AS510 Remote Air Quality Monitor
Product Quick Detail
- Minimum Order
- 1
- Trademark
- Atmospheric Sensors
- Place Of Origin
- United Kingdom
- Packaging
- N/A
- Delivery
- 15 Days
Specifications
AS510 remote air quality monitor
A single unit, based around a powerful 32-bit floating-point ARM microcontroller, designed to provide a complete analysis of local air quality.
The unit deploys four electrochemical sensors, an NDIR CO 2 sensor and a laser particle monitor. These combine with a temperature and relative humidity sensor, and GPS is used for accurate location
and timestamping.There is also an optional microphone to provide ambient noise information. Data is stored locally and uploaded to a central management site.
Specification
● accurate electrochemical cells (Alphasense A4) monitoring CO, NO, NO 2 , and O 3 down to ppb levels. Other gases can be sensed if required (eg SO 2 ).
● digital NDIR CO 2 sensor (Atmospheric Sensors/Alphasense or SenseAir).
● laser optical particle counter (Alphasense) to provide PM1, PM2.5 and PM10 readings.
● PID sensor for volatile organic compounds (VOCs) (Alphasense).
● temperature and relative humidity sensor (Atmospheric Sensors).
● high-sensitivity GPS module capable of accurate location and time measurement even inside buildings.
● microphone to characterise ambient noise, based on a hardware RMS level detector.
● data can be sampled at high rates, which are normally averaged over 20 seconds, with data transmission every 15 minutes. This can be configured to suit each application.
● communication link to remote database via GPRS. This includes the ability to ‘store and forward’ data in times when the network is down or temporarily overloaded. The unit requires a data-capable
SIM card service, which can be provided either by Atmospheric Sensors or by other providers by discussion.
● local storage on 16GB SDCard of extended results from test for later recovery and to act as a backup of results sent over the GPRS link.
● mains power supply, with waterproof connector.
● externally visible LED to indicate unit status.
● the unit may be used either indoors, or outdoors if protected by a Stevenson Screen, or similar enclosure. Wall mount brackets are supplied with each unit, permitting easy installation.
- Country: China (Mainland)
- Business Type: Distributor/Wholesaler
- Market:Europe, America, etc
- Founded Year:2014
- Address:sales@isweek.com
- Contact:zy
Other products from Week Technology LTD
Relate products of AS510 Remote Air Quality Monitor
4G Modbus Air Conditioning to Modbus Remote Monitoring AC Gateway
The BL120AC is a protocol gateway with Ethernet ports and RS-232/485 serial ports. Beilai BL120AC protocol converter supports Air Conditioning Protocols converting to Modbus RTU, Modbus TCP protocols. This protocol gateway is used for industrial air conditioning and control ...
Remote 4G IoT RTU Gateway S271 use for monitors air quality and sulfur dioxide content
Wireless Data Acquisition Module 4G IoT RTU S271 is a wireless industrial IoT data monitoring and remote control unit, which is an ideal solution for remote data monitoring, data acquisition, remote control, and real time alarm. ...
Air Conditioner Remote Monitoring by M160E Dual network port Ethernet IO module
The Ethernet IO Modules suitable for IIOT Applications and Industrial Automation systems. In Traffic Tunnel Monitoring and control system, using the Ethernet IO Module can easy to form the whole ...
