single component adhesive with high property

FOB Price
USD $9.00 / Piece
Place Of Origin
China (Mainland)
Minimum Order
1
Packaging
N/A
Delivery
15 Days

METHOD OF OPERATION

1. Clean surface: cleaning adhesion surface and to remove the rust,dust and greasy dirt, etc.

2. After sizing: Unscrew the hose cap (or cutting), squeezing the glue on cleaned surface, so that can be distributed uniformly.

3. Curing: the part of bonded or sealed were cured naturally in the air. The curing is a process from the surface to the internal, the depth of curing is 2 ~ 4mm within 24 hours (at room temperature and 55% relative humidity), if the location of sizing is too deep, especially when it is not easy to contact the air, then the completely curing time will be extended, if the temperature is low, the curing time will be extended either, the fully curing time need at least 7 days if the thickness of sealant is 6mm.



Before The Curing

Appearance White Paste
Tack Free Time ≤10 (min)
Extrudability 5~11 (g/s,25℃)
Cure Time 3~7(d)



After the curing

Relative Density 1.40~1.45 (g/cm3)
Tensile Strength ≥2.5 (MPa)
Break Elongation ≥500 (%)
Shear Strength ≥2.0 (MPa)
Hardness 45~55 (Shore A)
The Temperature Range -60~200 (℃)
Volume Resistivity 2.6×1015 (Ω·CM)
Dielectric Strength 20 (kV/·mm)
Dielectric Constant 3.12
Flame Retardant Grade UL94 HB



MATTERS NEEDING ATTENTION

NOTE

After operating, the rest of glue must be sealed to store , and tightened the cap immediately. when using it in the next time, if there is a little crust in sealed place, to remove it and it will not affect the normal application. the process of storage , the canal orifices may appear the phenomenon of the curing, to clean it then it can be used again, and the performance of product is not affected.



Sample: 300mL / tube, 25tubes / box.

  • Country: China (Mainland)
  • Business Type: 生产厂家
  • Market:美洲,欧洲,欧洲联盟
  • Founded Year:2001
  • Address:
  • Contact:Joe Lu
*Your name:
*Your Email:
*To:Guangzhou Usilicone chemical material Co.,Ltd
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters : 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

submiting now We do inquire for you , please wait ...

Sepna® Brand Single Component Polyurethane Slot Filling Adhesive PU820
Sepna® Brand Single Component Polyurethane Slot Filling Adhesive PU820

Single Component Polyurethane Slot Filling Adhesive PU820 #Product Description PU820 is one component polyurethane high elastic self-leveling sealant for construction. #Key Features 1. One component, very easy for application, free solvent, non-toxic odorless after curing, ...

Shanghai Sepna Chemical Technology

Single-component Adhesive
Single-component Adhesive

Hot Tags: China single-component adhesive manufacturers, single-component adhesive suppliers, single-component adhesive factory, wholesale single-component adhesive products http://www.epdmrubbergranule.com/ ...

Jiaxing Running Rubber &Plastic Co.,Ltd