The FTM(www.ft-dryer.com) industrial rotary drum dryer and sludge drying machinery is mainly composed of the revolving body, lifting plate, driving device, supporting device, sealing ring and other components. So it has the advantages of reasonable structure, perfect in workmanship, high yield, low energy consumption, convenient to operate.
Industrial rotary drum dryer and sludge drying machinery can dry many kinds of materials which contain moisture, such as coal, coal slurry, slag, industrial waste, and claystone. Rotary dryer is widely used in building materials, metallurgy, and chemical industry. Industrial rotary drum dryer and sludge drying machinery are handling by bringing it into direct contact with a heated gas. The dryer is made up of a large, rotating cylindrical tube, the dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under.
The wet material by belt conveyor or bucket elevator to the hopper, then flowing through the feeding hopper feeder pipe into the feed end. The feed pipe slope is more than the natural inclination of the materials, so the material can fly into the dryer naturally. The dryer cylinder is slightly into a horizontal rotating cylinder. The materials were added from the higher end.while the heat carrier flows from the lower to enter into countercurrent contact with the material, the heat carrier, and material together and flows into the cylinder. Run with the rotation of the cylinder material by gravity to the lower end. The wet material directly or indirectly gets the heat in the process of moving forward of the cylinder body, so that the wet material turns to be dried, and then was sent in the discharge end by a belt conveyor or screw conveyor.