H Beam

Specification: OD:100*100-900*300

WT: 5-34mm

LENGTH: 5.8/6/11.8/12M or 16M max.

Standard: GB/T 11263 2010/JIS G3192/ GB/T 707-1988/ BS4-1 1993/ EN10034 1993/ EN 10029/ASTM A6-A6M /JIS G31301/GB/T 33814-2017

Process Type: Hot Rolled, Electric Resistance/High Frequency Welded

End: Square Cut, Plain End, Burr Removed

Surface: Bare/Painted/Light Oiled/Galvanized/Zinc Coating/Primering/Powder Coat

Marking: Stenciling/Embossing/Printing or As customer required.

Packing: Bundles with strips, Waterproof Paper Wrapped or as clients requirment.

Here is a kind of method of transport for the square steel pipe I’ve seen on my way home. From the picture, can you tell us the right and wrong points?

As far as I’m concerned, here are some points we need to pay attention to.

First of all, there is no protection for pipe’s end. We should use plastic plugs in both ends to make quality of each end.

Then, for the method of packaging, it may not so proper. Hexagonal bundles of max is necessary for these square steel pipes. Of course, with several steel strips are also okay.

What’s more, wrapped these steel pipes in waterproof paper may be important. What should we do to keep the high quality of pipes if we meet the rain day?

In general, there are so many points we need to focus on for the transportation of the steel pipes.