Features:
Parameter and specifications
E1 interface rear panel with 75ohm
Standard: E1 interface compatible with G.703 standard.
Rate: 2.048Mbit/s?50ppm
Coding: HDB3
Impedance: 75ohm ( unbalance) or 120ohm (balance)
Connector: BNC (75ohm) or RJ45 (120ohm)
Jitter: According to G.742 and G.823 rear panel with 120ohm
Ethernet interface
Rate: 10M/100M, full/half duplex auto-adapt.
Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN)
MAC address table: 4096 MAC addresses.
Ethernet buffer: 64Mbits SDRAM
Physical interface: RJ45, support AUTO-MDIX (cross over and straight through auto-adapt)
Dimension
19inch rackmount type:433 mm(L)×138mm(W)× 44 mm(H)
Operating environment
Voltage: DC-48V , input range: DC-36V~DC-72V
Power Consumption: <=5 Watts
Working temperature: 0C~50C
Storage temperature: -40C~+70C
Humidity: 95%
No causticity and solvent, dust free, and no strong magnetic interference.
Application:
BA111 BAS industrial protocol gateway is designed to transmit communications from BACnet devices to Modbus devices for intelligent building management. ⚪Downlink Supports BACnet/IP, BACnet MS/TP, Modbus RTU, Modbus TCP ⚪Uplink Supports Modbus RTU, Modbus TCP ⚪Supports SNMP ...
The BL103 is an industrial gateway with Ethernet ports and RS-232/485 serial ports. BL103 industrial gateway supports Siemens, Mitsubishi, Omron, Delta, and other PLC protocols converting to OPC UA protocol. The PLC to OPC UA industrial gateway supports PLC remote monitoring, ...
Modbus to MQTT Industrial IoT gateways ensure that OT device data is propagated in the cloud for production monitoring. BLIIoT BL101 protocol IoT gateway supports Modbus RTU, Modbus TCP converting to MQTT protocols. ⚪Downlink Supports Modbus RTU Master, Modbus TCP Master, PLC ...