16Voice Phone plus 4Gigabit Ethernet Fiber Multiplexer

Overview

16voice phone fiber multiplexer is point to point fiber transmitting equipment, which is designed on large scale integrated circuit, realizes 1~4 E1 circuit, 1~4channels 10/100/1000M Ethernet, 16 channel voice (FXO/FXS) and 1~2 channel RS232. Its merits include complete warning function, high integration, low consumption, stable performance and convenient usage. In the 16channel voices, the FXS and FXO can be combinated freely, for example,8*FXS+8*FXO.

Feature

• Provides1~ 4 channel E1/ G.703 for option;
• provides 1~4 channel 1000M (line) Ethernet ports for option;
• provides 16 channel voice port, FXO and FXS for option;
• provides1~2 channel RS232, rate supports 300-15200 bps for option;
• Ethernet port 10/100/1000M, full/half duplex auto-adaptable and supports VLAN;
• Ethernet port supports AUTO-MDIX (twisted cable and straight cable auto-adaptable);
• 1-16 channel voice connection, supports calling indication;
• Configuration: point to point;
• Voice port supports O port and S port, O port connects switch and S port connects user’s phone;
• Optical interface supports SC/FC interface and supports single fiber interface

• Power can support DC48V or AC220V or AC+DC

16voice+4GE fiber multiplexer back panel picture

Optical interface

Optical wavelength: single mode 1310nm/1550nm

Fiber: single fiber or double fiber for option

Transmitting consumption: -9dBm/-5dBm

Transmission range: 0-50Km/120Km for option

Optical interface: SC/FC

Receiving and dispatching module: >-6dBm

Optical receiver receiving sensitivity <-36 dBm (BER<10-11)

Fiber circuit code: NRZ code

FXS:

Alarm voltage: 75V

Alarmf requency: 25HZ

2 line input impedance: 600Ω (hanging off)

Wastage: 40db

FXO:

Alarm detecting voltage: 35V

Alarm detecting frequency: 17HZ-60HZ

2 line input impedance: 600Ω (hanging off)

Wastage: 40db

10/100/1000M Base-T Ethernet Interface

Rate: 10/100/1000M, full/duplex auto-negotiation

Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Address Entiries: 4096 Entiries

Total Memory Sizes: 64MBits SDRAM

Physical interface: RJ45, support AUTO-MDIX

E1 Interface

Interface standard: Conforms to G.703 standard

Interface rate: N×64Kbps, N:1～32

Vibration characteristic: Satisfies G.742 and G.823 standard

Transmission capacity: 1*E1

Clock type: internal-clock, route clock

Connecter: BNC (75 Ω

Interface impedance: 75Ω(non- balanced)

RS232 port

Rate： 300－115.2Kbps auto-adaptable (Asynchronous)

Interface characteristic： satisfies ITU-T V.24 standard

Connector：RJ45

Dimension

19inch 1U high rack mount 433mm(L)x238mm(W)x44mm(H)

Environment condition

Operating temperature: 0C~+50 C

Storage temperature: -20 C~+70 C

Relative temperature:95% (uncondensed)

Power supply

working voltage range wide, good

anti-disturb and Isolation, work stable

option I – DC-48V,range DC-36V~DC-72C

option II – AC220V,range AC90V~AC260V

Power Consumption: <=3 Watts