Excellent adhesiveness silicone sealant for power supply
Product Quick Detail
- FOB Price
- USD $9.00 / Piece
- Place Of Origin
- China (Mainland)
- Minimum Order
- 1
- Packaging
- N/A
- Delivery
- 15 Days
Specifications
PRODUCTION CHARACTERISTICS
| Can be used in harsh environments for a long time The silicone sealant has the performance of superior high and low resistance, excellent insulation, high stability with thermal oxidation and ozone. It can be widely usesd in aerospace, automotive electronics, office equipment, construction and so on.
|  |
 | Effectively prolong the service life of electronic components Silicone sealant has superior thermal conduction and bonding property.it not only can fixed the electronic components, make heat transferring to the heat sink, to prevent overheating of electronic components to avoid resulting in break down, which can improve the service life. |
| Hardness | 35~45 (Shore A) |
| Tensile Strength | ≥1.0 (MPa) |
| Break Elongation | ≥50(%) |
| The Temperature Range | -60~200 (℃) |
| Volume Resistivity | ≥1.0×1014 (Ω·CM) |
| Dielectric Strength | ≥18 (kV/·mm) |
Sample: 1kg/tin (which may be decided according to user's need)
NOTE
After operating, the rest of glue must be sealed to store , and tightened the cap immediately. when using it in the next time, if there is a little crust in sealed place, to remove it and it will not affect the normal application. the process of storage , the canal orifices may appear the phenomenon of the curing, to clean it then it can be used again, and the performance of product is not affected.
- Country: China (Mainland)
- Business Type: 生产厂家
- Market:美洲,欧洲,欧洲联盟
- Founded Year:2001
- Address:
- Contact:Joe Lu
Other products from Guangzhou Usilicone chemical material Co.,Ltd
Relate products of Excellent adhesiveness silicone sealant for power supply
Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s,25℃) Cure Time 3~7(d) After the curing Relative Density 1.40~1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness ...
Appearance Translucent And Half Flow Relative Density 0.95~1.05 (g/cm3) Tack Free Time ≤90 (min) Completely Cure Time 3~7(d) After the curing Hardness 35~45 (Shore A) Tensile Strength ≥1.0 (MPa) Break Elongation ≥50(%) The Temperature Range -60~200 (℃) ...
