Characteristics
An exceptional fluidity and good operability, easy to demold
Good tensile and tear strength
Outstanding bubble releasing
Non-deformation
Low shrinkage
Aging resistance ,high temperature resistance (200℃)
Environmentally, food-grade
Warm tips :
1.As addition cure silicone is a kind of platinum cure system ,which will be easy to cause uncure problem ,so
Kindly follow the tips below :
Do not mix with liquid condensation silicone rubber or even the tool which used for condensation silicone
Do not mix with organic matter which contains N, S, P organics and ionic compound like Sn, As,Hg, Ph,
Do not add any pigment or powder into the addition cure silicone rubber without any testing to prevent uncure problem
Package
20KG/drum vacuum packing for part
A + 20KG/drum vacuum packing for part B
200KG/drum packing for part A +200KG/drum packing for part B
Shelf life
Twelve(12) months when stored under dry and cool place by original package under 25℃
SiSiB® HR0100 is general purpose heat cured elastomer for molding. Technical Data Product HR0130 HR0140 HR0150 Appearance Translucent Translucent Translucent Hardness (Shore A) 30+/-2 40+/-2 50+/-2 Williams Plasticity 130+/-20 160+/-20 215+/-24 Tensile Strength (MPa) Min. 4.0 ...
Model Color Mixing ratio Pot life (mins) Demouled time (hrs) Hardness(A0) Tensile-strength (kgf/cm2) Tear-strength (kgf/cm) Viscosity (cps) Elongation (%) HY-E625 translucent 1 : 1 30-60 4±1 25±2 35±2 25±2 6000±3000 ≥400 HY-E630 translucent 1 : 1 30-60 4±1 30±2 40±2 ...
HY-605 is a kind of room temperature vulcanized silicone rubber incondensationtype.It’sgenerally named astwopart silicone rubber ,Part A is a flowable liquid, part B is the curing agentor catalyst . It’s mainly used for mold making . HY-605 silicone rubberisusedformaking ...