DEEP WATERPROOFING TREATMENT FOR OUTDOOR TERRACES
COMPOSITION
White spirit, glycol ethers, alkyl alkoxysilanes and polysiloxanes.
PROFILE
IMPRETEX MK-65 is a product that, applied to terraces and balconies, penetrates deeply interacting chemically on the surface, becoming an integral part of it and decreasing the surface tension (hydrorepellence). It is the right solution for preventing water from penetrating into the pores of the capillaries, giving real waterproofing protection.
INTENDED USE
IMPRETEX MK-65 is a product that protects surfaces from weathering and deterioration. This treatment prevents water from penetrating into the micropores and thus creating damp marks or migration of salts. Ideal for all absorbent building surfaces, such as: cotto, marble, natural stone, concrete, porcelain stoneware, etc....
INSTRUCTIONS
Before using the treatment, it is important to seal any cracks between the tiles and that they are fitted securely. Shake well before use. Always use at temperatures above +5°C. When the surface is perfectly clean and dry, apply the first coat of IMPRETEX MK-65 with a brush, applicator or cotton cloth, insisting particularly on the grouting and more porous areas. Usually 2-3 coats are enough, at intervals of approximately 1 hour between applications. On terrace floors in cotto, red stoneware or other material with high or medium porosity, the treatment must be applied to the entire surface. While if the floor is in ceramic or other non-porous material, the product must only be applied to grouting, in the event that the tile is soiled, clean immediately with a cotton cloth. After the treatment protect from water for at least 24 hours.
IMPRETEX MK-65 is suitable for special maintenance (one coat is enough) to be carried out every 2-5 years as required. Always run some test applications before applying it to the definitive surfaces.
PROS
• It makes building materials fully waterproof.
• It does not create surface films.
• It protects surfaces from weathering and deterioration.
• It does not alter permeability to water vapour.
• It also stops water infiltrations, without having to remove the tiles.
PROPERTIES
DILUTION: Ready for use.
DRYING/WALKABLE: after 2 hours.
TIME OF REACTION: 48 hours.
YIELD:
- ceramic and porcelain stoneware 30-60 sqm/l (grouting only)
- cotto or red stoneware 4-8 sqm/l
- natural stone 6-10 sqm/l
- bricks or concrete 2-6 sqm/l
HOW TO CLEAN EQUIPMENT: Wash wish white spirit.
STORAGE: Closed in the original packaging, in a cool place, away from frost and UV rays, it retains its properties for at least two years.
PACKAGING:
12 1-litre cans
4 5-litre cans
2 10-litre cans
CHARACTERISTICS
APPEARANCE: liquid
COLOUR: transparent
ODOUR: characteristic
SOLUBILITY IN WATER: insoluble
SOLVENT: white spirit
FLASH POINT: 40°C
SPECIFIC WEIGHT (AT 20°C): 0.802 kg/l
HEALTH
Hazard statements:
H226 Flammable liquid and vapour.
H304 May be fatal if swallowed and enters airways. H315 Causes skin irritation. H412 Harmful to aquatic life with long lasting effects.
Precautionary statements:
P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233 Keep container tightly closed. P273 Avoid release to the environment. P280 Wear protective gloves /eye protection / face protection. P301+P310 IF SWALLOWED: immediately call a POISON
CENTER / doctor / . . . P501 Dispose of contents / container to . . . Contains: NAPHTHA (PETROL.) HYDROTREATED HEAVY SOLVENT NAPHTHA (PETROLEUM), LIGHT AROM