JT6311A dc electronic load

Packaging
1pc per carton
Delivery
3 Days

Modes & protection

CC, CV, CP, CR, DYNA, List, Sweep, OCP modes.

LED mode, real simulating LED loading.

Over current, over voltage, over power, over temperature, polarity reversed protection.

Automatic test alone

Press one button to complete load effect, ripple, dynamic, OCP and Short circuit test.

Show complete test report and support step test.

Multi load synchronous control

Support up to 16 loads Sync. loading & dynamic test, fit for testing multi-output power supply.

Support up to 16 loads parallel mode for high power.

High rising speed (The full range current rising time is 10us)

High speed & accuracy

With 0.03% accuracy and 500kHz frequency, the current slew rate can be programmed.

500kHz sync. sampling frequency with 15Hz data update rate, 0.03% accuracy, 10uA &100uV resolution.

Real-time measurement of Vpp/Vp+/Vp-/Ipp/Ip+/Ip-

Dynamic test and control

Up to 50kHz dynamic loading frequency & real-time measurement of peak voltage (Vp+/Vp-).

Support sync. control and sync. dynamic loading of multi loads.

Support frequency sweep up to 50kHz.

List function

8 List files, each file with 200 steps and 2us resolution.

Support up to 50kHz complex waveform editing.

Each step current slew rate can be programmed.

Automatic OCP Testing & Pmax Measurement

Automatically test OCP.

Capture automatically Pmax & the voltage and current when working at the Pmax point.

Trigger and timing measurement

Support voltage/current waveform trigger and timing measurement.

Support external trigger for the power supply startup time / hold time measurement.

Support waveform capture and test for OVP protection point and protection time.

Application of program controlling

SCPI Protocol, isolated RS232 serial port.

5V/200mA power output, fit for the interconnection of equipments with different interfaces.

TRIG_IN、RI、DFI、TRIG_OUT four high-speed isolated I/O, supporting multi loads sync.control.

Precision high speed digitizing measurement/ data capture(500kHz / 16 bits / 4096 points).

TECHNICAL DATA

Model JT6311A
Input Rating Power 150W
Voltage 0~15V 0~150V
Current 0~3A 0~30A
Min. operating voltage 1.4V@30A
Full range current rising time 10uS
CC Mode Range 0~3A 0~30A
Resolution 0.05mA 0.5mA
Accuracy 0.03%+0.05%FS
CV Mode Range 0~15V 0~150V
Resolution 0.2mV 2mV
Accuracy 0.03%+0.02%FS
CP Mode Range 150W
Resolution 16Bits
Accuracy 0.1%+0.1%FS
CR Mode Range 0.047Ω~50KΩ
Resolution 16Bits
Accuracy 0.1%+0.0001R
LED Mode Bandwidth 100kHz above
Rd Coefficient Range 0.001~1
Dynamic Operation Mode Range 10uS~50S
Resolution 2uS
Accuracy 1uS+20PPM
Slew rate 0.6A/mS~3A/uS
Voltage Meas. Range 0~15V 0~150V
Resolution 0.1mV 1mV
Accuracy 0.015%+0.03%FS
Current Meas. Range 0~3A 0~30A
Resolution 0.01mA 0.1mA
Accuracy 0.015%+0.03%FS
Ripple Meas. Range 0~15V
Bandwidth 15Hz~250kHz
Accuracy 0.03%+1mV

0.03%+10mV


  • Country: China (Mainland)
  • Business Type:
  • Market:
  • Founded Year:2011
  • Address:
  • Contact:Alan Chen
*Your name:
*Your Email:
*To:NanJing Jartul Electronics Co.,LTD
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters : 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

submiting now We do inquire for you , please wait ...

Dummy Load High Power 500W  DC to 6GHz RF Coaxial Termination Impedance 50 Ohm
Dummy Load High Power 500W DC to 6GHz RF Coaxial Termination Impedance 50 Ohm

Model Number: UIYCT500ANF6 Frequency Range: DC-6GHz Power: 500W VSWR: 1.25 Connector Type: N Female Impedance: 50Ω Our products RF Isolators RF Circulators RF Filters Power Divider/Splitter Duplexer/Triplexer Hybridge Combiner Coaxial Termination Coaxial Attenuator Directional ...

UIY Inc.

Dummy Load DC to 3 GHz Power 25W RF Coaxial Termination Impedance 50Ohm
Dummy Load DC to 3 GHz Power 25W RF Coaxial Termination Impedance 50Ohm

Model Number: UIYCT25AN3 Frequency Range: DC-3GHz Power:25W VSWR:1.15 Connector Type: N Male ...

UIY Inc.

Dummy Load DC to 12.4GHz RF Coaxial Termination 50W N Male Connector
Dummy Load DC to 12.4GHz RF Coaxial Termination 50W N Male Connector

Model Number: UIYCT50AN124 Frequency Range: DC-12.4GHz VSWR: 1.3 Power: 50W Connector Type: N Male Impedance: 50 Ω FAQ: 1. Question: when can I get the price? We usually quote within 24 hours after confirming the detailed requirements. If the situation is similar, we can quote ...

UIY Inc.