MGC1.7-6Stationary pontoon car

Introduction of mgc1.7-6 stationary car and box car

Mgc1.7-6 stationary box-type harvesters are mainly used for the transportation of coal and gangue.Because the car box is fixed on the frame, the tipper or other special equipment must be used in unloading.The mine car can realize the requirement of continuous unhooked tip-over.The car is simple in structure, easy to manufacture, durable and convenient in maintenance.

Mgc1.7-6 fixed car box mining car is mainly composed of car box, car frame, wheel axle, traction chain and pin type anti-slip bolt.

Mgc1.7-6 fixed tank car maintenance and maintenance

1. Regularly replace the wheel shaft bearing grease.The bearing shall be cleaned every 3 months and no. 3 calcium base grease shall be replaced.The amount added is 65 ~ 80% of the oil storage cavity.

2. The harvesters shall be repaired regularly every 3 months.

3. When the wheel and axle are assembled, it shall not be knocked randomly with a sledge hammer, but shall be pressed into the wheel and axle with no impact.

4. When mining cars are not in use, they are generally stored in open air.Regular inspection shall be carried out on the harvesters with long storage time.

Mgc1.7-6 fixed tank car parameters

Serial number item characteristics

1 capacity of 1.7 m3

2 gauge 600 mm

3 wheelbase 750 mm

4 external dimensions (length x width x height) 2400 x 1050 x 1200mm

Rated traction: 60KN