Steel Post for wood fencing is engineered to provide you with the strength of steel without sacrificing the natural beauty of wood. Constructed of structural steel with a heavy galvanized coating, this steel fence post can withstand high winds and heavy rain and will never rot or warp. We guarantee it - every steel post is backed by a 15-year limited warranty. We provide longevity and performance in a wood fence system which results in uncompromised value.
Specifications
• Easily Concealed(Post Easily Hidden From View)
• The Strength of Steel and the Beauty of Wood
• Withstand a 73mph wind load (6' Privacy fence with posts spaced every 8')
• Will Not Shrink, Warp or Rot
• Limited Lifetime Structural Warranty
• Made from recycled steel.
Installation
• This Steel Post is tall enough to be sunk at least 24″ below ground and reach your desired fence height.
• 2×4 Rails – 6′ fences typically use 3 rails
• Fence Boards in whatever style you like. A board at least 4″ wide is needed to fully cover the PostMaster from view.
• Corner Clips for attaching the rails at the corners.
• #8 x 1-1/4″ Truss Screws, available at most hardware stores. 6 screws for each rail.
• #8 x 3/4″ Truss Screw, Available at most hardware stores. 4 per each corner post needing to be covered.
• #12 x 1/2″ Hex Head Screws, available at most hardware stores. 4 per gate post.
• Concrete for each fence post.
• Gate Hardware: Hinges, Latches, and Drop Rods for each gate.
STEEL FENCE POSTS-METAL FENCE POST, GARDEN U POST FOR FENCING, ROUND FENCE POST Fence posts are mostly powder coated steel posts, falling into T post, Y post, Euro style, Australia and America styles. Powder-coated steel fencing posts are steel posts coated with a protective ...
Posts are manufactured conforming to FHWA and ATSSA standard. Steel material conforms to ASTM A1011, Grade 50. Yield strength after cold-forming is 60,000 psi minimum. Posts are manufactured from hot-dipped galvanized steel conforming to ASTM A653, G90 or G140. The posts are ...
Posts are manufactured conforming to FHWA and ATSSA standard. Steel material conforms to ASTM A499, Grade 60. All kinds of specification including 1.12lbs/ft, 2.00lbs/ft, 2.03lbs/ft, 2.08lbs/ft, 2.10lbs/ft, 2.25lbs/ft, 2.50lbs/ft and more. 3/8\'\' or 7/16\'\' diameter holes on ...