MCC2.5-6One side curved rail side unloading car

Introduction of McC2.5-6 single-curved rail side unloading car

McC2.5-6 single-side curved rail side unloading car is composed of wheel sets, frame, pin shaft, carriage, unloading curve rail, tipper wheel, pin shaft, door hook, carriage door, support iron rod and other parts.It is mainly used for tunneling and construction of metallurgy, mining, coal mine, railway, highway tunnel, hydraulic culvert, underground mine drift and military culvert.

Technical requirements for McC2.5-6 single-curved rail side unloading car

A. components of the same model mining car should be interchangeable;

B, wearing parts, etc., should be easily replaced, lubrication points should be reasonable and adjustment devices should be flexible;

C, under normal conditions of use, the service life of car body shall meet the following requirements, such as: car volume m3:4.0 ㎜ trunk plate thickness: the vehicle weight 6 kg: lifetime h 323 3000

D. The welded structural parts shall adopt carbon dioxide protection welding, and the quality shall conform to the requirements of JB/ t5000.3-1998;E, harvesters buffer using metal play Hong Hong or high strength rubber bullets;

F. The wheels of the ore adopt elastic shafts;

G. The connection between the tipper and the carriage should be firm and reliable. The contour of the tipper shall not be beyond the overall size of the harvester when it is not tipper.

The relevant technical requirements of h, carriage, frame and door shall comply with the following table:

The technical requirements

Car door and car discharge outlet flatness 4.0 ㎜ or less

The doors, car acuities were 4.0 ㎜ clearance of discharge outlet

The door, car and car unloading port diagonal distance difference 8.0 ㎜ or less

Each pin hole on the frame, door, car alignment ﹤ 2.0 ㎜

The longitudinal center parallelism of the common axis of each group pin hole on frame, door and carriage is 2.0%

I, buffer spring Hong compression performance test shall be conducted according to GB/T1239.4;

Technical parameters of McC2.5-6 single-curved rail side unloading car

Model: McC2.5-6 single-side curved rail side unloading car;

Volume: 2.5

Loading capacity: 6250;

Track: 600;

Length * width * height: 3000*1250*1300;

Wheelbase: 1000;

Wheel diameter: 400;