Searching valve body , total 835 products,queries done in 92 ms

FC flat gate valve

Overview Zhengguang’s FC flat gate valve is a single gate,full-bore ,through conduit gate valve. It is in application of 2000-15000psi, is available in sizes between 1 - 13 /16” and 5 -1/ 8 ” , with either double flange, threaded end and special connection configuration and

Deyang Zhengguang Mechanical and Electrical Equipment Co.,Ltd.      [2015-08-10 11:34:23 ]

DP27 FlangedPilot Operated Pressure Reducing Valve

DP27 Pilot Operated Pressure Reducing Valve DP27 Pilot Operated Pressure Reducing Valve DP27 Pilot Operated Pressure Reducing Valve DP27 pilot operated pressure reducing valve Pressure Rating 1.6- 2.5Mpa Specification DN15-50 Material Steel WCB Standard flanges DIN, ANSI, JIS DP2

China Yongjia Goole Valve Co.,Ltd      [2015-08-01 13:46:15 ]

DP17 pilot operated pressure reducing valve

DP27 Pilot Operated Pressure Reducing Valve DP17/DP27/DP143 Type PRV are all Pilot Operated Diaphragm Type Pressure Reducing Valve DP17 pilot operated pressure reducing valve Product DP17 pilot operated pressure reducing valve Pressure Rating 1.6- 2.5Mpa Specification DN15-50 Mat

China Yongjia Goole Valve Co.,Ltd      [2015-07-23 14:40:48 ]

pressure control valve pdf Pressure Control Valve

Pressure set points from 0.05 to 28 bar (0.75 to 400 psi) · Suitable for liquids, gases and vapors up to 350 °C (600 °F) Special features » Low-maintenance, medium-controlled proportional regulators requiring no auxiliary energy » Frictionless plug stem seal with stainless s

Vatac Valves (Quzhou) Corp      [2015-07-03 10:03:24 ]

TD42 Thermodynamic Steam trap

LINK TD42 Thermodynamic Steam trap TD42 Thermodynamic Steam trap TD42 thermodynamic steam trap Pressure Rating 1.6- 6.4Mpa Specification DN15-50 Material cast steel Standard screwed NPT TD42 Thermodynamic Steam Trap Structural characteristic 1.Assembled with steam or air heat pre

China Yongjia Goole Valve Co.,Ltd      [2015-06-27 09:21:52 ]

Y14H/F direct acting bellows pressure reducing valve

Y14H/F direct acting bellows pressure reducing valve Y14H/F direct acting bellows pressure reducing valve Y14H/F direct acting bellows pressure reducing valve Direct Acting Bellows Pressure Reducing Valve Structural characteristic and purpose Pressure Rating 1.6- 2.5Mpa Specifica

China Yongjia Goole Valve Co.,Ltd      [2015-06-23 09:41:30 ]

Free Ball float Steam Trap

LINK Free Ball float Steam Trap Free Ball float Steam Trap Free Ball Float Steam Trap Application By automation, speediness and continuing features, this valve is used for the steam heating equipment, condensation water recovery system and the place where needs removing condensat

China Yongjia Goole Valve Co.,Ltd      [2015-06-10 09:16:37 ]

DI Centerline Butterfly Valve, Grooved

Keywords Grooved Ends Butterfly Valve . Type Grooved Ends Butterfly Valve. Body Ductile Iron. Disc Ductile Iron+EPDM. Stem SS416. Size 2 Inch (DN50).

China Landee Industrial Valve Co., Ltd      [2015-06-05 09:46:20 ]

Check Valve Diaphragm Type Check Valve

The Diaphragm Type Water Hammer Preventive Check Valve comprises valve body, disc and guide chamber. The valve body is made of ggg50 ductile iron, which provides strength and durability. The EPDM rubber encapsulated disc with the strengthening nylon ensures maximum corrosion resi

China Fagong Valve Co.,Ltd.      [2015-05-29 09:29:28 ]

Ball Valve floating ball valve

Product Type Ball Valve Product Name 3-PC Body Floating Ball Valve Product Details Place of Origin China Certification ISO9001-CE Product Description For the purpose of preventing the stem from flying off resulting in abnormal rising of the inner pressure of valve,shoulder is fix

