SPECIAL FINISHING WAX FOR INTERIORS

SPECIAL FINISHING WAX FOR INTERIORS

COMPOSITION

Microcrystalline waxes, Carnauba wax, beeswax, paraffin waxes, wax and resin emulsions, fluoropolymers, antifouling agent, essences, water.

PROFILE

SINTESI 3/P is a combination of various types of fine wax emulsions with stain protection properties, featuring excellent wettability and high substrate bonding ability. As well as high resistance to wear, SINTESI 3/P gives floors a satin-finish result.

IMPORTANT: for regular cleaning, do not use alcohols, or acid, solvent or ammonia based-detergents.

INTENDED USE

SINTESI 3/P is a water-based finishing wax suitable for a wide variety of materials such as: cotto, terracotta, concrete, marble and unpolished natural stone, to be used after the application of primers, such as: Linfocot, Kripton HS, Olio Dodici, Luxor FB, etc... It can be applied directly to structured surfaces made of porcelain stoneware. Suitable only for indoor surfaces, it ensures high mechanical resistance.

INSTRUCTIONS

Shake well before use. Always use at temperatures above +10°C. After the application of a primer, when the surface is dry, apply SINTESI 3/P, using a cotton cloth and brush or applicator.

If necessary, apply a second coat using the same method.

It does not require polishing. SINTESI 3/P can also be used as a dust repellent on indoor face bricks, or on porcelain stoneware with a structured surface, to facilitate maintenance, without altering the colour. Always run some test applications before applying it to the definitive surfaces.

PROS

• Integrates and completes the treatment.

• Increases stain protector action.

• Gives a very strong pearl effect finish.

• Easy cleaning.

• Simple to use.

• Gives a pleasant waxed effect finish.

• Ensures an even result.

• It does not release harmful substances during application or after.

• Pleasantly scented.

PROPERTIES

DILUTION: Ready for use.

DRYING/WALKABLE: after 2 hours.

TIME OF REACTION: 48 hours.

YIELD: Approximately 18-26 sqm/l per coat.

HOW TO CLEAN EQUIPMENT: Wash with water.

STORAGE: Closed in the original packaging, in a cool place away from frost and UV rays, it retains its properties for at least one year.

PACKAGING:

12 1-litre bottles

4 5-litre buckets

2 10-litre buckets

CHARACTERISTICS

APPEARANCE: liquid

COLOUR: milky

ODOUR: pleasantly scented

ACTIVE INGREDIENTS: 20%

PH (20°C): 8.7

SPECIFIC WEIGHT (20°C): 1.018 kg/l.

SOLUBILITY IN WATER: total

HEALTH

The product is not classified as hazardous pursuant to the provisions set forth in EC Regulation 1272/2008 (CLP).

No danger symbol is required on the label it must nevertheless be kept out of the reach of children and must not be disposed of in drain water, in order to protect the environment. We nevertheless advise you to adopt good work practices.