Detection Gas | Carbon Monoxide |
Detection Range | 0 ~ 1000 ppm |
Maximum Overload | 1500 ppm |
Output Signal | 70±15 nA/ppm (*) |
Repeatability | ±2% (*) |
Resolution | 1 ppm (*) |
Typical Baseline Range (Pure air) | -2 ppm to +3 ppm (*) |
Typical Response Time (t 90 ) | < 30 sec (*) |
Baseline Shift (-20 ~ 50˚C) | < 10 ppm (*) |
Long Term Output Drift | < 5% /year (*) |
Expected Life Time | 3 years (*) |
Operating Temperature | -20 ~ 50˚C |
Operating Humidity | 15 ~ 90% RH |
Operating Pressure Range | 1013 hPa±10% |
Recommended Load Resistor | 10Ω |
Bias Voltage | Not required |
Position Sensitivity | None |
Recommended Storage Temp. | 0 ~ 20˚C |
Storage Life | 6 months |
Cap Color | Red |
Weight | 4.5g (approx.) |
(*) Performance data conditions: 20 ˚C , 50%RH and 1013 hPa.
QC102 NDIR infrared carbon dioxide sensor is a common type, small size sensor, using non-dispersive infrared (NDIR) principle to detect the existence of CO2 in the air, with good selectivity, non-oxygen dependent and long life. Built-in temperature compensation; and it has UART ...
SH-300-NDTH NDIR Carbon Dioxide Sensor Module Features • Best Extremely Precise Sensor • Quick Response Time • Long Time Use, Stable performance at High & Low Temperature • Waterproof Filter for anti static filters fine dust and humidity in the air • One-way air ...
CO-BF Carbon Monoxide Sensor Description Alphasense Carbon Monoxide gas sensors operate using proven fuel cell technology. CO-BF Carbon Monoxide Sensor sizes: 32mm diameter package, the best choice for fixed site applications The Alphasense family of CO sensors CO-BF Carbon ...