China Fagong Valve Co.,Ltd.      [2015-05-29 09:27:46 ]

Ball Valve Straight through Ball Valve

Straight Through Ball Valve. Ball valves ranges in sizes up to 2 inch. Normally come in single piece, two or three piece designs. One piece ball valves are almost always reduced bore, are relatively inexpensive and generally are throw-away. Two piece ball valves are generally sli

China Fagong Valve Co.,Ltd.      [2015-05-29 09:26:48 ]

FT14 ball float steam trap (Threaded)

FT14 ball float steam trap (Threaded) Quick Details for FT14 Ball Float Steam Trap Standard or Nonstandard Standard Pressure PN16~40 Power Manual Material Casting Temperature of Media -196?~600? Media W O.G Port Size DN15~400 Place of Origin Zhejiang, China (Mainland) Brand Name

China Yongjia Goole Valve Co.,Ltd      [2015-05-23 15:57:11 ]

DP27 pilot operated pressure reducing valve

DP17 pilot operated pressure reducing valve DP27 Pilot Operated Pressure Reducing Valve DP17/27 pilot operated pressure reducing valve Pressure Rating 1.6- 2.5Mpa Specification DN15-50 Material Steel WCB Standard flanges DIN, ANSI, JIS DP27 Pilot operated pressure reducing valve

China Yongjia Goole Valve Co.,Ltd      [2015-05-23 14:56:18 ]

PZ 73 Maunual Knife Gate Valve

PZ73 Manual Knife Gate Valve This knife gate valve with rising stem is a manually controlled device. It could only be used to open or stop the flow but regulating the flow rate. Materials for Manual Knife Gate Valve with Rising Stem Valve body and cover Carbon steel, stainless st

Shijiazhuang Damei Kingmech Pump Co.,ltd      [2015-05-15 18:54:44 ]

Pneumatic Vent Butterfly Valves

Vent Pneumatic Butterfly Valves , made of steel plate through welding, has the advantages of small size, light weight, convenient utilization. For small torque, it is easy to open or close the valve. Body has oil seal retainer. There is large expansion clearance between the disc

Zhejiang Xinhai Valve Manufacturing Co., Ltd.      [2015-04-27 11:57:04 ]

Cast Iron Parts

Cast Iron Valve Body We can develop OEM valves, pump and other casting part according to customer's drawings or sample. Material cast iron, ductile iron. GG25, GGG40, ASTM A126 , HT250 Melting equipment Electrical furnace Molding process Green sand casting, Resin sand casting

Hebei Xinghai Valve Co.,Ltd      [2015-04-24 10:43:04 ]

Funnel Knife Gate Valve

Funnel Knife Gate Valve is used in service as a pneumatic residue discharge valve in pulp making, paper making and sewage treatment. This type of valve is well suited for high consistency media containing solids, fiber or residue, serving as a residue discharge valve on stock cle

Zhejiang Linuo Flow Control Technology Co., Ltd      [2015-04-13 15:53:35 ]

Floating Ball Valve

Floating Ball Valve is in two-piece body, floating ball and end entry design. Two pieces valve body are bolted by flange. It is designed as per API 608 and fire tested as per API 607. Sealing materials available for various pressure and temperature ranges are Teflon, PPL, Peek, D

Zhejiang Linuo Flow Control Technology Co., Ltd      [2015-04-13 15:49:30 ]

Manual Straight Through Ball Valve

Straight Through Ball Valve. Ball valves ranges in sizes up to 2 inch. Normally come in single piece, two or three piece designs. One piece ball valves are almost always reduced bore, are relatively inexpensive and generally are throw-away. Two piece ball valves are generally sli

China Fagong Valve Co.,Ltd      [2015-03-25 09:15:21 ]

3-PC Body Floating Ball Valve

Product Type Ball Valve Product Name 3-PC Body Floating Ball Valve Product Details Place of Origin China Certification ISO9001-CE Product Description For the purpose of preventing the stem from flying off resulting in abnormal rising of the inner pressure of valve,shoulder is fix

China Fagong Valve Co.,Ltd      [2015-03-25 09:13:59 ]