Polyurethane Machinery Spray Blended Polyol for Rigid Foam

Place Of Origin
china
Minimum Order
1
Packaging
220kg/drum
Delivery
15 Days
Blend Polyol SDA13E
Spray Rigid PU Foam For Cold storage
DESCRIPTION
SDA13E cold storage insulation system blend polyol is a kind of spray rigid PU foam blend polyol, specially used for the insulation of the wall of storage insulation. It used together with isocyanate(PM-200) to make rigid PU foam through PU spray machine. The foam produced has the characteristics as following:
  1. The strong adhesive force, convenient construction and no seams.
  2. The low thermal conductivity, low water absorption and good dimensional stability.
  3. The long service life.
TYPICAL PHYSICAL PROPERTIES
Physical Properities Test Method Metric Value
Core Density GB/T 6343-2009 kg/m3 45.3
Compressive Strength GB/T 8813-2008 kPa 264
Tensile Strenght GB/T 9641-88 kPa 136
Oxygen index GB/T 2406.2-2009 % 23.4
Initial Thermal Conductivity GB/T 10294-2008 W/(m·K) 0.022
Close Cell Content GB/T 10799-2008 % ≥88
Water Absorption GB/T 8810-2005 % ≤3
Dimensional Stability
(Foam made After 6 days)
-25ºC GB/T 8811-2008 % ≤±1
≤±1
70ºC
Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.
Other unmentioned matters and TDS&MSDS.Please visit our official website www.shundapu.com
Or please contact us for information:
Tel: +86 535 6739386.
------------------------------------------------------------------
DESCRIPTION
SD1133 cold storage insulation system blend polyol is a kind of spray rigid PU foam blend polyol, specially used for the insulation of the wall of storage insulation. It used together with isocyanate(PM-200) to make rigid PU foam through PU spray machine. The foam produced has the characteristics as following:
  1. The strong adhesive force, convenient construction and no seams.
  2. The low thermal conductivity, low water absorption and good dimensional stability.
  3. The long service life.
TYPICAL PHYSICAL PROPERTIES
Physical Properities Test Method Metric Value
Core Density GB/T 6343-2009 kg/m3 45.3
Compressive Strength GB/T 8813-2008 kPa 264
Tensile Strenght GB/T 9641-88 kPa 136
Oxygen index GB/T 2406.2-2009 % 23.4
Initial Thermal Conductivity GB/T 10294-2008 W/(m·K) 0.022
Close Cell Content GB/T 10799-2008 % ≥88
Water Absorption GB/T 8810-2005 % ≤3
Dimensional Stability
(Foam made After 6 days)
-25ºC GB/T 8811-2008 % ≤±1
≤±1
70ºC
Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.
COMPONENT PRODUCT SPECIFICATIONS
Property Blend polyol
SD1133
Polymeric MDI Pm200
Appearance Pale yellow liquid. Brown liquid
Specific gravity at 25°C 1.10±0.10 g/cm3 1.22-1.25 g/cm3
Viscosity at 25°C 300±100 cps 200±50 cps
Shelf life 3 months 12 months
REACTIVITY PROFILE
Cream Time Gel Time Rise Time
0-1 s 2-3 s 4-6 s

INSTALLATION GUIDELINE
SD1133 Ambient Temperatures Spraying Temperatures Minimum Spray Pressures
Summer 10-35ºC 35-41ºC 5516kPa (800 psi)
Sping~Autumn 0-15ºC 35-45ºC 5516kPa (800 psi)
Winter -10-5ºC 35-50ºC 5516kPa (800 psi)
SD1133:PM200=1:1(volume ratio)
Foaming Machine:Polyurethane Rigid foam Spray Machine
ADDITIONAL INFORMATION
  1. Maximum per pass thickness is 35mm,Spraying thicker can result in spontaneous combustion and poor overall spray foam quality
  2. Internal temperature of installed pass must be 25ºC before installing subsequent passes Maximum thickness during 24h period is 203mm(8inches)
  3. Like most of foam product,foam made by SD1133is combustible,An thermal barrier must be installed in accordance with approved construction standards SD1133
  4. The service temperature of the foam with SD1133 is between -60~80ºC.
PACKING SPECIFICATION
220KGS/Drum, Blue paint or Zinc coating drums (Drum Weight: 18-23kg)
STORAGE RECOMMENDATIONS
The blend polyol should be stored in the sealed container to avoid the absorption of water vapor. During the transportation, it should avoid serious shake and strong sunlight. It should be stored in ventilated place, avoiding light, water and fire. Recommended storage temperature is 15
~25ºC.
Shelf life: 6 months, please test before using after 6 months storage.


  • Country: China (Mainland)
  • Business Type: Manufacturer
  • Market:
  • Founded Year:1996
  • Address:
  • Contact:Mimi Liu
*Your name:
*Your Email:
*To:Yantai Shunda Polyurethane Co.,Ltd
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters : 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

submiting now We do inquire for you , please wait ...

Polyether polyol for rigid polyurethane foam

Purity:99.9% Model Number:XRD-835H Place of Origin:Shandong China (Mainland) the polyol is a transparent mucilaginous liquid with steady character.a little especially odor,innocuous ,no corrosive. ...

Shandong Xinruida Chemical Industry Co., Ltd.

Polyether polyol for rigid polyurethane foam

Purity:99.9% Model Number:XRD-888 Place of Origin:Shandong China (Mainland) the polyol is a transparent mucilaginous liquid with steady character.a little especially odor,innocuous ,no corrosive. ...

Shandong Xinruida Chemical Industry Co., Ltd.