1200L/HElectric Submersible Variable speed water pump swimming pool circulation pump

Specifications：

1、Dimension:115.5mm*66.5mm*93.2mm

2、weight：650g

3、outlet dimension:20mm(1/2”thread)

4、inlet dimension:20mm(1/2”thread)

5、pump body material:PA66+30%GF

6、max. loading current：rated current±0.2

7、types of fluid:water，oil，acid-base solution（according to testing result）

8、fluid working temperature：-10-100℃(Please keep the fluid from freezing）

9、working environment temperature：-10-100℃

10、storage temperature：-10-100℃

11、noise level:<40dB（while pumping water）

12、water proof level:IP68（submersible)

13、power supply:solar panel，battery，adapter，battery module

14、life expectancy： more than 20,000 hrs

Features：

1、small size，high efficiency，long life expectancy，low noise level；

2、Ceramic shaft，Carbon graphite seal low coefficient of friction；

3、0.5% non-comformity rate < 0.5%

4、Brushless, no mechanical wear，electronic commutator，

5、The electricity and fluid are insulated from each other，sealed with epoxy，100% water proof，leakage proof；

Notice:

1、Please advice pump environmental conditions, ex. time of continuous working, water temperature and types of fluids…etc. Water Pumps with power more than 24W are not suitable for working with water temperature more than 60℃ for long time. Please contact us for the best water pump for your application.

2、The current mentioned above is the maximum current measured at pump outlet and while the pump is submersed but not connecting to any circulation system. After connecting the water pump to circulation system, the loading current will lower to 70% to 85% of max. loading current.

3、The pressure / lift of water pump means maximum height that we can pump the water at. The flow rate is zero at the maximum pressure / lift.

4、The flow rated is measured horizontally.