the medium, the more the pressure is, the better the sealing effect is. Anytime the valve chamber can bear the pressure of the pipeline. The sealing face between valve core and valve body is wel
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-15 14:42:35 ]
1. Product Description Weld long spacer spool and raiser spool can be customized according to customer’s requirement. Spacer spool, in accordance with API 6A, have end connectors of the same size, rated working pressure and design. Spacer spool is wellhead sections which have n
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-15 14:34:12 ]
1. Product Description All products will be made according to API and related international standard as per customer’s requirements. The crossover flange can be applied in various connections for various casing head, BOP, tubing head, X-mass tree. It conforms to API 6A and 16C,
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-15 14:27:09 ]
1. Product Description Gate Valve is used to open or close the pipeline. According to the structure, the gate valves is distributed into rising or non-rising stem gate valve. According to the mode of operation, it is distributed into manual or hydraulic etc. The gate valve is use
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-15 14:21:34 ]
1. Product Description Gate Valve is used to open or close the pipeline. According to the structure, the gate valves is distributed into rising or non-rising stem gate valve. According to the mode of operation, it is distributed into manual or hydraulic etc. The gate valve is use
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-15 13:48:42 ]
1. Product Description Gate Valve is used to open or close the pipeline. According to the structure, the gate valves is distributed into rising or non-rising stem gate valve. According to the mode of operation, it is distributed into manual or hydraulic etc. The gate valve is use
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-15 11:41:38 ]
The balls are made of carbon steel Available diameters 20mm–40mm–50mm- 60mm-80mm-100mm-120mm-150mm , (1\" to 6\"),Hardness range 59 – 63 HRC Dimensional deviation ±2 to 3 %. Specialized in Precision Casting and Forging Ball Grinding Media Fields| Suizhou Gaincin Machinery
Suizhou Gaincin Machinery Co.,Ltd [2019-06-15 09:07:25 ]
1. Product Description The casing head, a component connecting the casing to the wellhead assembly of various types and sizes, is used to support the both the intermediate (protective) string and the production string, and to seal up the annular space between the casings, thus pr
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-14 10:37:15 ]
1. Product Description Studded tees and crosses are very important components for wellhead assembly christmas tree. They are assembled on the X-max tree where an angled connection is required. They are made from solid metal block. Boundary dimensions-bore and centerline-to-face d
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-14 10:30:53 ]
1. Product Description Drilling Spool is the parts which are often used in the oilfield for well head extension, choke and kill manifold, etc. It is designed and manufactured is accordance with API 6A and API 17K standard, it usually has the same nominal end connections. Eternal
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-14 10:24:31 ]
