Epoxy Primer

Product Introduction
It’s composed of epoxy resin, pigment, environmental protection rust-proof filler, solvent, additives as paint part, and Polyamide as curing agent part.
Product Features
Flat film, fast drying, hard film, Wearable, Low temperature curing performance, Excellent water resistance and chemical resistance, good adhesion on various metal substrates, excellent resistance to high and low temperature performance
Construction Method
Air spray
Use Note
Put the curing agent into the paint according to the ratio before painting, and the qty should be according to the requirements, use it within 8hours after mixing.
Keep the tools dry and clean;
Keep the surface clean, no moisture, no acid and alkali;
Keep the painting process far away from water, acid, alkali, alcohol and other contact.
Curing agent is easy to react with water, alcohol and other things, the hardener drum must be covered in order to avoid damaged by damp cementation;

The working humidity shall not be greater than 80%, otherwise it will cause serious film foam

Related cases

Case Diagram Of Agricultural Machinery Industry