LFP Fiber Media Converter

Description: Baudcom BD-100M-LFP series Ethernet Media Converter translates transmission signals from a twisted-pair 10/100Base-Tx to 10/100Base-FX fiber optical cable. The media converter can support LFP function(Link Fault Pass through),and jumbo frame.

Features:

• Conforms to IEEE802.3,IEEE802.3u (10Base-T,100Base-TX,100BaseT-FX) international standard;
• support LFP function
• brings 1M buffer, supports 2KMAC address;
• isolates network conflict and broadcasting package effectively, has the function of preventing broadcasting storm;
• supports 802.1Q and 16 groups of VLAN;
• multi- mode connection: transmitting maximrange can reach 5 kilometers ;
• single-mode connection:transmitting range can reach 120 kilometers.
• built-in power supply or built-out power supply;
• support both 10/100M full/half duplex adapt and compulsive set 10M,100M,full duplex, half duplex, then convenient to connect CPE and protect previous invest when network upgrades;
• can set work modes (straight mode or forward mode)

Specifications:
Optical Port:
Support 100Base-FX
1) Adopt standard 1*9 pin optical transceiver module;
2)Wavelength: 850nm or 1310nm in multi-mode,
1310nm or 1550nm in single-mode;
3)SC/ST/FC optical connectors are selectable.
4)Transmission distance:Up to 120km ;

Ethernet Copper Port:
Data rate: 10/100Mbps;
1)Auto-negotiate on Full/Half duplex topology;
2)Connector: UTP RJ45 connector
3)Auto MDI/MDI-X

environment condition Dimension
Operating temperature: 0C~+50 C 118(W) × 70 (L) x 27(H) mm
Storage temperature: -20 C~+70 C
Relative temperature:95% (uncondensed)
Power supply
working voltage range wide, good
anti-disturb and Isolation, work stable
option I - DC-48V,range DC-36V~DC-72C
option I - AC220,range AC160V~AC240V

Related Link:

LFP (Link Fault Pass through) Introduction