Before The Curing
Performance Indicators | A | B |
Appearance | Gray Fluid | White Fluid |
Viscosity | 1500~2500(cps) | 1500~2500(cps) |
A:B | 1:1 | |
Mixed Viscosity | 1500~2500(cps) | |
Operable Time | 30~120(min) (Adjustable) | |
Curing Time | 3~5(h) |
After The Curing
Hardness | 40~50(Shore A) |
Dielectric Strength | ≥20(kV/mm) |
Dielectric Constant | 3.12(1.2MHz) |
Thermal Conductivity | ≥0.6[W/m.k] |
Volume Resistivity | ≥1.0×1014(Ω·cm) |
Specific Gravity | 1.56±0.02(g/cm3) |
Flammability Rating | UL94 V-0 |
•20kg/set(A10kg+B10kg), packaging with bucket.
NOTE
1,The mixture should be sealed and stored in a dry environment at room temperature, and should be used as soon as possible, to avoid wastage.
2,The product don’t belong to dangerous goods, but avoid contacting skin and eyes.
3,The product is non-toxic, has good physical inertia without stimulation and harm. The product does not contain flammable and explosive ingredients which will not cause fire or explosion without special requirement for transport.
4,Stored for a period of time, the plastic may be layered. So please stir well before using, and can’t affect its performance.
5,The following substances may hinder the curing or cause the phenomenon of not cure, so it is used after simple experiments, and need to clean the site of application if necessary.
A, incompletely cured condensation type silicone rubber.
B.amine (amine) curable epoxy resin.
C. ash welding (solder-flux).
Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500~2500(cps) 1500~2500(cps) A:B 1:1 Mixed Viscosity 1500~2500(cps) Operable Time 30~120(min) (Adjustable) Curing Time 3~5(h) After The Curing Hardness 40~50(Shore A) ...
Features and applications of Anti-yellow Electronic potting compound addition silicon for solar(PV) panels It is a kind of low viscosity, Inherent flame resistance, two components addition cured potting silicone with heat-conducting. It cures with both on room temperature and ...