1746-A13 1746-A13 ZhongHaiDe (Fujian) Industrial Equipment Co., Ltd., which is a well-developed equipment supplier in the field of automation in China currently. Our company has been established for 4 years, located in a rapidly developing coastal city named Fuzhou. Our business
zhonghaide(fujian)industrial equipmentCO.,LTD. [2019-09-11 17:14:51 ]
WLRS1010-Z desktop heat shrinkable tube heater, small size, light weight, can be placed on the worktable, suitable for processing a variety of wire harness, short wire harness, large diameter wire harness, extra-long wire harness, terminal wire harness, etc., 24 hours of continuo
Baoding Zhonghe Machinery Manufacturing Co., Ltd [2019-09-11 16:29:03 ]
This Medical Face Mask flammability Tester is mainly used to test the flame retardant performance of medical masks. The combustion performance of the mask is measured through a head mold wearing a mask device to contact with the flame at a certain linear speed. The device is main
Qinsun Instruments (Shanghai) Co., Ltd. [2019-09-06 11:57:43 ]
Standards： GB/T7742, FZ/T60019, ISO 13938.2, NEXT TEST METHOD 22 2006 ,WOOLMARK TM29 2000,EDANA 80.3-99,ISO 2758,ASTMD 3786,JISL108 Scope of application Digital bursting strength tester is used for the detection of woven, knitted, non-woven fabrics, paper or board about the bur
Qinsun Instruments (Shanghai) Co., Ltd. [2019-09-06 11:38:52 ]
Brief Introduction： By softness value of the test material and objective evaluation of its feeling (touch) performance for softness test fabrics, textiles, non-woven, sanitary paper, leather and other sheet-like soft material. At the same time, the use of different accessories,
Qinsun Instruments (Shanghai) Co., Ltd. [2019-09-06 11:15:19 ]
Product Description ESD61000-2 ESD Tester for Testing LEDs, LED Display and LCD TV According to IEC/EN61000-4-2 Standard with Maximum 30KV Output Introduction ESD61000-2 Electrostatic Discharge Simulator they equipped with an infrared remote control allow you do the test in some
Lisun Electronics Inc. [2019-09-04 16:43:52 ]
Product Description WT2080 LED Power Driver Test Instrument is the comprehensive test instrument for LED drive power which is according to GB/T 24825-2009 and IEC 62384 2006. It can measure the following parameters Input Characteristics Test (AC&DC), Output Characteristics Test (
Lisun Electronics Inc. [2019-09-04 16:41:23 ]
Product Description LVD-100KG vertical & horizontal tester to do electrodynamic vibration measurement comply with IEC standards introduction LVD-100KG Electrodynamic Vibration Generator System is complied with GB2423, IEC68-2-6, JJG189-97, GB/T13309-91 etc. Full-function computer
Lisun Electronics Inc. [2019-09-04 16:39:03 ]
Product Description The Salt Spray Test Machine Model Work Room Size (mm) Exterior Size (mm) Voltage Power (KW) YWX/Q-150 600x450x400 1100x750x930 1Phase/220V 2.5 YWX/Q-250 900x600x500 1500x900x1150 1Phase/220V 3.5 YWX/Q-750 1100x750x500 1700x1050x1150 1Phase/220V 4.5 YWX/Q-010 1
Lisun Electronics Inc. [2019-09-04 16:36:41 ]
Product Description The Dustproof Test Chamber SC-015 is according to IEC60529, GB2423.37-89 (Test L dust test methods), GB 4208-93 protective casing grade (IP code), GB/T 4942.2-93(protective casing grade of low-voltage apparatus), GB 7000.1-1996, GB 7001-1986(protective casing
Lisun Electronics Inc. [2019-09-04 16:33:55 ]
Product Description JL-X waterproof test system is according to IEC60529, IEC60598, IEC60335 and IEC 60034-5 2000. The JL-X includes the following test grades IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 of IEC60529). It is widely used in the authentication
Lisun Electronics Inc. [2019-09-04 16:31:06 ]
Product Description It is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2). It is used to test the CFL/LED which meets IES LM-80-08, electricity products, electronic components, material and so on. Specification •The chamber is produced by SUS304 Steel, the
Lisun Electronics Inc. [2019-09-04 16:28:28 ]
Product Description The LS9955/LS9956 Automatic Safety Test System is according to GB4706.1, IEC/EN60335-1, UL60335, GB7000, IEC60598, GB4943, IEC60950 and GB9706.1. It used for luminaries, home application and motor tools safety test in production line or Lab R&D. Specification
Lisun Electronics Inc. [2019-09-04 16:25:43 ]
Product Description EMI-9KB is an automatic EMI receiver system. It is a main test system for EMI (Electro Magnetic Interference) testing. The EMI-9KB is produced by the full closure structure and strong electro-conductibility material, which has high shielding effect. Due to the
Lisun Electronics Inc. [2019-09-04 16:21:38 ]
Product Description LMS-6000 High precision portable spectroradiometer lux meter and chroma color meter for led lighting products measurement 1. Spectral platform telephoto asymmetrical crossed CT system. 2. Wavelength range 380~780nm(300~950nm), FWHM 2nm, Spectral resolution 0.2
Lisun Electronics Inc. [2019-09-04 16:07:46 ]
Product Description LPCE-3 is a CCD Spectroradiometer Integrating Sphere Compact System for LED Testing. It is suitable for photometric and colorimetric measurement of luminaries such as LEDs, LED luminaires, Energy-saving lamps, Fluorescent lamps, HID lamps (high voltage sodium
Lisun Electronics Inc. [2019-09-04 16:01:42 ]
Product Description Meter Lumen - LPCE-2(LMS-9000A) High Precision luminous flux color temperature testing equipment for LED lamps LPCE-2(LMS-9000) Integrating Sphere Spectrophotometer System is high precision CCD Spectroradiometer & Integrating Sphere Test System, it is suitable
Lisun Electronics Inc. [2019-09-04 15:55:54 ]
Product Description LSG-1800BCCD Goniospectroradiometer is high precision automatic goniophotometric instrument for luminous intensity distribution measurements with facility for turning the light source. The LSG-1800BCCD can do the spatial CCT test when do the intensity distribu
Lisun Electronics Inc. [2019-09-04 15:51:46 ]
Product Description LSG-5000 Moving Detector Goniophotometer completely meets LM-79 Clause 9.3.1 and EN13032-1 clause 6.1.1.3 goniophotometer type 4 requirements. The LSG-5000 is an automatic light distribution intensity 3D curve testing system for measuring light. The measuring
Lisun Electronics Inc. [2019-09-04 15:48:29 ]
Attn Tiffany Guan Skype dddemi33 E-mail sales@askplc com Whatsapp/Wechat +86 18030235313 ABB DAPC100 3ASC25H203 ABB DAPC100 3ASC25H203 ABB DAPC100 3ASC25H203 Payment T/T Place of Origin Xiamen China Minimum Order Quantity 1pcs Lead time 3-5working days ●Place of Origin ●Br
ASKPLC LIMITED [2019-09-03 11:43:29 ]
