ZM608TSDH electrical,hydraulic control technology training equipment(transparent)is used in the technical schools,vocational schools,colleges universities and laboratories for experiments as below:
1.The reversing loop manual reversing valve.
2.Use the lock loop of a valve function.
3.With the hydraulic control valve to closed loop adjustment.
4.Pessure setting circuit.
5.Two stage pressure control loop.
6.Vacuum circuit valve.
7.Loop pressurized cylinder, turbocharged.
8.Use the uninstall loop H type reversing valve.
9.Oil inlet throttle governing circuit.
10.Return to the oil throttle governing circuit.Reversing speed control circuit.
11.Speed gear pump,composite control loop
12.Speed gear pump and valve components.
13.Flow valve short connection speeds in the hydraulic circuit.
14.Using the speed control valve series with two feed.
15.Two feed speed control valve in parallel.
16.With the order of action loop sequence valve.The sequential action of loop
17.Pressure relay back.
18.A travel switch sequence loop control.
19.With the order of action trip loop reversing valve.Synchronous loop
20.Series hydraulic cylinder.
Technical information:
1.Size:1600X800X1800mm(LxWxH).
2.Power supply:AC220V,50HZ.
3.Direct power supply input:AC220V,output:DC24V/3A.
4.Hydraulic training pump motor power:400W,speed range:0-1500r/min.
Size:550mm×350mm×600mm(LxWxH).
5.Programmable control unit(PLC):Mitsubishi FX1S-20MR host,12 input,8 output(relay output).
6.Noise is less than 58dB if the distant from hydraulic pump hydraulic station is more than 1.5m.
7.Electromagnetic reversing valve:AC42V,suction :30N.
China Runbao Training Equipment Co.,Ltd
Tel:86-536-8210932
Fax:86-536-8210932
Mobile:86-18553683200
E-mail: equipment@cn-equipment.com
Web site: www.cn-equipment.com
Contact Person: Mrs.Zhu Jing
Address:2-907,5999#,beigong east road,kuiwen district,Weifang city,Shandong,China 261041