MGC1.1-6Afixed mine wagon

Introduction of mgc1.1-6a stationary ore car products

Mgc1.1-6a fixed ore-car used in the mine to transport coal, ore, waste and other bulk materials in the narrow rail transport vehicles, general to be drawn by locomotive or winch.Mgc1.1-6a stationary ore car is composed of frame, wheel set and buffer. If you need coupling or the baffle of the cart, please indicate it when ordering.

Description of the structure of mgc1.1-6a stationary harvester

Mgc1.1-6a fixed harvester box and frame are fixedly connected, and the harvester must be turned over to unload.Its basic composition is car box, car frame, buffer, joint and travel mechanism.The frame is a metal structure, which can withstand the traction force, braking force, the impact force between the mining car and the rail impact buffer at both ends of the frame, to ease the impact force between the two cars.Coupler is the part that connects locomotive and harvester, commonly used have bolt link and rotary chain, big harvester USES the automatic coupler that has buffer action concurrently.The walking mechanism consists of four wheels and two shafts.When the sum of mining cars and materials exceeds 20 tons, the number of wheel sets shall generally be increased.For mining cars with more than two wheel pairs, two wheel pairs are formed into a small car with a rotary table to facilitate passing through the bend, which is called a bogie.

Mgc1.1-6a fixed harvester technical parameters

Model: MGC1.1-6

Volume: 1.10 m3

Nominal capacity: 1 ton

Maximum loading: 1.8 tons

Gauge: 600 mm

Dimensions: 2000mm long 880mm wide 1150mm high

The wheelbase: 550 mm

The wheel diameter: 300 mm

Traction height: 320mm