DSHD-267 Open Cup Flash Point Tester

A:Brief description:

DSHD-267 Open Cup Flash Point Tester is designed accordingthe National Standard GB/T267"Test Methods for Flash Point and Fire Point of Petroleum Products (Open Cup Methods)" and Industry Standard of Petrochemical SH/T0318"Technical Requirements for Open Cup Flash Point Tester".

DSHD-267 Open Cup Flash Point Tester isappliesto determine the flash point and fire point of lubricating oil and Dark petroleum products.

B:Technical parameters

1. Power supply: AC 220 V±10%,50Hz;

2. Outer crucible:

(1) Material: Carbon structural steel;

(2) Diameter of upper opening:diameter100±5 mm;

(3) Height: 50±5 mm;

(4) Diameter of bottom:diameter56±2 mm;

3. Inner crucible:

(1) Material: Carbon structural steel;

(2) Diameter of upper opening:diameter64±1 mm;

(3) Height: 47±1 mm;

(4) Diameter of bottom:diameter38±1 mm;

(5) Scale line: there is a line 12 mm away from the rim of upper opening and a line 18 mm away from the rim of upper opening.

4. Gas tube: the diameter of nozzle isdiameter0.8~diameter1 mm. The inner surface of tube is smooth and it can adjust flame to 3 to 4 mm.

5. Heater: Heated by an electric furnace. Heating power is 1000 W and adjustable.

6. Thermometer: 0~360 °C; each scale division is 1 °C. It conforms to GB/T514.

7. Ambient temperature: no more than35 °C;

8. Relative humidity: no more than85%;

9. Total power consumption: not more than 1100 W;

C:More Open Cup flash point tester:

DSHD-3536 Cleveland Open-Cup Flash Point Tester

DSHD-3536A Automatic Cleveland Open Cup Flashpoint tester

DSHD-3536A Automatic Cleveland Open Cup Flashpoint tester

DSHD-3536D Fully-automatic Cleveland Open Cup Flash Point Tester

DSHD-3536-1 Cleveland Open-Cup Flash Point Tester

DSHD-267 Open Cup Flash Point Tester